SolidWorks 2011 | 68D92DBAED7A3FC47C83AFD0D7132A35C346788F

SolidWorks 2011

Name	SolidWorks 2011	DOWNLOAD Copy Link
Total Size	10.3 GB
Total Files	836
Hash	68D92DBAED7A3FC47C83AFD0D7132A35C346788F

/Case Studies/Basic Mechanisms/
2.Part Exercises - 3.Rose Cover 1.flv	45.3 MB
2.Part Exercises - 1.Handle 1.flv	40.3 MB
3.Creating the Assembly - 2.Final Assembly.flv	34.8 MB
3.Creating the Assembly - 1.Latch Sub-Assembly.flv	31.7 MB
2.Part Exercises - 8.Latch.flv	31.6 MB
2.Part Exercises - 4.Rose Cover 2.flv	29.3 MB
2.Part Exercises - 6.Latch Plate.flv	28.0 MB
2.Part Exercises - 7.Face Plate.flv	22.2 MB
2.Part Exercises - 5.Lock Mechanism.flv	19.3 MB
2.Part Exercises - 2.Handle 2.flv	8.1 MB
1.Introduction - 1.Introduction.flv	6.4 MB
/2011 SolidWorks Simulation/
3.Meshing - 10.Mesh Refinement.flv	43.7 MB
10.Adaptive Methods - 3.The H-Adaptive Method.flv	27.2 MB
3.Meshing - 8.Mixed Shell Solid Mesh.flv	27.0 MB
4.Beam Analysis - 3.Truss Analysis.flv	26.6 MB
11.Temperature Load - 2.Temperature Load.flv	25.8 MB
5.Static Analysis of an Assembly - 4.Refining Contact Conditions.flv	25.5 MB
8.Using Connectors - 6.Bolt Connector.flv	24.3 MB
2.Static Analysis of a Part - 13.Results Displacement.flv	24.2 MB
3.Meshing - 9.Simplifying Geometry.flv	23.9 MB
3.Meshing - 11.Meshing Tips.flv	23.2 MB
10.Adaptive Methods - 4.The P-Adaptive Method.flv	21.3 MB
4.Beam Analysis - 2.Weldment Analysis Results.flv	20.4 MB
11.Temperature Load - 3.Soft Spring and Inertial Relief.flv	20.2 MB
6.Shrink Fit Analysis - 3.Shrink Fit Results.flv	19.4 MB
5.Static Analysis of an Assembly - 5.Processing and Results.flv	19.0 MB
3.Meshing - 4.Meshing Options.flv	19.0 MB
8.Using Connectors - 5.Spring Connector.flv	19.0 MB
3.Meshing - 2.Solid vs. Shell Mesh.flv	18.8 MB
5.Static Analysis of an Assembly - 2.Assembly Analysis Setup.flv	18.5 MB
3.Meshing - 7.Shell Analysis Results.flv	18.4 MB
2.Static Analysis of a Part - 7.Processing.flv	18.3 MB
15.User Libraries - 2.Analysis Libraries.flv	18.0 MB
7.Large Displacement Analysis - 3.Large Displacement Results.flv	17.9 MB
4.Beam Analysis - 1.Weldment Analysis Setup.flv	17.8 MB
9.Using Design Scenarios - 2.Setup and Parameters.flv	17.7 MB
2.Static Analysis of a Part - 5.Operating Environment Fixtures.flv	17.6 MB
2.Static Analysis of a Part - 15.Results Factor of Safety Plot.flv	17.4 MB
9.Using Design Scenarios - 4.Design Scenario Results.flv	17.2 MB
2.Static Analysis of a Part - 9.Results Stress Plot.flv	17.0 MB
9.Using Design Scenarios - 3.Defining Design Scenarios.flv	16.9 MB
8.Using Connectors - 7.Spot Weld.flv	16.3 MB
3.Meshing - 5.Mid-Surfaces Shell Alignment.flv	16.2 MB
2.Static Analysis of a Part - 10.Results Adding Plots.flv	16.2 MB
8.Using Connectors - 4.Link Connector.flv	16.0 MB
3.Meshing - 3.Sheet Metal Analysis (Using Shell Mesh).flv	15.5 MB
2.Static Analysis of a Part - 11.Results Section Clipping.flv	15.3 MB
12.Personalization Options - 5.Plot Options.flv	14.9 MB
2.Static Analysis of a Part - 12.Results Iso Clipping.flv	14.6 MB
8.Using Connectors - 2.Rigid Connector.flv	13.9 MB
8.Using Connectors - 3.Pin Connector.flv	13.8 MB
15.User Libraries - 1.Material Libraries.flv	13.2 MB
14.Fixtures A Reference - 9.Bearing Fixture.flv	12.3 MB
6.Shrink Fit Analysis - 2.Setting Up a Shrink Fit Study.flv	12.3 MB
1.Introduction - 2.Design Validation.flv	11.9 MB
5.Static Analysis of an Assembly - 3.Creating Contact Conditions.flv	11.7 MB
7.Large Displacement Analysis - 2.Large Displacement Setup.flv	11.6 MB
12.Personalization Options - 3.Mesh Options.flv	11.4 MB
12.Personalization Options - 4.Results Options.flv	11.4 MB
2.Static Analysis of a Part - 6.Operating Environment External Loads.flv	11.3 MB
3.Meshing - 6.Using Multiple Studies.flv	11.2 MB
13.External Loads A Reference - 5.Remote Load.flv	10.7 MB
15.User Libraries - 3.Using Library Items.flv	10.3 MB
12.Personalization Options - 1.System Options.flv	10.0 MB
13.External Loads A Reference - 2.Force.flv	9.3 MB
12.Personalization Options - 2.Units and Symbol Display.flv	9.2 MB
1.Introduction - 3.Assumptions.flv	9.1 MB
2.Static Analysis of a Part - 4.Creating a Study.flv	8.2 MB
14.Fixtures A Reference - 5.Use Reference Geometry.flv	8.2 MB
14.Fixtures A Reference - 4.Symmetry.flv	7.2 MB
2.Static Analysis of a Part - 14.Results Factor of Safety.flv	7.0 MB
8.Using Connectors - 1.Connectors Overview.flv	6.9 MB
7.Large Displacement Analysis - 1.Large Displacement Overview.flv	6.9 MB
10.Adaptive Methods - 2.Standard Adaptive Method.flv	6.9 MB
10.Adaptive Methods - 1.Adaptive Methods Overview.flv	6.8 MB
13.External Loads A Reference - 6.Bearing Load.flv	6.6 MB
2.Static Analysis of a Part - 3.Analysis Setup.flv	6.3 MB
13.External Loads A Reference - 1.Pressure.flv	6.0 MB
2.Static Analysis of a Part - 2.Activating Simulation.flv	5.4 MB
14.Fixtures A Reference - 6.On Flat Face.flv	4.6 MB
2.Static Analysis of a Part - 8.Results Overview.flv	4.2 MB
3.Meshing - 1.Meshing Overview.flv	4.0 MB
14.Fixtures A Reference - 1.Fixed Geometry.flv	3.5 MB
14.Fixtures A Reference - 7.On Cylindrical Face.flv	3.3 MB
14.Fixtures A Reference - 8.On Spherical Face.flv	3.2 MB
1.Introduction - 1.Welcome.flv	3.2 MB
9.Using Design Scenarios - 1.Design Scenarios Overview.flv	3.2 MB
14.Fixtures A Reference - 2.RollerSliding.flv	3.1 MB
13.External Loads A Reference - 4.Centrifugal Load.flv	3.1 MB
5.Static Analysis of an Assembly - 1.Analysis of an Assembly Overview.flv	2.9 MB
13.External Loads A Reference - 3.Gravity.flv	2.8 MB
6.Shrink Fit Analysis - 1.Shrink Fit Overview.flv	2.7 MB
11.Temperature Load - 1.Temperature Load Overview.flv	2.4 MB
2.Static Analysis of a Part - 16.Results Summary.flv	2.3 MB
14.Fixtures A Reference - 3.Hinge.flv	1.9 MB
2.Static Analysis of a Part - 1.Overview.flv	1.7 MB
/.../Advanced Surfacing Models/
2.Detergent Bottle - 19.Remaining Fillets and Thread.flv	42.1 MB
3.Candle Holder - 18.Scroll on Legs.flv	39.1 MB
2.Detergent Bottle - 16.Creating the Label Inset.flv	35.7 MB
3.Candle Holder - 12.Leaf Details.flv	32.1 MB
3.Candle Holder - 9.Thumb Rest Setup.flv	29.1 MB
2.Detergent Bottle - 4.Creating the Front Surface.flv	29.0 MB
3.Candle Holder - 11.Leaf Free Form Shape.flv	29.0 MB
2.Detergent Bottle - 8.Making the Handle.flv	28.2 MB
2.Detergent Bottle - 12.Blending the Handle Bottom.flv	24.9 MB
3.Candle Holder - 16.Filleting and Patterning the Ivy.flv	23.8 MB
2.Detergent Bottle - 11.Blending the Handle Top.flv	21.8 MB
3.Candle Holder - 15.Wrapping the Ivy.flv	21.6 MB
3.Candle Holder - 10.Completing the Thumb Rest.flv	21.4 MB
1.Pasta Scoop - 19.Remaining Prongs and Holes.flv	21.1 MB
2.Detergent Bottle - 6.Making the Back Surface.flv	20.5 MB
1.Pasta Scoop - 25.Mirror and Repair.flv	19.5 MB
3.Candle Holder - 14.Wrapped Ivy Setup.flv	19.2 MB
3.Candle Holder - 8.Finger Loop.flv	18.2 MB
3.Candle Holder - 17.Decorative Bead Pattern.flv	17.5 MB
3.Candle Holder - 13.Leaf Pattern.flv	16.8 MB
2.Detergent Bottle - 18.Applying a Multi-thickness Shell.flv	16.7 MB
3.Candle Holder - 6.Handle Transition as Solid.flv	16.5 MB
2.Detergent Bottle - 15.Adding the Spout and Fillets.flv	16.3 MB
2.Detergent Bottle - 10.Preparing the Handle Top.flv	15.1 MB
2.Detergent Bottle - 3.Developing a Strategy.flv	14.8 MB
1.Pasta Scoop - 4.Inserting the Sketch Picture.flv	13.9 MB
1.Pasta Scoop - 9.Curvature.flv	12.9 MB
1.Pasta Scoop - 23.Handle-top Shape.flv	12.9 MB
3.Candle Holder - 7.Handle Transition as Surface.flv	12.6 MB
1.Pasta Scoop - 26.Completing the Scoop.flv	12.5 MB
1.Pasta Scoop - 11.Spline Settings.flv	12.0 MB
2.Detergent Bottle - 9.Blending the Front and Back Faces.flv	11.6 MB
1.Pasta Scoop - 7.Spline Handles.flv	11.5 MB
1.Pasta Scoop - 15.Creating the Parting Line Curve.flv	11.4 MB
2.Detergent Bottle - 20.Calculating the Volume.flv	11.3 MB
2.Detergent Bottle - 13.Bottle Neck and Bottom.flv	11.2 MB
1.Pasta Scoop - 2.Overview.flv	11.1 MB
3.Candle Holder - 5.Sweeping the Handle.flv	10.8 MB
2.Detergent Bottle - 5.Making the Label Surfaces.flv	10.7 MB
1.Pasta Scoop - 16.The Outer Surface.flv	10.1 MB
1.Pasta Scoop - 18.First Set of Prongs.flv	9.7 MB
2.Detergent Bottle - 17.Adding the Dome.flv	9.5 MB
1.Pasta Scoop - 17.Separating the Handle.flv	8.9 MB
1.Pasta Scoop - 13.Sketching the Top View.flv	8.9 MB
1.Pasta Scoop - 3.Using Reference Images.flv	8.4 MB
2.Detergent Bottle - 7.Trimming the Surfaces.flv	8.0 MB
1.Pasta Scoop - 21.Adding Fillets.flv	7.8 MB
1.Pasta Scoop - 5.Splines.flv	7.4 MB
2.Detergent Bottle - 14.Making the Surface Model into a Solid.flv	7.3 MB
1.Pasta Scoop - 12.Tracing the Side View.flv	7.0 MB
1.Pasta Scoop - 24.Handle Top Surface.flv	6.9 MB
1.Pasta Scoop - 6.Control Points.flv	5.8 MB
3.Candle Holder - 3.Revolving the Base.flv	5.8 MB
1.Pasta Scoop - 1.Pasta Scoop.flv	5.6 MB
1.Pasta Scoop - 22.Handle Profile Shape.flv	5.2 MB
1.Pasta Scoop - 10.Widgets and Tools.flv	4.1 MB
1.Pasta Scoop - 14.Side View of the Parting Line.flv	4.0 MB
2.Detergent Bottle - 1.Detergent Bottle.flv	3.7 MB
3.Candle Holder - 2.Overview.flv	3.6 MB
3.Candle Holder - 1.Candle Holder.flv	3.5 MB
3.Candle Holder - 4.Planning the Handle.flv	3.3 MB
1.Pasta Scoop - 8.Control Polygon.flv	2.4 MB
2.Detergent Bottle - 2.Overview.flv	2.2 MB
1.Pasta Scoop - 20.Thickening the Bowl.flv	0.0 KB
/2011 SolidWorks Routing/
4.Electrical Routes - 7.Start and Add to Route.flv	41.9 MB
3.Piping Routes - 9.PID data and import.flv	28.2 MB
6.Creating Route Components - 6.The Component Wizard.flv	27.9 MB
4.Electrical Routes - 17.FromTo Lists and Guidelines.flv	27.2 MB
4.Electrical Routes - 2.Using Standard Cables.flv	24.7 MB
6.Creating Route Components - 9.Custom Elbows - Setup.flv	22.6 MB
4.Electrical Routes - 5.Defining Wires.flv	21.6 MB
6.Creating Route Components - 7.Custom PipeTube - Setup.flv	21.4 MB
6.Creating Route Components - 8.Custom PipeTube - Design Tables.flv	20.9 MB
6.Creating Route Components - 10.Custom Elbows - Design Tables.flv	20.6 MB
5.Electrical Conduits - 3.Electrical Conduit Data.flv	20.6 MB
4.Electrical Routes - 3.Creating Standard Cables.flv	20.0 MB
1.Routing Basics - 6.Start a Route at a Point.flv	19.1 MB
5.Electrical Conduits - 4.Flexible Electrical Conduit.flv	18.5 MB
4.Electrical Routes - 10.Routing through Clips.flv	18.3 MB
2.Tube Routes - 2.Basic Tube Route.flv	17.1 MB
4.Electrical Routes - 18.Component Reference Designators.flv	16.9 MB
4.Electrical Routes - 4.Creating Custom Cables.flv	16.8 MB
4.Electrical Routes - 16.CableWire Library.flv	16.1 MB
7.Drawings - 4.Electrical - Drawings.flv	16.0 MB
3.Piping Routes - 2.Basic Pipe Route.flv	15.8 MB
5.Electrical Conduits - 2.Creating a Conduit Route.flv	15.6 MB
3.Piping Routes - 4.Adding Fittings.flv	15.5 MB
4.Electrical Routes - 15.Component Library.flv	14.6 MB
4.Electrical Routes - 13.Virtual Clips.flv	13.6 MB
6.Creating Route Components - 2.Creating C-Points.flv	13.4 MB
3.Piping Routes - 3.Alternate Elbows.flv	12.7 MB
1.Routing Basics - 3.Routing Components.flv	12.2 MB
2.Tube Routes - 5.Editing Tube Routes.flv	11.7 MB
3.Piping Routes - 8.Pipe Coverings.flv	11.7 MB
1.Routing Basics - 8.Adding Components to Routes.flv	11.6 MB
2.Tube Routes - 3.Auto Route.flv	11.1 MB
1.Routing Basics - 2.Routing Overview.flv	10.9 MB
1.Routing Basics - 4.Start a Route by Drag and Drop.flv	10.6 MB
4.Electrical Routes - 9.Inserting Clips.flv	10.4 MB
3.Piping Routes - 10.Exporting Route Data.flv	10.0 MB
1.Routing Basics - 10.Routing Settings.flv	9.8 MB
7.Drawings - 6.Electrical - Tables.flv	9.8 MB
7.Drawings - 2.Tubing Drawings.flv	9.6 MB
1.Routing Basics - 1.Routing Introduction.flv	9.5 MB
7.Drawings - 10.Electrical Conduit.flv	9.3 MB
4.Electrical Routes - 11.Editing Route with Clips.flv	9.1 MB
1.Routing Basics - 7.Start a Route from Existing Components.flv	9.1 MB
1.Routing Basics - 5.End a Route by Drag and Drop.flv	8.9 MB
4.Electrical Routes - 6.Other Methods of Creating Routes.flv	8.9 MB
6.Creating Route Components - 5.Routing Library Manager.flv	7.6 MB
7.Drawings - 5.Electrical - Rerouting Drawings.flv	7.6 MB
6.Creating Route Components - 4.The Design Library.flv	6.3 MB
7.Drawings - 3.Piping Drawings.flv	6.2 MB
3.Piping Routes - 6.Pipe Penetration.flv	6.1 MB
5.Electrical Conduits - 1.Introduction to Conduits.flv	6.1 MB
6.Creating Route Components - 3.Creating R-Points.flv	6.1 MB
3.Piping Routes - 7.Pipe Reducers.flv	5.9 MB
1.Routing Basics - 9.C-Points.flv	5.9 MB
7.Drawings - 8.Coverings.flv	5.8 MB
4.Electrical Routes - 14.Create Route from Electrical Data.flv	5.6 MB
4.Electrical Routes - 8.Clips Overview.flv	5.4 MB
4.Electrical Routes - 1.Electrical Overview.flv	4.9 MB
3.Piping Routes - 5.Editing Pipe Routes.flv	4.6 MB
2.Tube Routes - 4.Repair Route.flv	4.6 MB
6.Creating Route Components - 1.Route Components.flv	4.5 MB
4.Electrical Routes - 12.Rotate Clips.flv	4.4 MB
2.Tube Routes - 6.Editing Tube Diameter.flv	4.3 MB
7.Drawings - 9.Miscellaneous Parts.flv	3.2 MB
7.Drawings - 1.Drawings Intro.flv	3.1 MB
3.Piping Routes - 1.Introduction to Piping.flv	1.9 MB
7.Drawings - 7.Additional BOM Information.flv	1.6 MB
2.Tube Routes - 1.Introduction to Tubing.flv	973.6 KB
/2011 Advanced Assemblies/
2.Assembly Features - 7.Smart Components.flv	37.6 MB
6.Assembly Configurations - 3.Advanced Options.flv	26.8 MB
1.Assembly Structure - 1.Creating Sub-Assemblies.flv	25.2 MB
6.Assembly Configurations - 4.Automatic Part Configurations.flv	23.5 MB
7.Top Down Assembly Design - 6.Inserting a New Component.flv	22.9 MB
5.Troubleshooting Mates - 4.Mate Xpert.flv	21.9 MB
2.Assembly Features - 8.Belts and Chains.flv	20.9 MB
3.Component Patterns - 1.Linear Patterns.flv	19.7 MB
6.Assembly Configurations - 5.Assembly Design Tables - Part A.flv	19.6 MB
6.Assembly Configurations - 6.Assembly Design Tables - Part B.flv	18.4 MB
6.Assembly Configurations - 7.SpeedPak.flv	18.4 MB
5.Troubleshooting Mates - 5.Replace Mate Entities.flv	18.0 MB
7.Top Down Assembly Design - 9.Removing External References - Part C.flv	17.4 MB
7.Top Down Assembly Design - 7.Removing External References - Part A.flv	17.3 MB
3.Component Patterns - 4.Mirroring Components.flv	17.0 MB
7.Top Down Assembly Design - 11.Virtual Components.flv	16.6 MB
4.Advanced Mate Types - 6.Gear Mate.flv	15.8 MB
7.Top Down Assembly Design - 4.In Context Features - Part A.flv	15.3 MB
3.Component Patterns - 3.Feature Driven Patterns.flv	15.3 MB
4.Advanced Mate Types - 13.Mate Reference Pairs.flv	15.3 MB
4.Advanced Mate Types - 9.Limit Mate.flv	14.9 MB
2.Assembly Features - 6.Hole Series.flv	14.5 MB
7.Top Down Assembly Design - 2.Edit Part Mode.flv	14.2 MB
6.Assembly Configurations - 2.Adding Configurations - Part B.flv	13.9 MB
2.Assembly Features - 2.Feature Scope.flv	13.2 MB
7.Top Down Assembly Design - 8.Removing External References - Part B.flv	12.9 MB
7.Top Down Assembly Design - 3.Component Visibility.flv	12.0 MB
4.Advanced Mate Types - 11.Mate References.flv	12.0 MB
4.Advanced Mate Types - 2.Width Mate.flv	12.0 MB
5.Troubleshooting Mates - 1.Assembly Mate Errors.flv	11.6 MB
5.Troubleshooting Mates - 2.Repairing Mate Errors - Part A.flv	11.3 MB
7.Top Down Assembly Design - 5.In Context Features - Part B.flv	11.0 MB
5.Troubleshooting Mates - 3.Repairing Mate Errors - Part B.flv	10.7 MB
4.Advanced Mate Types - 7.Rack and Pinion Mate.flv	10.6 MB
6.Assembly Configurations - 1.Adding Configurations - Part A.flv	10.4 MB
4.Advanced Mate Types - 5.Cam Mate.flv	10.1 MB
2.Assembly Features - 1.Assembly Feature.flv	10.0 MB
3.Component Patterns - 2.Circular Patterns.flv	9.9 MB
2.Assembly Features - 3.Assembly Fillets.flv	8.9 MB
1.Assembly Structure - 4.Folders vs. Sub-Assemblies.flv	8.8 MB
4.Advanced Mate Types - 3.Path Mate.flv	8.4 MB
2.Assembly Features - 4.Assembly Chamfers.flv	7.7 MB
4.Advanced Mate Types - 12.Extracting Mate References.flv	7.5 MB
4.Advanced Mate Types - 8.Screw Mate.flv	7.5 MB
7.Top Down Assembly Design - 10.No External References.flv	7.2 MB
2.Assembly Features - 5.Weld Beads.flv	7.0 MB
1.Assembly Structure - 2.Flexible Sub-Assemblies.flv	6.7 MB
4.Advanced Mate Types - 10.Hinge Mate.flv	6.4 MB
4.Advanced Mate Types - 4.Linear Coupler Mate.flv	6.4 MB
1.Assembly Structure - 3.Empty Sub-Assemblies.flv	6.4 MB
1.Assembly Structure - 5.Sub-Assemblies in Drawings.flv	6.3 MB
4.Advanced Mate Types - 1.Symmetric Mate.flv	5.9 MB
7.Top Down Assembly Design - 1.Top Down Design.flv	2.8 MB
/2011 SolidWorks Certification/
4.Configurations Part Modification - 5.Part Modification Exercise.flv	37.2 MB
3.Advanced Part Model - 13.Adding Fillets.flv	35.3 MB
6.CSWP Assembly Model - 18.Other Possible Assembly Question Types.flv	30.0 MB
6.CSWP Assembly Model - 14.Rotor In-context Relations 3.flv	27.8 MB
5.CSWA Assembly Model - 5.Mating the Remaining Components.flv	27.7 MB
2.Part Model with Equations - 2.The Central Cylinder.flv	27.4 MB
2.Part Model with Equations - 3.The Top Fork.flv	26.2 MB
6.CSWP Assembly Model - 2.Modeling the First Component.flv	25.9 MB
3.Advanced Part Model - 11.The Top Boss.flv	24.9 MB
3.Advanced Part Model - 6.The First Screw Lug.flv	24.4 MB
3.Advanced Part Model - 9.The Rib Structure.flv	23.8 MB
2.Part Model with Equations - 4.The Lower Fork.flv	23.1 MB
6.CSWP Assembly Model - 17.Simulate Motion.flv	23.0 MB
6.CSWP Assembly Model - 13.Rotor In-context Relations 2.flv	20.3 MB
5.CSWA Assembly Model - 2.Modeling the Parts.flv	19.1 MB
3.Advanced Part Model - 7.The Screw Lug Pattern.flv	16.3 MB
3.Advanced Part Model - 4.The Cylinder and Cone.flv	16.1 MB
5.CSWA Assembly Model - 6.Answering the Question.flv	15.8 MB
3.Advanced Part Model - 10.The Foot Pads.flv	15.3 MB
1.SolidWorks Certification - 9.Test Taking Strategy.flv	15.1 MB
2.Part Model with Equations - 6.Answering the Question.flv	14.0 MB
3.Advanced Part Model - 14.Answering the Question.flv	14.0 MB
4.Configurations Part Modification - 3.Adding and Modifying Configurations.flv	13.9 MB
6.CSWP Assembly Model - 11.Modeling the Rotor Component.flv	13.7 MB
3.Advanced Part Model - 2.Developing a Strategy.flv	13.4 MB
3.Advanced Part Model - 8.The Base Plate.flv	12.9 MB
1.SolidWorks Certification - 7.Purchasing and Setting up the Exam.flv	12.8 MB
3.Advanced Part Model - 3.Where to Begin.flv	12.7 MB
6.CSWP Assembly Model - 16.Further Testing of In-context Relations.flv	12.3 MB
5.CSWA Assembly Model - 3.Mating the First Part.flv	11.9 MB
3.Advanced Part Model - 12.The Tapped Holes.flv	11.8 MB
1.SolidWorks Certification - 4.What is the CSWP.flv	11.4 MB
6.CSWP Assembly Model - 10.Making a Change to the Assembly.flv	11.4 MB
1.SolidWorks Certification - 10.Modeling Question Preview.flv	11.1 MB
1.SolidWorks Certification - 3.What is the CSWA.flv	11.1 MB
6.CSWP Assembly Model - 9.Adding the Second Slider.flv	10.7 MB
1.SolidWorks Certification - 1.Why Get Certified.flv	10.6 MB
5.CSWA Assembly Model - 1.Problem Overview.flv	10.5 MB
2.Part Model with Equations - 5.Adding Fillets.flv	10.4 MB
5.CSWA Assembly Model - 4.Using SmartMates.flv	10.1 MB
3.Advanced Part Model - 5.The Rectangular Flange.flv	9.6 MB
2.Part Model with Equations - 7.Updating the Geometry.flv	9.5 MB
6.CSWP Assembly Model - 8.Slider In-context Relations.flv	9.4 MB
6.CSWP Assembly Model - 15.Testing In-context Relations.flv	9.2 MB
6.CSWP Assembly Model - 7.Mating the First Slider.flv	9.1 MB
6.CSWP Assembly Model - 3.Starting the Assembly.flv	8.7 MB
3.Advanced Part Model - 1.Problem Overview.flv	8.7 MB
2.Part Model with Equations - 1.Where to Begin.flv	7.6 MB
1.SolidWorks Certification - 6.SolidWorks Versions.flv	7.1 MB
4.Configurations Part Modification - 4.Part Modification Question.flv	6.1 MB
6.CSWP Assembly Model - 12.Rotor In-context Relation 1.flv	6.1 MB
4.Configurations Part Modification - 2.Configurations Question.flv	5.5 MB
1.SolidWorks Certification - 2.Preparing for the Exam.flv	5.5 MB
6.CSWP Assembly Model - 4.Making Changes to the Model.flv	4.7 MB
7.CSWA Multiple Choice Questions - 1.Multiple Choice Section Overview.flv	4.1 MB
6.CSWP Assembly Model - 1.Problem Overview.flv	3.9 MB
6.CSWP Assembly Model - 19.Final Comments.flv	3.3 MB
7.CSWA Multiple Choice Questions - 10.Relative to Model.flv	3.2 MB
7.CSWA Multiple Choice Questions - 6.Partial Section.flv	3.0 MB
7.CSWA Multiple Choice Questions - 16.Predefined View.flv	3.0 MB
4.Configurations Part Modification - 1.Configurations Intro.flv	3.0 MB
7.CSWA Multiple Choice Questions - 7.Aligned Section.flv	2.8 MB
7.CSWA Multiple Choice Questions - 2.Model View.flv	2.7 MB
7.CSWA Multiple Choice Questions - 5.Section View.flv	2.7 MB
7.CSWA Multiple Choice Questions - 3.Projected View.flv	2.5 MB
1.SolidWorks Certification - 5.Other Certifications.flv	2.5 MB
7.CSWA Multiple Choice Questions - 15.Empty View.flv	2.0 MB
7.CSWA Multiple Choice Questions - 14.Alternate Position View.flv	1.9 MB
7.CSWA Multiple Choice Questions - 8.Broken Out Section.flv	1.7 MB
1.SolidWorks Certification - 8.When You Pass the Exam.flv	1.7 MB
8.Conclusion - 1.Goodbye.flv	1.6 MB
7.CSWA Multiple Choice Questions - 4.Auxiliary View.flv	1.4 MB
7.CSWA Multiple Choice Questions - 13.Cropped View.flv	1.3 MB
7.CSWA Multiple Choice Questions - 9.Detail View.flv	1.2 MB
7.CSWA Multiple Choice Questions - 12.Break View.flv	980.5 KB
7.CSWA Multiple Choice Questions - 11.Standard 3 View.flv	977.2 KB
6.CSWP Assembly Model - 5.In-context Considerations.flv	0.0 KB
6.CSWP Assembly Model - 6.Modeling the Slider.flv	0.0 KB
/2011 Advanced Parts/
3.Sweeps - 9.Threads.flv	35.7 MB
5.Flex Feature - 2.Flex Feature.flv	31.4 MB
1.Advanced Sketching - 07.3D Sketching.flv	23.0 MB
1.Advanced Sketching - 08.3D Sketching with Planes.flv	22.3 MB
2.Advanced Fillets - 2.Variable Radius Fillets.flv	21.7 MB
3.Sweeps - 6.Profile Orientation.flv	21.5 MB
6.Multibody Parts - 8.Additional Techniques.flv	19.6 MB
6.Multibody Parts - 4.Splitting Bodies - Part B.flv	19.5 MB
6.Multibody Parts - 6.Combining Multiple Bodies.flv	18.4 MB
4.Lofts - 02.The Basic Loft.flv	17.9 MB
4.Lofts - 05.Start-End Constraints.flv	17.1 MB
4.Lofts - 07.Profile Geometry.flv	16.6 MB
7.Indent Feature - 1.Indent Feature.flv	16.2 MB
1.Advanced Sketching - 11.Curve Through XYZ Points.flv	16.1 MB
2.Advanced Fillets - 7.Fillet Xpert.flv	15.6 MB
2.Advanced Fillets - 1.Fillet Options.flv	15.5 MB
5.Flex Feature - 3.Bending.flv	15.2 MB
3.Sweeps - 2.The Basic Sweep.flv	15.2 MB
1.Advanced Sketching - 09.3D Sketch Planes.flv	15.2 MB
6.Multibody Parts - 9.Positioning Bodies.flv	14.2 MB
6.Multibody Parts - 5.Multibody Design Techniques.flv	14.1 MB
3.Sweeps - 4.Guide Curves.flv	13.4 MB
4.Lofts - 06.Guide Curves.flv	11.4 MB
3.Sweeps - 7.Twist.flv	11.1 MB
1.Advanced Sketching - 06.3D Sketching - Intro.flv	10.8 MB
2.Advanced Fillets - 8.Corner Xpert.flv	10.7 MB
4.Lofts - 04.Loft Profiles.flv	10.7 MB
3.Sweeps - 3.Path Options.flv	10.6 MB
5.Flex Feature - 5.Tapering and Stretching.flv	10.3 MB
3.Sweeps - 5.Multiple Guide Curves.flv	10.2 MB
6.Multibody Parts - 1.Introduction.flv	10.0 MB
4.Lofts - 09.Adding Loft Sections.flv	9.9 MB
7.Indent Feature - 2.Using Multiple Tool Bodies.flv	9.9 MB
3.Sweeps - 8.Cutting with Sweeps.flv	9.8 MB
6.Multibody Parts - 3.Splitting Bodies - Part A.flv	9.7 MB
6.Multibody Parts - 7.Swept Cuts with Bodies.flv	9.5 MB
1.Advanced Sketching - 15.Intersection Curve.flv	9.1 MB
7.Indent Feature - 3.Multiple Tool Regions.flv	7.9 MB
4.Lofts - 08.Centerline.flv	7.8 MB
6.Multibody Parts - 2.Creating Multiple Bodies.flv	7.8 MB
1.Advanced Sketching - 16.Derived Sketches.flv	7.6 MB
1.Advanced Sketching - 14.Projected Curve.flv	6.5 MB
1.Advanced Sketching - 04.Parabola.flv	6.5 MB
1.Advanced Sketching - 10.Helixes & Spirals.flv	6.4 MB
1.Advanced Sketching - 03.Partial Ellipse.flv	6.4 MB
1.Advanced Sketching - 02.Ellipse.flv	6.2 MB
1.Advanced Sketching - 12.Composite Curve.flv	5.8 MB
7.Indent Feature - 4.Surfaces and the Cut Option.flv	5.6 MB
4.Lofts - 10.Cutting with a Loft.flv	5.4 MB
4.Lofts - 01.Introduction.flv	5.3 MB
5.Flex Feature - 4.Twisting.flv	5.3 MB
2.Advanced Fillets - 3.Face Fillets.flv	4.8 MB
2.Advanced Fillets - 5.Curvature Continuous Fillets.flv	4.7 MB
2.Advanced Fillets - 4.Hold Line Fillets.flv	4.2 MB
2.Advanced Fillets - 6.Full Round Fillets.flv	4.2 MB
1.Advanced Sketching - 05.Splitting Entities.flv	4.1 MB
1.Advanced Sketching - 01.Polygon.flv	4.0 MB
3.Sweeps - 1.Introduction.flv	3.8 MB
1.Advanced Sketching - 17.Sketch Xpert.flv	3.8 MB
4.Lofts - 03.Closing a Loft.flv	3.4 MB
1.Advanced Sketching - 13.Curve Through Reference Points.flv	3.2 MB
5.Flex Feature - 1.Introduction.flv	1.4 MB
/Case Studies/Advanced Parts/
1.Light Bulb - 7.Base Threads.flv	35.6 MB
1.Light Bulb - 4.Fluorescent Tube.flv	33.8 MB
1.Light Bulb - 3.Bulb Base.flv	18.9 MB
1.Light Bulb - 6.Completing the Tube.flv	14.4 MB
1.Light Bulb - 5.Connecting the Tube.flv	11.8 MB
1.Light Bulb - 1.Light Bulb.flv	4.0 MB
1.Light Bulb - 2.Overview.flv	1.6 MB
/2011 AutoCAD to SolidWorks/
1.AutoCAD to SolidWorks Tools - 12.Blocks and Mechanisms.flv	32.6 MB
2.SolidWorks Parts - 7.Extruded Boss.flv	22.3 MB
2.SolidWorks Parts - 4.Circles And Arcs.flv	20.4 MB
4.SolidWorks Drawings - 2.Model View.flv	20.0 MB
3.SolidWorks Assemblies - 4.Adding Mates.flv	19.9 MB
1.AutoCAD to SolidWorks Tools - 10.3D Features.flv	19.1 MB
1.AutoCAD to SolidWorks Tools - 2.What is SolidWorks.flv	18.0 MB
4.SolidWorks Drawings - 1.Introducing Drawings.flv	17.4 MB
2.SolidWorks Parts - 6.Dimensions.flv	16.5 MB
4.SolidWorks Drawings - 6.Bill of Materials.flv	16.0 MB
2.SolidWorks Parts - 2.Lines.flv	15.9 MB
1.AutoCAD to SolidWorks Tools - 8.Import to Part - Each Layer as Sketch.flv	15.8 MB
2.SolidWorks Parts - 5.Geometric Relations.flv	14.9 MB
1.AutoCAD to SolidWorks Tools - 5.Import to Drawing.flv	14.1 MB
4.SolidWorks Drawings - 3.Section View.flv	12.9 MB
4.SolidWorks Drawings - 7.Balloons.flv	12.6 MB
2.SolidWorks Parts - 1.The Sketcher.flv	11.5 MB
3.SolidWorks Assemblies - 3.Inserting Components.flv	11.0 MB
2.SolidWorks Parts - 11.Shell.flv	10.4 MB
3.SolidWorks Assemblies - 2.Starting an Assembly.flv	10.4 MB
2.SolidWorks Parts - 9.Convert Entities.flv	10.3 MB
3.SolidWorks Assemblies - 5.Collision Detection.flv	10.3 MB
2.SolidWorks Parts - 8.Revolved Boss.flv	10.2 MB
1.AutoCAD to SolidWorks Tools - 6.Embedded AutoCAD Drawing.flv	10.2 MB
1.AutoCAD to SolidWorks Tools - 9.Orienting and Aligning Sketches.flv	10.0 MB
2.SolidWorks Parts - 3.Rectangles.flv	9.8 MB
4.SolidWorks Drawings - 5.Dimensions.flv	9.2 MB
4.SolidWorks Drawings - 4.Detail View.flv	8.1 MB
2.SolidWorks Parts - 10.Sketches on Faces.flv	7.1 MB
1.AutoCAD to SolidWorks Tools - 7.Import to Part.flv	6.6 MB
1.AutoCAD to SolidWorks Tools - 3.Import Options.flv	5.7 MB
1.AutoCAD to SolidWorks Tools - 4.DraftSight.flv	4.3 MB
1.AutoCAD to SolidWorks Tools - 11.Import to Part - 3D.flv	3.8 MB
1.AutoCAD to SolidWorks Tools - 1.Introduction - Value of 2D Data.flv	3.7 MB
3.SolidWorks Assemblies - 1.Introducing Assemblies.flv	1.5 MB
/2011 Update Training/
08.Weldments - 2.Weld Beads.flv	31.7 MB
01.General Enhancements - 5.Photoview 360.flv	27.5 MB
03.Assemblies - 5.Assembly Defeature.flv	22.4 MB
01.General Enhancements - 3.Display Manager- Decals.flv	22.0 MB
01.General Enhancements - 2.Display Manager- Appearances.flv	18.9 MB
01.General Enhancements - 4.Display Manager-Scenes.flv	16.4 MB
03.Assemblies - 4.Assembly Visualization.flv	16.0 MB
07.Sheet Metal - 5.DXF and DWG Mapping.flv	15.9 MB
10.Weldments - 2.Interface Changes.flv	15.7 MB
10.Weldments - 1.General Enhancements.flv	15.7 MB
10.Weldments - 3.2D Simplification.flv	15.7 MB
03.Assemblies - 9.Walkthroughs.flv	15.2 MB
08.Weldments - 3.Grid System.flv	14.6 MB
10.Weldments - 5.Beams.flv	14.6 MB
02.Parts & Features - 2.Equation Sharing.flv	14.1 MB
04.Configurations - 4.Configurations- Cosmetic Threads.flv	13.9 MB
04.Configurations - 3.Configurations- Global Variables.flv	13.8 MB
04.Configurations - 2.Configurations- Scale.flv	13.5 MB
01.General Enhancements - 6.DFMXpress.flv	12.6 MB
07.Sheet Metal - 6.Sheet Metal Properties.flv	12.5 MB
01.General Enhancements - 7.DXF and DWG Import Wizard.flv	12.3 MB
07.Sheet Metal - 2.Convert to Sheet Metal.flv	12.2 MB
02.Parts & Features - 7.Symmetry Check.flv	12.1 MB
02.Parts & Features - 3.Equation Suppression.flv	11.8 MB
02.Parts & Features - 1.Defeature-Part.flv	11.5 MB
04.Configurations - 6.Configuration Publisher.flv	11.1 MB
06.Surfacing - 1.Surface Extrudes.flv	11.0 MB
03.Assemblies - 7.Replace Mate Entities.flv	10.5 MB
08.Weldments - 4.Welds in Drawings.flv	10.4 MB
10.Weldments - 4.Shells.flv	10.0 MB
09.Routing - 1.Routing Library Manager.flv	9.7 MB
09.Routing - 3.Weld Gaps.flv	9.5 MB
05.Drawings and Detailing - 9.Hole Table.flv	9.4 MB
05.Drawings and Detailing - 2.Dimension Palette - Alignment.flv	9.3 MB
04.Configurations - 5.Configurations- K factor.flv	9.2 MB
09.Routing - 5.Moving and Rotating a Fitting.flv	8.9 MB
03.Assemblies - 1.Assembly Fillets.flv	8.9 MB
05.Drawings and Detailing - 6.Sheet Metal Drawings.flv	8.7 MB
06.Surfacing - 2.Parting Surfaces.flv	8.6 MB
02.Parts & Features - 5.Revolve.flv	8.4 MB
01.General Enhancements - 1.Converting Files to 2011.flv	8.2 MB
08.Weldments - 1.Cut Lists.flv	8.1 MB
07.Sheet Metal - 1.Bend Calculation Tables.flv	8.0 MB
03.Assemblies - 2.Assembly Chamfers.flv	7.9 MB
03.Assemblies - 8.SpeedPak.flv	7.9 MB
03.Assemblies - 3.Assembly Weld Beads.flv	7.9 MB
09.Routing - 2.Route Along Existing Geometry.flv	7.4 MB
05.Drawings and Detailing - 1.Dimension Palette - Auto Arrange.flv	7.1 MB
03.Assemblies - 6.Interference Detection.flv	6.4 MB
04.Configurations - 1.Configurations Enhancements.flv	6.4 MB
07.Sheet Metal - 3.Pattern and Mirror Flanges.flv	5.7 MB
01.General Enhancements - 8..IFC Files.flv	5.6 MB
02.Parts & Features - 4.Helix- Variable Pitch.flv	5.6 MB
02.Parts & Features - 6.Scale.flv	5.3 MB
05.Drawings and Detailing - 8.Model Color.flv	5.2 MB
05.Drawings and Detailing - 3.Display Scale.flv	4.8 MB
05.Drawings and Detailing - 7.Hide Bodies.flv	4.6 MB
05.Drawings and Detailing - 5.Center Marks.flv	4.2 MB
07.Sheet Metal - 4.Recreate Flat Pattern.flv	3.4 MB
05.Drawings and Detailing - 4.Show Dimension Units.flv	3.4 MB
09.Routing - 6.Isolate.flv	2.8 MB
09.Routing - 4.Autosize.flv	2.8 MB
/2011 Sheet Metal/
1.2011 Sheet Metal - 33.Multibody Sheet Metal Parts.flv	29.3 MB
1.2011 Sheet Metal - 25.Convert to Sheet Metal.flv	22.8 MB
1.2011 Sheet Metal - 11.Miter Flange.flv	21.1 MB
1.2011 Sheet Metal - 24.Creating New Forming Tools.flv	20.5 MB
1.2011 Sheet Metal - 23.Modifying Forming Tools.flv	18.4 MB
1.2011 Sheet Metal - 2.Base Flange - Part A.flv	16.8 MB
1.2011 Sheet Metal - 9.Edge Flange - Part B.flv	14.9 MB
1.2011 Sheet Metal - 8.Edge Flange - Part A.flv	14.2 MB
1.2011 Sheet Metal - 26.Rip Feature.flv	13.6 MB
1.2011 Sheet Metal - 30.Sheet Metal Drawings.flv	12.7 MB
1.2011 Sheet Metal - 5.Bend Tables.flv	12.5 MB
1.2011 Sheet Metal - 27.Insert Bends.flv	12.3 MB
1.2011 Sheet Metal - 6.Flat Pattern Options.flv	12.0 MB
1.2011 Sheet Metal - 15.Closed Corner.flv	11.9 MB
1.2011 Sheet Metal - 18.Jog.flv	11.9 MB
1.2011 Sheet Metal - 28.Cones and Cylinders.flv	11.7 MB
1.2011 Sheet Metal - 7.Corner Trim.flv	11.7 MB
1.2011 Sheet Metal - 31.Cross Breaks.flv	11.3 MB
1.2011 Sheet Metal - 22.Forming Tools vs Derived Parts.flv	11.3 MB
1.2011 Sheet Metal - 3.Base Flange - Part B.flv	10.7 MB
1.2011 Sheet Metal - 14.Cuts Across Bends.flv	10.7 MB
1.2011 Sheet Metal - 13.Sheet Metal Cuts.flv	9.4 MB
1.2011 Sheet Metal - 17.Sketched Bend.flv	9.3 MB
1.2011 Sheet Metal - 21.Forming Tools.flv	8.6 MB
1.2011 Sheet Metal - 19.Hem.flv	8.3 MB
1.2011 Sheet Metal - 29.Lofted Bends.flv	8.2 MB
1.2011 Sheet Metal - 4.Bend Allowance.flv	7.2 MB
1.2011 Sheet Metal - 10.Edge Flange - Part C.flv	6.4 MB
1.2011 Sheet Metal - 20.Design Library Cuts.flv	6.1 MB
1.2011 Sheet Metal - 32.Export to DXF or DWG.flv	6.1 MB
1.2011 Sheet Metal - 12.Tab.flv	4.1 MB
1.2011 Sheet Metal - 16.Break Corner.flv	4.1 MB
1.2011 Sheet Metal - 1.Introduction.flv	3.8 MB
/2011 Weldments/
1.Weldments - 8.Weld Beads.flv	27.3 MB
1.Weldments - 2.Structural Members.flv	20.6 MB
1.Weldments - 7.Gussets And End Caps.flv	19.0 MB
1.Weldments - 12.Creating Sub-Weldments.flv	18.5 MB
1.Weldments - 9.Cut Lists - Part A.flv	18.4 MB
1.Weldments - 3.Layout Sketches.flv	15.2 MB
1.Weldments - 5.Trim Extend - Part B.flv	13.6 MB
1.Weldments - 4.Trim Extend - Part A.flv	13.1 MB
1.Weldments - 6.Plates And Fillet Beads.flv	12.9 MB
1.Weldments - 13.Creating Custom Profiles.flv	11.7 MB
1.Weldments - 10.Cut Lists - Part B.flv	10.7 MB
1.Weldments - 11.Weld Table.flv	8.3 MB
1.Weldments - 1.Introduction.flv	3.7 MB
/2011 DriveWorksXpress/
1.DriveWorksXpress - 5.Creating Rules - Dimensions.flv	27.3 MB
1.DriveWorksXpress - 6.Creating Rules - Features And Properties.flv	24.3 MB
1.DriveWorksXpress - 4.Creating the Input Form.flv	20.9 MB
1.DriveWorksXpress - 3.Capturing SolidWorks Data.flv	20.4 MB
1.DriveWorksXpress - 7.Creating New Variants.flv	12.6 MB
1.DriveWorksXpress - 2.Starting DriveWorksXpress.flv	11.2 MB
1.DriveWorksXpress - 1.Introduction.flv	9.3 MB
/2011 Mold Tools/
2.Mold Tools - Core and Cavity - 1.Draft Analysis - Part A.flv	26.8 MB
2.Mold Tools - Core and Cavity - 8.Side Cores - Part A.flv	21.8 MB
2.Mold Tools - Core and Cavity - 9.Side Cores - Part B.flv	19.4 MB
2.Mold Tools - Core and Cavity - 7.Creating the Mold.flv	19.1 MB
3.Fastening Features - 5.Lip and Groove.flv	16.1 MB
3.Fastening Features - 1.Mounting Boss.flv	13.4 MB
3.Fastening Features - 4.Vent Feature.flv	11.7 MB
3.Fastening Features - 3.Snap Groove.flv	11.6 MB
2.Mold Tools - Core and Cavity - 5.Shut-Off Surfaces.flv	9.1 MB
2.Mold Tools - Core and Cavity - 3.Scale.flv	8.5 MB
2.Mold Tools - Core and Cavity - 4.Parting Lines.flv	7.9 MB
3.Fastening Features - 2.Snap Hook.flv	7.3 MB
2.Mold Tools - Core and Cavity - 6.Parting Surface.flv	5.8 MB
2.Mold Tools - Core and Cavity - 2.Draft Analysis - Part B.flv	4.9 MB
1.Introduction - 1.Introduction.flv	2.7 MB
/2011 TolAnalyst/
2.DimXpert - 11.DimXpert Exercise - Part I.flv	26.3 MB
2.DimXpert - 2.Auto Dimension Scheme.flv	23.1 MB
3.TolAnalyst - 7.TolAnalyst Exercise.flv	21.3 MB
2.DimXpert - 12.DimXpert Exercise - Part II.flv	19.8 MB
2.DimXpert - 10.Pattern Feature.flv	13.8 MB
3.TolAnalyst - 5.Analyzing the Results.flv	13.5 MB
2.DimXpert - 7.Tolerance Status.flv	12.9 MB
3.TolAnalyst - 4.Assembly Constraints.flv	11.1 MB
1.Course Introduction - 1.Introduction.flv	9.9 MB
2.DimXpert - 8.DimXpert Options.flv	9.5 MB
3.TolAnalyst - 6.FixedFloating Fasteners.flv	9.2 MB
2.DimXpert - 3.Datums.flv	8.9 MB
3.TolAnalyst - 2.Establishing the Measurement.flv	8.6 MB
2.DimXpert - 5.Location Dimensions.flv	8.4 MB
2.DimXpert - 6.Geometric Tolerances.flv	8.2 MB
2.DimXpert - 4.Size Dimensions.flv	8.1 MB
2.DimXpert - 1.DimXpert Overview.flv	7.4 MB
2.DimXpert - 9.Using DimXpert Information in Drawings.flv	7.3 MB
3.TolAnalyst - 1.TolAnalyst Overview.flv	4.8 MB
3.TolAnalyst - 3.Assembly Sequence.flv	4.6 MB
/2011 Core Concepts/
5.Parts - 07.Appearances.flv	25.9 MB
3.Sketched Features - 2.Extruded Boss.flv	22.3 MB
5.Parts - 04.Design Intent.flv	21.0 MB
2.The Sketcher - 04.Circles & Arcs.flv	20.4 MB
6.Assemblies - 05.Adding Mates.flv	19.9 MB
4.Applied Features - 02.Fillets.flv	19.2 MB
6.Assemblies - 17.Exploding Assemblies.flv	18.3 MB
5.Parts - 06.Symmetry B.flv	17.6 MB
3.Sketched Features - 8.Loft.flv	17.1 MB
5.Parts - 15.Configurations - Table.flv	16.8 MB
5.Parts - 08.Editing Parts.flv	16.6 MB
2.The Sketcher - 07.Dimensions.flv	16.5 MB
2.The Sketcher - 05.Automatic Relations.flv	16.3 MB
2.The Sketcher - 09.Over Defined Sketches.flv	16.2 MB
2.The Sketcher - 02.Lines.flv	15.9 MB
5.Parts - 19.Design Tables for Features.flv	15.8 MB
6.Assemblies - 14.Interference Detection.flv	15.2 MB
5.Parts - 05.Symmetry A.flv	15.0 MB
2.The Sketcher - 06.Geometric Relations.flv	14.9 MB
3.Sketched Features - 7.Sweep.flv	14.9 MB
3.Sketched Features - 9.Ribs.flv	14.9 MB
1.Introduction - 2.SolidWorks Overview.flv	14.7 MB
4.Applied Features - 14.Hole Wizard.flv	14.1 MB
6.Assemblies - 04.Positioning Parts.flv	14.0 MB
5.Parts - 13.Configurations - Dimension Changes.flv	13.6 MB
1.Introduction - 5.View Manipulation.flv	12.8 MB
4.Applied Features - 03.Chamfers.flv	12.5 MB
4.Applied Features - 10.Curve Driven Patterns.flv	12.4 MB
6.Assemblies - 18.Introduction to Top Down Design.flv	12.4 MB
1.Introduction - 3.SolidWorks Interface.flv	12.1 MB
5.Parts - 14.Configurations - Feature Suppression.flv	11.6 MB
2.The Sketcher - 10.Sketch Fillets.flv	11.6 MB
2.The Sketcher - 01.The Sketcher.flv	11.5 MB
4.Applied Features - 13.Planes II.flv	11.4 MB
6.Assemblies - 06.Coincident Mate.flv	11.3 MB
6.Assemblies - 20.Assembly BOM.flv	11.1 MB
5.Parts - 09.Instant 3D.flv	11.1 MB
6.Assemblies - 03.Inserting Components.flv	11.0 MB
5.Parts - 18.Design Tables - Creating.flv	11.0 MB
4.Applied Features - 11.Fill Patterns.flv	10.9 MB
6.Assemblies - 10.Smart Mates.flv	10.7 MB
5.Parts - 12.Configurations - Intro.flv	10.6 MB
6.Assemblies - 12.Assembly Appearances.flv	10.6 MB
4.Applied Features - 04.Shell.flv	10.4 MB
6.Assemblies - 02.Starting an Assembly.flv	10.4 MB
2.The Sketcher - 14.Convert Entities.flv	10.3 MB
6.Assemblies - 16.Collision Detection.flv	10.3 MB
3.Sketched Features - 5.Revolved Boss.flv	10.2 MB
6.Assemblies - 11.Multiple Mate Mode.flv	10.1 MB
2.The Sketcher - 03.Rectangles.flv	9.8 MB
1.Introduction - 4.Task Pane Resources.flv	9.6 MB
5.Parts - 17.Design Tables - Renaming Dimensions.flv	9.5 MB
6.Assemblies - 13.Assembly Appearances - II.flv	9.1 MB
5.Parts - 02.Starting a Part.flv	8.9 MB
5.Parts - 11.Parent Child Relations.flv	8.9 MB
4.Applied Features - 08.Linear Patterns.flv	8.9 MB
6.Assemblies - 19.Intro to Top Down Design - II.flv	8.6 MB
2.The Sketcher - 08.Fully Defined Sketches.flv	8.5 MB
4.Applied Features - 05.3D Mirroring.flv	8.1 MB
4.Applied Features - 06.Planes I.flv	7.6 MB
2.The Sketcher - 13.Trim Tools.flv	7.3 MB
2.The Sketcher - 15.Sketches on Faces.flv	7.1 MB
5.Parts - 03.Picking a Plane.flv	6.3 MB
6.Assemblies - 15.Dynamic Clearance.flv	6.2 MB
4.Applied Features - 09.Circular Patterns.flv	5.4 MB
3.Sketched Features - 4.Extruded Cut.flv	5.4 MB
5.Parts - 10.Feature Suppression.flv	5.0 MB
3.Sketched Features - 3.Contours & Thin Features.flv	4.9 MB
4.Applied Features - 12.Creating Axes.flv	4.6 MB
5.Parts - 16.Design Tables - Intro.flv	4.5 MB
6.Assemblies - 09.Tangent Mate.flv	4.5 MB
2.The Sketcher - 12.Offset Entities.flv	3.9 MB
2.The Sketcher - 11.Sketch Mirroring.flv	3.7 MB
6.Assemblies - 07.Distance Mate.flv	3.5 MB
5.Parts - 01.Introducing Parts.flv	3.3 MB
4.Applied Features - 07.Mirroring Bodies.flv	2.8 MB
6.Assemblies - 08.Concentric Mate.flv	2.7 MB
1.Introduction - 1.Course Introduction.flv	2.0 MB
3.Sketched Features - 6.Revolved Cut.flv	1.8 MB
6.Assemblies - 01.Introducing Assemblies.flv	1.5 MB
3.Sketched Features - 1.Sketched Features Introduction.flv	1.1 MB
4.Applied Features - 01.Applied Features Overview.flv	388.0 KB
/2011 Intro to eDrawings/
1.2011 Intro to eDrawings - 1.eDrawings Overview.flv	25.4 MB
1.2011 Intro to eDrawings - 4.Professional and Premium Options.flv	20.6 MB
1.2011 Intro to eDrawings - 3.Additional Options and Saving as HTML.flv	19.7 MB
1.2011 Intro to eDrawings - 2.Embedding and Sharing eDrawings files.flv	15.4 MB
/2011 File Management/
1.File Management - 2.References.flv	24.5 MB
1.File Management - 6.Document Revisions - Part B.flv	23.2 MB
1.File Management - 1.File Relationships.flv	21.9 MB
1.File Management - 3.Renaming Parts - Save As.flv	20.4 MB
1.File Management - 4.Renaming Parts - SolidWorks Explorer.flv	13.6 MB
1.File Management - 7.Reloading and Replacing.flv	12.5 MB
1.File Management - 5.Document Revisions - Part A.flv	6.9 MB
/2011 Drawings/
2011 Drawings - 21.BOMs - Advanced Options.flv	24.2 MB
2011 Drawings - 02.Model View.flv	20.0 MB
2011 Drawings - 01.Introducing Drawings.flv	17.4 MB
2011 Drawings - 19.Note Annotations.flv	16.0 MB
2011 Drawings - 20.Bill of Materials.flv	15.8 MB
2011 Drawings - 25.Custom Sheet Formats.flv	15.7 MB
2011 Drawings - 14.Driving Dimensions.flv	15.2 MB
2011 Drawings - 24.Custom Templates.flv	14.4 MB
2011 Drawings - 15.Driven Dimensions.flv	13.3 MB
2011 Drawings - 05.Section View.flv	12.9 MB
2011 Drawings - 23.Balloons.flv	12.6 MB
2011 Drawings - 22.Linking BOMs.flv	11.2 MB
2011 Drawings - 13.Dimensions.flv	9.2 MB
2011 Drawings - 07.Detail View.flv	8.1 MB
2011 Drawings - 18.Center Marks.flv	8.0 MB
2011 Drawings - 12.Scale.flv	7.2 MB
2011 Drawings - 06.Assembly Section View.flv	6.8 MB
2011 Drawings - 09.Exploded View.flv	5.1 MB
2011 Drawings - 08.Broken View.flv	4.7 MB
2011 Drawings - 16.Ordinate Dimensions.flv	4.6 MB
2011 Drawings - 10.Display Options.flv	4.2 MB
2011 Drawings - 17.Baseline Dimensions.flv	4.1 MB
2011 Drawings - 04.Auxiliary View.flv	3.9 MB
2011 Drawings - 11.View Alignment.flv	3.7 MB
2011 Drawings - 03.Projected View.flv	2.7 MB
/.../Parts And Assemblies/
2.Basic Part Exercises - 2.Mounting Block - Part 2.flv	23.0 MB
3.Basic Assembly Exercises - 1.Tape Case Assembly.flv	21.5 MB
2.Basic Part Exercises - 6.Bracket - Part 3.flv	20.6 MB
2.Basic Part Exercises - 3.Mounting Block - Part 3.flv	19.8 MB
3.Basic Assembly Exercises - 2.Brace Assembly - Part 1.flv	17.3 MB
2.Basic Part Exercises - 10.Curved Housing - Part 3.flv	17.1 MB
2.Basic Part Exercises - 4.Bracket - Part 1.flv	17.0 MB
3.Basic Assembly Exercises - 3.Brace Assembly - Part 2.flv	15.5 MB
2.Basic Part Exercises - 9.Curved Housing - Part 2.flv	15.3 MB
2.Basic Part Exercises - 5.Bracket - Part 2.flv	13.7 MB
2.Basic Part Exercises - 7.Bracket - Part 4.flv	9.1 MB
2.Basic Part Exercises - 1.Mounting Block - Part 1.flv	7.1 MB
2.Basic Part Exercises - 11.Curved Housing - Part 4.flv	7.1 MB
2.Basic Part Exercises - 8.Curved Housing - Part 1.flv	6.6 MB
1.Introduction - 1.Exercises Introduction.flv	3.3 MB
/2011 3D Skills/
1.Parts - 10.Extruded Boss.flv	22.3 MB
1.Parts - 05.Circles & Arcs.flv	20.4 MB
3.Drawings - 2.Model View.flv	20.0 MB
2.Assemblies - 4.Adding Mates.flv	19.9 MB
3.Drawings - 1.Introducing Drawings.flv	17.4 MB
1.Parts - 07.Dimensions.flv	16.5 MB
3.Drawings - 6.Bill of Materials.flv	16.0 MB
1.Parts - 03.Lines.flv	15.9 MB
1.Parts - 06.Geometric Relations.flv	14.9 MB
3.Drawings - 3.Section View.flv	12.9 MB
3.Drawings - 7.Balloons.flv	12.6 MB
1.Parts - 02.The Sketcher.flv	11.5 MB
2.Assemblies - 3.Inserting Components.flv	11.0 MB
1.Parts - 12.Shell.flv	10.4 MB
2.Assemblies - 2.Starting an Assembly.flv	10.4 MB
1.Parts - 09.Convert Entities.flv	10.3 MB
2.Assemblies - 5.Collision Detection.flv	10.3 MB
1.Parts - 11.Revolved Boss.flv	10.2 MB
1.Parts - 04.Rectangles.flv	9.8 MB
3.Drawings - 5.Dimensions.flv	9.2 MB
3.Drawings - 4.Detail View.flv	8.1 MB
1.Parts - 08.Sketches on Faces.flv	7.1 MB
1.Parts - 01.Course Introduction.flv	5.0 MB
2.Assemblies - 1.Introducing Assemblies.flv	1.5 MB
/2011 SolidWorks Workgroup PDM/
3.Managing Assemblies - 7.As Built vs. Latest.flv	21.1 MB
2.Managing Parts - 8.Making Revisions.flv	19.8 MB
3.Managing Assemblies - 3.Checking In a New Assembly.flv	19.4 MB
2.Managing Parts - 3.Checking In a New Part - II.flv	19.0 MB
3.Managing Assemblies - 9.Toolbox - Without Revision Control.flv	17.5 MB
3.Managing Assemblies - 11.Collaborative Environments.flv	16.2 MB
5.Managing Other Filetypes - 1.SolidWorks Explorer.flv	15.5 MB
4.Managing Drawings - 4.Assembly Drawing Changes.flv	15.1 MB
5.Managing Other Filetypes - 4.Adding Attachments.flv	12.5 MB
2.Managing Parts - 10.Document Information.flv	12.3 MB
1.PDM Overview - 1.SolidWorks PDM Intro.flv	11.7 MB
2.Managing Parts - 4.Check In Tips.flv	11.7 MB
3.Managing Assemblies - 10.Toolbox - With Revision Control.flv	11.3 MB
2.Managing Parts - 9.Exercise I.flv	10.9 MB
3.Managing Assemblies - 5.Making Revisions - Part I.flv	10.9 MB
3.Managing Assemblies - 6.Making Revisions - Part II.flv	10.4 MB
1.PDM Overview - 2.SolidWorks PDM Interface.flv	10.3 MB
2.Managing Parts - 7.OpenCheck Out.flv	9.9 MB
2.Managing Parts - 2.Checking In a New Part - I.flv	9.8 MB
3.Managing Assemblies - 8.Toolbox - Overview.flv	9.1 MB
4.Managing Drawings - 2.Check In Part with Drawing.flv	8.7 MB
7.Basic Vault Admin for Clients - 4.Overwriting a Revision.flv	8.4 MB
4.Managing Drawings - 3.Adding a Drawing to a Part.flv	8.4 MB
2.Managing Parts - 13.Advanced Search Functionality.flv	8.2 MB
8.Appendix - 2.SolidWorks PDM Options.flv	7.6 MB
5.Managing Other Filetypes - 2.Non-SolidWorks Files.flv	7.5 MB
3.Managing Assemblies - 4.Making Revisions - Overview.flv	7.4 MB
7.Basic Vault Admin for Clients - 7.Deleting Files or Revisions.flv	6.6 MB
7.Basic Vault Admin for Clients - 5.Bumping Revisions.flv	6.6 MB
2.Managing Parts - 6.Releasing Ownership.flv	6.5 MB
7.Basic Vault Admin for Clients - 6.Renaming Files.flv	6.4 MB
2.Managing Parts - 11.Opening Previous Revisions.flv	6.1 MB
2.Managing Parts - 12.Basic Search Functionality.flv	6.0 MB
8.Appendix - 1.Colors and Icons.flv	5.7 MB
7.Basic Vault Admin for Clients - 3.Creating Sub-Projects.flv	5.2 MB
7.Basic Vault Admin for Clients - 2.Changing a Project.flv	5.2 MB
2.Managing Parts - 5.Displaying Labels.flv	5.1 MB
3.Managing Assemblies - 2.Assembly Structure.flv	4.9 MB
6.Lifecycles - 1.Lifecycle Overview.flv	3.0 MB
4.Managing Drawings - 1.Introduction.flv	2.7 MB
5.Managing Other Filetypes - 3.Non-Revision Controlled Files.flv	2.5 MB
7.Basic Vault Admin for Clients - 1.Introduction.flv	1.8 MB
2.Managing Parts - 1.Introduction.flv	1.6 MB
3.Managing Assemblies - 1.Introduction.flv	1.3 MB
/2011 Surfacing Essentials/
1.Surfacing - 21.Freeforms - Part B.flv	20.7 MB
1.Surfacing - 3.Basic Surfaces.flv	17.1 MB
1.Surfacing - 20.Freeforms - Part A.flv	16.6 MB
1.Surfacing - 6.Ruled Surface - Part B.flv	15.9 MB
1.Surfacing - 8.Knit Surfaces.flv	15.0 MB
1.Surfacing - 15.Filled Surface.flv	14.6 MB
1.Surfacing - 14.Surface to Solid Conversion.flv	13.6 MB
1.Surfacing - 9.Trimming Surfaces - Part A.flv	12.4 MB
1.Surfacing - 10.Trimming Surfaces - Part B.flv	11.5 MB
1.Surfacing - 22.Boundary Surfaces.flv	10.3 MB
1.Surfacing - 16.Delete Faces.flv	10.0 MB
1.Surfacing - 5.Ruled Surface - Part A.flv	8.9 MB
1.Surfacing - 12.Untrimming Surfaces.flv	8.7 MB
1.Surfacing - 18.Replace Face.flv	7.8 MB
1.Surfacing - 13.Deleting Holes.flv	6.3 MB
1.Surfacing - 2.What is a Surface.flv	5.6 MB
1.Surfacing - 11.Extending Surfaces.flv	5.4 MB
1.Surfacing - 19.Cutting with Surfaces.flv	5.3 MB
1.Surfacing - 4.Planar Surface.flv	4.2 MB
1.Surfacing - 7.Offset Surfaces.flv	4.2 MB
1.Surfacing - 17.Move Face.flv	3.3 MB
1.Surfacing - 1.Introduction.flv	3.0 MB
Total files 836