Linkedin Autodesk Inventor 2022 Essential Training | 2F355C4114150C74E5724D877997D0E9B3B1CEF7

Linkedin Autodesk Inventor 2022 Essential Training

Name	Linkedin - Autodesk Inventor 2022 Essential Training	DOWNLOAD Copy Link
Total Size	1.1 GB
Total Files	363
Last Seen	2025-03-11 23:41
Hash	2F355C4114150C74E5724D877997D0E9B3B1CEF7

/1. Introduction/
1. Design products with Autodesk Inventor 2022.mp4	3.7 MB
2. Use the exercise files.mp4	1.0 MB
3. Certification overview.mp4	7.3 MB
/10. Build Parts with Placed Features/
1. Add concentric holes.mp4	17.2 MB
2. Add linear holes.mp4	25.9 MB
3. Add threaded holes.mp4	14.8 MB
4. Modify edges with fillets and chamfers.mp4	14.1 MB
5. Hollow a part with the shell feature.mp4	21.5 MB
/11. Create Patterns of Features/
1. Create rectangular feature patterns.mp4	21.1 MB
2. Create circular patterns.mp4	12.8 MB
3. Mirror part features.mp4	14.2 MB
/12. Add Parts to an Assembly File/
1. Introduction to assemblies.mp4	9.8 MB
2. Place components.mp4	22.1 MB
3. Create and edit components in an assembly.mp4	34.1 MB
/13. Use Constraints to Position Parts/
1. Mate and Flush constraint.mp4	40.4 MB
2. Angle constraint.mp4	14.7 MB
3. Insert constraint.mp4	14.1 MB
4. Drive constraints.mp4	22.5 MB
/14. Create Drawing Views/
1. Explore initial drawing creation.mp4	18.6 MB
2. Place base and projected views.mp4	24.4 MB
3. Create section views.mp4	25.2 MB
4. Create detail views.mp4	12.5 MB
/15. Create Basic Annotations/
1. Create general dimensions.mp4	18.3 MB
2. Change dimension precision.mp4	12.2 MB
3. Create baseline ordinate and chain dimensions.mp4	14.5 MB
/16. Conclusion/
1. Next steps.mp4	3.0 MB
/2. Basic Concepts/
1. Explore major workflow steps.mp4	7.9 MB
2. Home dashboard.mp4	11.5 MB
3. Review different file types.mp4	7.7 MB
/3. Leverage the Project/
1. Create a practice project.mp4	7.3 MB
2. Set up the exercise files project.mp4	6.3 MB
/4. Navigate the Interface/
1. Navigate using the ViewCube.mp4	19.8 MB
2. Navigate using the navigation tools.mp4	16.0 MB
3. Use the browser and right-click menu.mp4	5.5 MB
/5. Sketch Concepts/
1. Introduce sketching.mp4	16.6 MB
2. Work with origin geometry.mp4	8.6 MB
3. Understand constraints.mp4	24.2 MB
/6. Create Sketch Geometry/
1. Draw lines.mp4	22.0 MB
2. Create rectangles and arcs.mp4	34.5 MB
3. Create splines.mp4	29.3 MB
4. Construction geometry.mp4	13.2 MB
5. Dimensioning.mp4	27.0 MB
6. Parameters.mp4	21.7 MB
/7. Modify Sketch Geometry/
1. Extend and trim sketch geometry.mp4	11.6 MB
2. Offset sketch geometry.mp4	12.2 MB
3. Pattern and mirror sketch geometry.mp4	20.4 MB
/8. Work Features and Projections/
1. Understand work features.mp4	9.9 MB
2. Create offset workplanes.mp4	12.5 MB
3. Create additional types of workplanes.mp4	21.6 MB
4. Create a workpoint and work axis.mp4	9.1 MB
5. Project geometry.mp4	16.4 MB
/9. Understand Part Modeling/
1. Part feature introduction.mp4	12.0 MB
10. Editing sculpted shapes using edit form.mp4	14.9 MB
2. Create a base extrusion.mp4	25.3 MB
3. Create an extrusion to the next face.mp4	14.6 MB
4. Create revolves.mp4	29.3 MB
5. Create a sweep.mp4	20.2 MB
6. Complex shapes with the Loft tool.mp4	32.2 MB
7. Controlling lofts with rails.mp4	21.1 MB
8. Introduction to organic shapes with T-Splines.mp4	5.5 MB
9. Create a base T-Splines form.mp4	10.1 MB
/.../01_Basic concepts/01_03/
ANSI B18.2.2 - 1_4 - 20(3).ipt	187.9 KB
ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt	214.5 KB
ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt	213.0 KB
ANSI B18.3 - 2-56 UNC - 0.375(31).ipt	195.6 KB
ANSI B18.3 - 3-48 UNC - 0.375(31).ipt	208.9 KB
ANSI B18.3 - 4-40 UNC - 0.875(31).ipt	202.2 KB
ASME B18.21.1 - No. 10. Carbon Steel(4).ipt	185.9 KB
Air Adjuster.ipt	149.0 KB
Beveled Sleeve.ipt	132.6 KB
Brake Pad.ipt	166.4 KB
Carburetor Housing.ipt	210.9 KB
Carburetor Housing_v2.ipt	188.4 KB
Carburetor Housing_v3.idw	271.4 KB
Carburetor Housing_v3.ipt	251.4 KB
Carburetor.iam	231.9 KB
Clutch Bearing.ipt	120.8 KB
Clutch Gear.ipt	247.3 KB
Clutch Housing.ipt	186.4 KB
Clutch Prop Mount.ipt	362.5 KB
Clutch Sleeve11.ipt	112.6 KB
Clutch Sleeve14.ipt	151.0 KB
Cone.ipt	433.7 KB
Crank Arm.ipt	100.4 KB
Crankshaft Cover.ipt	219.1 KB
Crankshaft.ipt	179.7 KB
Engine Block.ipt	2.1 MB
Engine.iam	2.0 MB
Engine.idw	1.2 MB
Engine.ipn	100.4 KB
Engine_v2.ipn	116.2 KB
Face Plate.ipt	219.6 KB
Fuel Adjuster.ipt	176.1 KB
Fuel Intake Adjuster Pin.ipt	142.3 KB
Fuel Intake.ipt	167.4 KB
Gas Regulator.ipt	187.4 KB
Heat Sink v2.ipt	84.5 KB
Heat Sink.ipt	631.8 KB
Hex Cap.ipt	135.2 KB
Horseshoe Clip.ipt	134.1 KB
Mixture Control.ipt	224.8 KB
Muffler Tip.ipt	782.3 KB
Muffler.ipt	1.4 MB
Piston Pin.ipt	86.0 KB
Piston Shaft.ipt	150.5 KB
Piston.ipt	140.8 KB
Prop Mount.ipt	371.7 KB
Prop.ipt	1.3 MB
Pulley Shaft.ipt	120.8 KB
Screw Lock.ipt	129.0 KB
Sleeve.ipt	111.6 KB
Starter Cover.ipt	263.7 KB
Starter Handle.ipt	314.9 KB
Washer.ipt	107.0 KB
washer4.ipt	82.9 KB
/.../03_Navigating the interface/03_01/
ANSI B18.2.2 - 1_4 - 20(3).ipt	187.9 KB
ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt	214.5 KB
ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt	213.5 KB
ANSI B18.3 - 2-56 UNC - 0.375(31).ipt	195.6 KB
ANSI B18.3 - 3-48 UNC - 0.375(31).ipt	208.9 KB
ANSI B18.3 - 4-40 UNC - 0.875(31).ipt	202.2 KB
ASME B18.21.1 - No. 10. Carbon Steel(4).ipt	186.4 KB
Air Adjuster.ipt	149.0 KB
Beveled Sleeve.ipt	132.6 KB
Brake Pad.ipt	166.4 KB
Carburetor Housing.ipt	210.9 KB
Carburetor Housing_v2.ipt	188.4 KB
Carburetor Housing_v3.idw	271.4 KB
Carburetor Housing_v3.ipt	248.8 KB
Carburetor.iam	255.5 KB
Clutch Bearing.ipt	121.3 KB
Clutch Gear.ipt	247.3 KB
Clutch Housing.ipt	186.9 KB
Clutch Prop Mount.ipt	362.5 KB
Clutch Sleeve11.ipt	112.6 KB
Clutch Sleeve14.ipt	151.0 KB
Cone.ipt	433.2 KB
Crank Arm.ipt	100.4 KB
Crankshaft Cover.ipt	219.1 KB
Crankshaft.ipt	179.7 KB
Engine Block.ipt	2.1 MB
Engine.iam	2.0 MB
Engine.idw	1.2 MB
Engine.ipn	100.4 KB
Engine_v2.ipn	116.2 KB
Face Plate.ipt	219.6 KB
Fuel Adjuster.ipt	176.1 KB
Fuel Intake Adjuster Pin.ipt	142.3 KB
Fuel Intake.ipt	167.4 KB
Gas Regulator.ipt	187.4 KB
Heat Sink v2.ipt	84.5 KB
Heat Sink.ipt	631.8 KB
Hex Cap.ipt	135.2 KB
Horseshoe Clip.ipt	134.1 KB
Mixture Control.ipt	225.3 KB
Muffler Tip.ipt	782.3 KB
Muffler.ipt	1.4 MB
Piston Pin.ipt	86.0 KB
Piston Shaft.ipt	150.5 KB
Piston.ipt	140.8 KB
Prop Mount.ipt	371.7 KB
Prop.ipt	1.3 MB
Pulley Shaft.ipt	120.8 KB
Screw Lock.ipt	129.0 KB
Sleeve.ipt	111.6 KB
Starter Cover.ipt	263.7 KB
Starter Handle.ipt	314.9 KB
Washer.ipt	107.0 KB
washer4.ipt	82.9 KB
/.../03_Navigating the interface/03_02/
ANSI B18.2.2 - 1_4 - 20(3).ipt	187.9 KB
ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt	214.5 KB
ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt	213.0 KB
ANSI B18.3 - 2-56 UNC - 0.375(31).ipt	195.6 KB
ANSI B18.3 - 3-48 UNC - 0.375(31).ipt	209.4 KB
ANSI B18.3 - 4-40 UNC - 0.875(31).ipt	202.2 KB
ASME B18.21.1 - No. 10. Carbon Steel(4).ipt	186.4 KB
Air Adjuster.ipt	149.0 KB
Beveled Sleeve.ipt	132.6 KB
Brake Pad.ipt	166.4 KB
Carburetor Housing.ipt	210.9 KB
Carburetor Housing_v2.ipt	188.4 KB
Carburetor Housing_v3.idw	271.4 KB
Carburetor Housing_v3.ipt	248.3 KB
Carburetor.iam	255.0 KB
Clutch Bearing.ipt	121.3 KB
Clutch Gear.ipt	247.3 KB
Clutch Housing.ipt	186.9 KB
Clutch Prop Mount.ipt	362.5 KB
Clutch Sleeve11.ipt	112.6 KB
Clutch Sleeve14.ipt	151.0 KB
Cone.ipt	433.7 KB
Crank Arm.ipt	100.4 KB
Crankshaft Cover.ipt	219.1 KB
Crankshaft.ipt	179.7 KB
Engine Block.ipt	2.1 MB
Engine.iam	2.0 MB
Engine.idw	1.2 MB
Engine.ipn	100.4 KB
Engine_v2.ipn	116.2 KB
Face Plate.ipt	219.6 KB
Fuel Adjuster.ipt	176.1 KB
Fuel Intake Adjuster Pin.ipt	142.3 KB
Fuel Intake.ipt	167.4 KB
Gas Regulator.ipt	187.4 KB
Heat Sink v2.ipt	84.5 KB
Heat Sink.ipt	631.3 KB
Hex Cap.ipt	135.2 KB
Horseshoe Clip.ipt	134.1 KB
Mixture Control.ipt	224.8 KB
Muffler Tip.ipt	782.3 KB
Muffler.ipt	1.4 MB
Piston Pin.ipt	86.0 KB
Piston Shaft.ipt	150.5 KB
Piston.ipt	140.8 KB
Prop Mount.ipt	371.7 KB
Prop.ipt	1.3 MB
Pulley Shaft.ipt	120.8 KB
Screw Lock.ipt	129.0 KB
Sleeve.ipt	111.6 KB
Starter Cover.ipt	262.7 KB
Starter Handle.ipt	314.9 KB
Washer.ipt	107.0 KB
washer4.ipt	82.9 KB
/.../03_Navigating the interface/03_03/
ANSI B18.2.2 - 1_4 - 20(3).ipt	188.4 KB
ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt	214.5 KB
ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt	213.5 KB
ANSI B18.3 - 2-56 UNC - 0.375(31).ipt	195.6 KB
ANSI B18.3 - 3-48 UNC - 0.375(31).ipt	209.4 KB
ANSI B18.3 - 4-40 UNC - 0.875(31).ipt	202.2 KB
ASME B18.21.1 - No. 10. Carbon Steel(4).ipt	186.4 KB
Air Adjuster.ipt	149.0 KB
Beveled Sleeve.ipt	132.6 KB
Brake Pad.ipt	166.4 KB
Carburetor Housing.ipt	210.9 KB
Carburetor Housing_v2.ipt	188.4 KB
Carburetor Housing_v3.idw	271.4 KB
Carburetor Housing_v3.ipt	248.3 KB
Carburetor.iam	255.0 KB
Clutch Bearing.ipt	121.3 KB
Clutch Gear.ipt	247.3 KB
Clutch Housing.ipt	186.9 KB
Clutch Prop Mount.ipt	362.5 KB
Clutch Sleeve11.ipt	112.6 KB
Clutch Sleeve14.ipt	151.0 KB
Cone.ipt	433.7 KB
Crank Arm.ipt	100.4 KB
Crankshaft Cover.ipt	219.1 KB
Crankshaft.ipt	180.2 KB
Engine Block.ipt	2.1 MB
Engine.iam	2.0 MB
Engine.idw	1.2 MB
Engine.ipn	100.4 KB
Engine_v2.ipn	116.2 KB
Face Plate.ipt	219.6 KB
Fuel Adjuster.ipt	176.1 KB
Fuel Intake Adjuster Pin.ipt	142.3 KB
Fuel Intake.ipt	167.4 KB
Gas Regulator.ipt	187.4 KB
Heat Sink v2.ipt	84.5 KB
Heat Sink.ipt	631.3 KB
Hex Cap.ipt	135.2 KB
Horseshoe Clip.ipt	134.1 KB
Mixture Control.ipt	225.3 KB
Muffler Tip.ipt	782.3 KB
Muffler.ipt	1.4 MB
Piston Pin.ipt	86.0 KB
Piston Shaft.ipt	150.5 KB
Piston.ipt	140.8 KB
Prop Mount.ipt	371.7 KB
Prop.ipt	1.3 MB
Pulley Shaft.ipt	120.8 KB
Screw Lock.ipt	129.5 KB
Sleeve.ipt	111.6 KB
Starter Cover.ipt	262.7 KB
Starter Handle.ipt	314.9 KB
Washer.ipt	107.0 KB
washer4.ipt	82.9 KB
/.../04_Sketching concepts/04_03/
Sketch Practice.ipt	91.1 KB
/.../05_Creating sketch geometry/05_02/
05_02_Simple_Computer_Mouse.ipt	256.0 KB
/.../05_Creating sketch geometry/05_03/
05_03_Computer_Mouse.ipt	283.6 KB
05_03_Computer_Mouse_Start.ipt	82.4 KB
/.../05_Creating sketch geometry/05_05/
Dimensioning Practice.ipt	88.1 KB
/.../06_Modifying sketch geometry/06_03/
Pattern Mirror Start.ipt	98.8 KB
/.../07_Work features and projections/07_02/
Work Planes.ipt	94.7 KB
/.../07_Work features and projections/07_03/
Work Planes.ipt	96.3 KB
/.../07_Work features and projections/07_04/
Work Axis Point Start.ipt	102.4 KB
/.../07_Work features and projections/07_05/
Projecting Geometry.ipt	88.1 KB
/.../08_Understanding part modeling/08_01/
Part feature intro.ipt	121.9 KB
/.../08_Understanding part modeling/08_03/
To Next Termination.ipt	95.7 KB
/.../08_Understanding part modeling/08_06/
Loft.ipt	175.1 KB
/.../08_Understanding part modeling/08_07/
Loft Complete.ipt	226.3 KB
Loft Start.ipt	89.6 KB
/.../08_Understanding part modeling/08_10/
Base Form Start.ipt	203.8 KB
/.../09_Building parts with placed features/09_01/
Concentric Holes Start.ipt	120.8 KB
Holes Complete.ipt	156.7 KB
/.../09_Building parts with placed features/09_02/
Holes Complete.ipt	156.7 KB
Linear Holes Start.ipt	130.6 KB
/.../09_Building parts with placed features/09_03/
Holes Complete.ipt	156.7 KB
Threaded Holes Start.ipt	145.4 KB
/.../09_Building parts with placed features/09_04/
Fillet Chamfer Complete.ipt	186.4 KB
Fillet Chamfer Start.ipt	157.7 KB
/.../09_Building parts with placed features/09_05/
Bottle Start.ipt	174.6 KB
Shell Start.ipt	95.2 KB
/.../10_Creating feature patterns/10_01/
Rectangular Pattern Start.ipt	92.2 KB
/.../10_Creating feature patterns/10_02/
Circular Pattern Start.ipt	108.0 KB
/.../10_Creating feature patterns/10_03/
Mirror Start.ipt	127.5 KB
/.../11_Adding parts to an assembly file/11_01/
Connecting Rod.ipt	97.8 KB
Connector.ipt	114.7 KB
Crank Handle.ipt	115.2 KB
Crank Rod.ipt	87.0 KB
Joint.ipt	145.4 KB
Pin.ipt	105.5 KB
Universal Joint.iam	161.8 KB
base.ipt	129.5 KB
/.../11_Adding parts to an assembly file/11_02/
Connecting Rod.ipt	97.8 KB
Connector.ipt	115.2 KB
Crank Handle.ipt	115.7 KB
Crank Rod.ipt	87.6 KB
Joint.ipt	145.4 KB
Pin.ipt	106.5 KB
Universal Joint.iam	161.8 KB
base.ipt	129.5 KB
/.../11_Adding parts to an assembly file/11_03/
Connecting Rod.ipt	97.3 KB
Connector.ipt	115.2 KB
Crank Handle.ipt	115.7 KB
Crank Rod.ipt	87.6 KB
Joint.ipt	144.9 KB
Pin.ipt	106.0 KB
Universal Joint.iam	161.8 KB
base.ipt	129.5 KB
/.../12_Using constraints to position parts/12_01/
Connecting Rod.ipt	97.8 KB
Connector.ipt	115.2 KB
Crank Handle.ipt	115.7 KB
Crank Rod.ipt	87.6 KB
Handle.ipt	158.7 KB
Joint.ipt	144.9 KB
Pin.ipt	106.5 KB
Universal Joint.iam	165.4 KB
Universal Shaft Start.iam	98.3 KB
Universal Shaft.iam	100.9 KB
base.ipt	130.0 KB
/.../12_Using constraints to position parts/12_02/
Connecting Rod.ipt	97.8 KB
Joint.ipt	144.9 KB
Universal Shaft Angle.iam	99.8 KB
/.../12_Using constraints to position parts/12_03/
Connecting Rod.ipt	97.8 KB
Joint.ipt	144.9 KB
Universal Shaft Start.iam	98.8 KB
/.../12_Using constraints to position parts/12_04/
Base.ipt	101.9 KB
Drive Constraints.iam	88.6 KB
Slide.ipt	99.8 KB
/.../13_Creating drawing views/13_02/
Engine Block.ipt	2.1 MB
/.../13_Creating drawing views/13_03/
Engine Block Section - COMPLETE.idw	833.5 KB
Engine Block Section.idw	215.6 KB
Engine Block.ipt	2.1 MB
/.../13_Creating drawing views/13_04/
Engine Block Detail - COMPLETE.idw	740.9 KB
Engine Block Detail.idw	723.5 KB
Engine Block.ipt	2.1 MB
/.../14_Create Basic Annotations/14_01/
Engine Block Dimensions.idw	343.0 KB
Engine Block.ipt	2.1 MB
/.../14_Create Basic Annotations/14_02/
Engine Block Precision.idw	360.4 KB
Engine Block.ipt	2.1 MB
/.../14_Create Basic Annotations/14_03/
Engine Block Baseline.idw	280.6 KB
Engine Block.ipt	2.1 MB
Total files 363