SolidProfessor SSQ | 4ED23C7D1D8A6F114973CD2028BCEA6AEB020E29

SolidProfessor SSQ

Name	SolidProfessor_SSQ	DOWNLOAD Copy Link
Total Size	11.9 GB
Total Files	2268
Hash	4ED23C7D1D8A6F114973CD2028BCEA6AEB020E29

/CAMWorks/2007CAMWorksEDM/
2.Wire EDM - 18.Part Exercise IB.flv	4.4 MB
2.Wire EDM - 12.Simulate Toolpaths.flv	3.6 MB
2.Wire EDM - 08.Interactive Features.flv	3.3 MB
2.Wire EDM - 17.Part Exercise IA.flv	3.3 MB
3.EDM Features - 3.Punch Features.flv	3.2 MB
2.Wire EDM - 07.Automatic Features.flv	3.1 MB
3.EDM Features - 2.Die Features.flv	2.8 MB
2.Wire EDM - 13.2 Axis Contour Options.flv	2.5 MB
2.Wire EDM - 16.4 Axis Contours.flv	2.3 MB
2.Wire EDM - 06.Define the Stock - Sketch.flv	2.3 MB
2.Wire EDM - 03.EDM Settings.flv	2.3 MB
2.Wire EDM - 14.Post Processing.flv	2.2 MB
2.Wire EDM - 15.Inserting Operations.flv	1.9 MB
3.EDM Features - 4.Open Profiles.flv	1.9 MB
2.Wire EDM - 09.Generate Operations.flv	1.8 MB
2.Wire EDM - 05.Define the Stock - Bounding Box.flv	1.8 MB
2.Wire EDM - 10.Program Zero.flv	1.8 MB
2.Wire EDM - 02.Define the Machine.flv	1.7 MB
2.Wire EDM - 11.Generate Toolpaths.flv	1.6 MB
1.Introduction - 2.Process Overview.flv	1.1 MB
1.Introduction - 1.CAMWorks Interface.flv	969.0 KB
2.Wire EDM - 04.Cutting Conditions.flv	900.3 KB
2.Wire EDM - 01.Introduction.flv	423.6 KB
3.EDM Features - 1.Introduction.flv	234.6 KB
/CAMWorks/2009CAMWorksMill/
2.2.5 Axis Milling - 17.Feature Options.flv	10.1 MB
4.Customizing CAMWorks - 3.User Defined Strategies - A.flv	9.6 MB
2.2.5 Axis Milling - 25.Inserting Avoid Areas.flv	8.6 MB
2.2.5 Axis Milling - 14.Adjusting Operations - Roughing Options A.flv	7.9 MB
2.2.5 Axis Milling - 10.Simulate Toolpaths.flv	7.3 MB
2.2.5 Axis Milling - 29.Part Exercise IC.flv	7.0 MB
2.2.5 Axis Milling - 27.Part Exercise IA.flv	6.6 MB
2.2.5 Axis Milling - 19.Contour Operations.flv	6.5 MB
2.2.5 Axis Milling - 15.Roughing Options B.flv	6.0 MB
2.2.5 Axis Milling - 18.Optimizing Toolpaths.flv	5.7 MB
2.2.5 Axis Milling - 05.Automatic Features.flv	5.4 MB
2.2.5 Axis Milling - 04.Define the Stock - Sketch.flv	5.4 MB
3.2.5 Axis Features - 07.Bosses.flv	5.2 MB
2.2.5 Axis Milling - 06.Interactive Features.flv	5.0 MB
4.Customizing CAMWorks - 4.User Defined Strategies - B.flv	4.9 MB
2.2.5 Axis Milling - 02.Define the Machine.flv	4.6 MB
3.2.5 Axis Features - 04.Pockets I.flv	4.3 MB
2.2.5 Axis Milling - 22.Inserting Operations.flv	4.1 MB
3.2.5 Axis Features - 12.Linear Pattern Feature.flv	4.0 MB
4.Customizing CAMWorks - 9.CAMWorks Options.flv	3.9 MB
2.2.5 Axis Milling - 28.Part Exercise IB.flv	3.9 MB
2.2.5 Axis Milling - 24.Combining & Linking Operations.flv	3.9 MB
2.2.5 Axis Milling - 16.Adjusting Operations - NC Parameters.flv	3.8 MB
2.2.5 Axis Milling - 07.Generate Operations.flv	3.6 MB
3.2.5 Axis Features - 14.Engraving.flv	3.6 MB
2.2.5 Axis Milling - 23.Sorting Operations.flv	3.5 MB
3.2.5 Axis Features - 13.Circular Pattern Feature.flv	3.4 MB
2.2.5 Axis Milling - 12.Operation Parameters- Tool Adjustments.flv	3.3 MB
2.2.5 Axis Milling - 03.Define the Stock - Bounding Box.flv	3.1 MB
3.2.5 Axis Features - 05.Pockets II.flv	3.1 MB
4.Customizing CAMWorks - 6.Setting Up ToolCribs.flv	3.1 MB
2.2.5 Axis Milling - 21.Post Processing Toolpaths.flv	3.0 MB
4.Customizing CAMWorks - 2.Adding Machines.flv	2.8 MB
3.2.5 Axis Features - 11.Holes.flv	2.6 MB
3.2.5 Axis Features - 08.Part Perimeters.flv	2.5 MB
2.2.5 Axis Milling - 08.Program Zero.flv	2.5 MB
3.2.5 Axis Features - 06.Pockets III.flv	2.5 MB
4.Customizing CAMWorks - 5.Adding Tools.flv	2.5 MB
2.2.5 Axis Milling - 26.Inserting Contains.flv	2.4 MB
4.Customizing CAMWorks - 8.Restoring the Database.flv	2.4 MB
4.Customizing CAMWorks - 7.Linking the Database.flv	2.3 MB
2.2.5 Axis Milling - 20.Creating Setup Sheets.flv	2.2 MB
3.2.5 Axis Features - 10.Slots.flv	2.0 MB
3.2.5 Axis Features - 09.Open Profiles.flv	1.9 MB
4.Customizing CAMWorks - 1.Introduction.flv	1.8 MB
3.2.5 Axis Features - 03.Face Feature.flv	1.6 MB
2.2.5 Axis Milling - 09.Generate Toolpaths.flv	1.5 MB
3.2.5 Axis Features - 02.Machinable Features.flv	1.4 MB
2.2.5 Axis Milling - 13.Operation Parameters- Feeds and Speeds.flv	1.2 MB
1.Introduction - 2.Process Overview.flv	1.1 MB
2.2.5 Axis Milling - 11.Reordering Operations.flv	940.6 KB
1.Introduction - 1.CAMWorks Interface.flv	919.9 KB
2.2.5 Axis Milling - 01.Introduction.flv	675.6 KB
3.2.5 Axis Features - 01.Introduction.flv	498.8 KB
/CAMWorks/2009CAMWorksTurn/
3.Turning Exercise - 3.Part Exercise 1C.flv	7.5 MB
2.Turning - 14.Rough Grooving Options.flv	7.0 MB
2.Turning - 10.Simulate Toolpaths.flv	6.4 MB
2.Turning - 02.Define the Machine.flv	5.0 MB
3.Turning Exercise - 2.Part Exercise 1B.flv	4.9 MB
2.Turning - 21.Setting up a Chuck.flv	4.2 MB
2.Turning - 12.Roughing Options.flv	4.1 MB
2.Turning - 05.Define the Stock - Revolved Sketch.flv	4.0 MB
2.Turning - 16.NC Options.flv	4.0 MB
2.Turning - 11.Tool Adjustments.flv	3.8 MB
2.Turning - 13.Finishing Options.flv	3.8 MB
4.Turn Features - 5.Cutoff Feature.flv	3.6 MB
2.Turning - 07.Define Features Interactively.flv	3.6 MB
2.Turning - 20.Inserting Operations.flv	3.3 MB
2.Turning - 08.Generating an Operation Plan.flv	3.2 MB
4.Turn Features - 2.OD Feature.flv	2.8 MB
2.Turning - 19.Post Processing.flv	2.5 MB
2.Turning - 06.Define Features Automatically.flv	2.3 MB
4.Turn Features - 4.ID Feature.flv	2.2 MB
2.Turning - 18.Create Setup Sheets.flv	2.2 MB
2.Turning - 03.The Setup Tab.flv	2.0 MB
2.Turning - 04.Define the Stock - Bar Stock.flv	2.0 MB
4.Turn Features - 3.Grooves.flv	2.0 MB
3.Turning Exercise - 1.Part Exercise 1A.flv	2.0 MB
2.Turning - 17.Lead In Lead Out Optins.flv	1.8 MB
4.Turn Features - 1.Face Feature.flv	1.6 MB
2.Turning - 09.Generating Toolpaths.flv	1.2 MB
1.Introduction - 2.Process Overview.flv	1.1 MB
1.Introduction - 1.CAMWorks Interface.flv	949.6 KB
2.Turning - 15.Finish Grooving Options.flv	887.8 KB
2.Turning - 01.Introduction.flv	655.6 KB
/FILES/
2011UTParts.zip	131.5 MB
COSMOSWorksDesignerParts.zip	49.9 MB
AdvancedAssemblies.zip	47.0 MB
2010UTParts.zip	44.4 MB
RoutingParts.zip	37.7 MB
AdvancedSurfacingParts.zip	29.6 MB
2007UpdateTrainingParts.zip	28.8 MB
2008UTParts.zip	27.6 MB
AdvancedParts.zip	27.6 MB
ccparts.zip	22.4 MB
2009UTParts.zip	17.6 MB
PhotoParts.zip	16.1 MB
CSBM-DoorLatch.zip	12.2 MB
mtpts.zip	12.1 MB
PDMWorksParts.zip	8.4 MB
AutoCADtoSWX.zip	7.3 MB
CS-PtsAssyAndPDFs.zip	6.9 MB
cwparts.zip	6.0 MB
SheetMetal.zip	5.3 MB
CSWP_SampleFiles.zip	4.0 MB
wldpts.zip	2.7 MB
TolAnalyst.zip	2.5 MB
SimulationXpress.zip	2.2 MB
Drawings_Parts.zip	1.9 MB
cwedmparts.zip	1.5 MB
cwturnparts.zip	1.0 MB
DriveWorksXpress.zip	211.7 KB
/.../2007 Update Training/
3.Parts & Features - 6.Freeforms - Part B.flv	9.2 MB
3.Parts & Features - 5.Freeforms - Part A.flv	7.1 MB
3.Parts & Features - 4.Draft Xpert.flv	6.9 MB
4.Assemblies - 4.Mate Xpert.flv	6.7 MB
4.Assemblies - 6.Belts and Chains.flv	6.1 MB
2.Sketching - 8.Splines.flv	5.4 MB
3.Parts & Features - 3.Fillet Xpert.flv	4.6 MB
4.Assemblies - 2.Rack and Pinion Mate.flv	4.5 MB
2.Sketching - 1.Sketch Blocks.flv	4.5 MB
1.General Enhancements - 1.Interface.flv	4.4 MB
7.Sheet Metal - 1.Corner trim.flv	3.9 MB
7.Sheet Metal - 3.Lofted Bends.flv	3.8 MB
1.General Enhancements - 5.Pack and Go.flv	3.7 MB
6.Detailing - 5.Detailing Enhancements.flv	3.7 MB
3.Parts & Features - 2.Feature Xpert.flv	3.6 MB
2.Sketching - 5.Fully Define Sketch.flv	3.4 MB
6.Detailing - 4.Dim Xpert.flv	3.4 MB
2.Sketching - 4.Sketch Patterns.flv	3.3 MB
1.General Enhancements - 3.Undo.flv	3.1 MB
3.Parts & Features - 1.Boundary Surfaces.flv	3.0 MB
6.Detailing - 6.Hole Tables.flv	3.0 MB
2.Sketching - 7.Sketch Xpert.flv	2.9 MB
6.Detailing - 2.General Options.flv	2.8 MB
4.Assemblies - 1.Multiple Mate Mode.flv	2.7 MB
2.Sketching - 2.Make Path.flv	2.7 MB
4.Assemblies - 3.Gear Mates.flv	2.7 MB
6.Detailing - 1.Balloons.flv	2.6 MB
5.Drawings - 2.Section Views.flv	2.4 MB
2.Sketching - 3.Copy Dimensions.flv	2.3 MB
7.Sheet Metal - 2.Edge Flanges.flv	2.2 MB
4.Assemblies - 7.Isolate Components.flv	2.1 MB
5.Drawings - 1.View Palette.flv	1.9 MB
1.General Enhancements - 2.Search.flv	1.8 MB
6.Detailing - 3.Dimensions.flv	1.6 MB
1.General Enhancements - 4.Screen Capture.flv	1.6 MB
2.Sketching - 6.Relations with Midpoints.flv	1.4 MB
7.Sheet Metal - 4.Flatten Sketches.flv	1.3 MB
4.Assemblies - 5.Mate Alignment.flv	1.1 MB
5.Drawings - 3.Broken Views.flv	1.0 MB
/.../2008 Update Training/
3.Parts & Features - 02.Instant 3D.flv	6.7 MB
6.Detailing - 5.TolAnalyst.flv	6.4 MB
3.Parts & Features - 08.Multibody Parts.flv	6.2 MB
1.General Enhancements - 2.Real View.flv	6.2 MB
6.Detailing - 3.Dim Xpert - Tolerance Status.flv	5.8 MB
1.General Enhancements - 1.Interface.flv	5.5 MB
4.Assemblies - 10.Motion Studies.flv	5.1 MB
1.General Enhancements - 4.Selective Display.flv	4.9 MB
6.Detailing - 2.Dim Xpert - Dimensions and Tolerances.flv	4.3 MB
5.Drawings - 5.Tables.flv	4.2 MB
5.Drawings - 6.Bill of Materials.flv	4.1 MB
3.Parts & Features - 10.Creating Property Managers.flv	4.0 MB
6.Detailing - 1.Dim Xpert - Creating Datums.flv	3.7 MB
4.Assemblies - 04.Screw Mate.flv	3.3 MB
3.Parts & Features - 09.Modifying Configurations.flv	3.3 MB
3.Parts & Features - 05.Cosmetic Patterns.flv	3.2 MB
6.Detailing - 4.Automatic GD&T.flv	3.0 MB
2.Sketching - 5.3D Sketch Symmetry.flv	2.7 MB
4.Assemblies - 09.Virtual Components.flv	2.7 MB
3.Parts & Features - 06.Solid Sweep.flv	2.7 MB
6.Detailing - 7.Dimensions and Leaders.flv	2.7 MB
5.Drawings - 1.Drawing Sheets.flv	2.7 MB
3.Parts & Features - 01.Corner Xpert.flv	2.5 MB
5.Drawings - 3.Section Views.flv	2.5 MB
5.Drawings - 2.Broken Views.flv	2.4 MB
4.Assemblies - 07.Hole Alignment.flv	2.4 MB
4.Assemblies - 08.Derived Components.flv	2.3 MB
2.Sketching - 3.Sketch Xpert.flv	2.2 MB
2.Sketching - 1.Sketch Tools.flv	2.2 MB
3.Parts & Features - 03.Boundary Surfaces.flv	2.1 MB
2.Sketching - 2.Rapid Sketch.flv	2.1 MB
7.Sheet Metal and Weldments - 1.Welded Corners.flv	2.0 MB
1.General Enhancements - 3.Design Clipart.flv	1.9 MB
2.Sketching - 4.Splines.flv	1.9 MB
3.Parts & Features - 07.Hole Series.flv	1.9 MB
4.Assemblies - 02.Path Mate.flv	1.9 MB
1.General Enhancements - 5.Document Properties.flv	1.8 MB
4.Assemblies - 01.Lock Mate.flv	1.8 MB
4.Assemblies - 05.Copy Components with Mates.flv	1.6 MB
4.Assemblies - 03.Linear Coupler Mate.flv	1.6 MB
3.Parts & Features - 04.Circular Patterns.flv	1.4 MB
6.Detailing - 6.Balloons.flv	1.4 MB
7.Sheet Metal and Weldments - 2.Exporting Flat Patterns.flv	1.4 MB
5.Drawings - 4.Sketch Alignment.flv	1.3 MB
4.Assemblies - 06.Assembly Xpert.flv	1.2 MB
/.../2009 3D Skills/
1.Parts - 08.Extruded Boss.flv	6.0 MB
1.Parts - 05.Circles and Arcs.flv	5.8 MB
3.Drawings - 2.Model View.flv	5.5 MB
3.Drawings - 1.Introducing Drawings.flv	5.0 MB
2.Assemblies - 4.Adding Mates.flv	4.8 MB
1.Parts - 07.Dimensions.flv	4.6 MB
1.Parts - 06.Geometric Relationships.flv	4.2 MB
3.Drawings - 6.BiII of Materials.flv	3.9 MB
1.Parts - 03.Lines.flv	3.8 MB
1.Parts - 02.The Sketcher.flv	3.4 MB
1.Parts - 09.Revolved boss.flv	2.9 MB
3.Drawings - 3.Section View.flv	2.8 MB
1.Parts - 12.Shell.flv	2.7 MB
3.Drawings - 7.Balloons.flv	2.6 MB
1.Parts - 04.Rectangles.flv	2.5 MB
2.Assemblies - 3.Insering Components.flv	2.4 MB
3.Drawings - 4.Detail View.flv	2.4 MB
3.Drawings - 5.Dimensions.flv	2.4 MB
2.Assemblies - 5.Collision Detection.flv	2.3 MB
2.Assemblies - 2.Starting an Assembly.flv	2.3 MB
1.Parts - 10.Convert Entities.flv	2.2 MB
1.Parts - 11.Sketches on Faces.flv	2.2 MB
1.Parts - 01.Course Introduction.flv	590.7 KB
2.Assemblies - 1.Introducing Assemblies.flv	422.5 KB
/.../2009 Advanced Assemblies/
4.Assembly Features - 4.Smart Components.flv	13.8 MB
8.Assembly Configurations - 3.Advanced Options.flv	11.1 MB
9.Top Down Assembly Design - 06.Inserting a New Component.flv	9.6 MB
1.Assembly Structure - 1.Creating Sub-Assemblies.flv	9.5 MB
8.Assembly Configurations - 4.Automatic Part Configurations.flv	8.2 MB
7.Troubleshooting Mates - 4.Mate Xpert.flv	8.1 MB
9.Top Down Assembly Design - 09.Removing External References - Part C.flv	7.9 MB
5.Component Patterns - 4.Mirroring Components.flv	7.8 MB
2.File Management - 2.References.flv	7.6 MB
5.Component Patterns - 1.Linear Patterns.flv	7.2 MB
8.Assembly Configurations - 5.Assembly Design Tables - Part A.flv	7.2 MB
4.Assembly Features - 5.Belts and Chains.flv	7.2 MB
3.File Management - 6.Document Revisions - Part B.flv	7.2 MB
9.Top Down Assembly Design - 07.Removing External References - Part A.flv	7.2 MB
2.File Management - 1.File Relationships.flv	7.0 MB
2.File Management - 3.Renaming Parts - Save As.flv	6.9 MB
9.Top Down Assembly Design - 04.In Context Features - Part A.flv	6.6 MB
6.Advanced Mate Types - 04.Limit Mate.flv	6.5 MB
9.Top Down Assembly Design - 02.Edit Part Mode.flv	6.3 MB
8.Assembly Configurations - 6.Assembly Design Tables - Part B.flv	6.3 MB
9.Top Down Assembly Design - 08.Removing External References - Part B.flv	6.1 MB
4.Assembly Features - 3.Hole Series.flv	5.6 MB
6.Advanced Mate Types - 07.Mate Reference Pairs.flv	5.6 MB
8.Assembly Configurations - 2.Adding Configurations - Part B.flv	5.6 MB
6.Advanced Mate Types - 03.Gear Mate.flv	5.6 MB
6.Advanced Mate Types - 13.Width Mate.flv	5.5 MB
5.Component Patterns - 3.Feature Driven Patterns.flv	5.3 MB
9.Top Down Assembly Design - 03.Component Visibility.flv	5.2 MB
7.Troubleshooting Mates - 3.Repairing Mate Errors - Part B.flv	5.0 MB
7.Troubleshooting Mates - 5.Replace Mate Entities.flv	4.9 MB
7.Troubleshooting Mates - 1.Assembly Mate Errors.flv	4.8 MB
9.Top Down Assembly Design - 05.In Context Features - Part B.flv	4.7 MB
7.Troubleshooting Mates - 2.Repairing Mate Errors - Part A.flv	4.6 MB
2.File Management - 4.Renaming Parts - SolidWorks Explorer.flv	4.6 MB
6.Advanced Mate Types - 05.Mate References.flv	4.4 MB
5.Component Patterns - 2.Circular Patterns.flv	4.1 MB
6.Advanced Mate Types - 08.Rack and Pinion Mate.flv	4.1 MB
4.Assembly Features - 2.Feature Scope.flv	4.1 MB
3.File Management - 7.Reloading and Replacing.flv	4.0 MB
6.Advanced Mate Types - 02.Cam Mate.flv	4.0 MB
8.Assembly Configurations - 1.Adding Configurations - Part A.flv	3.7 MB
4.Assembly Features - 1.Assembly Feature.flv	3.5 MB
1.Assembly Structure - 4.Folders vs. Sub-Assemblies.flv	3.4 MB
9.Top Down Assembly Design - 10.No External References.flv	3.2 MB
6.Advanced Mate Types - 06.Extracting Mate References.flv	3.2 MB
1.Assembly Structure - 2.Flexible Sub-Assemblies.flv	3.1 MB
6.Advanced Mate Types - 12.Hinge Mate.flv	3.0 MB
6.Advanced Mate Types - 11.Screw Mate.flv	3.0 MB
1.Assembly Structure - 3.Empty Sub-Assemblies.flv	2.7 MB
3.File Management - 5.Document Revisions - Part A.flv	2.6 MB
1.Assembly Structure - 5.Sub-Assemblies in Drawings.flv	2.6 MB
6.Advanced Mate Types - 09.Path Mate.flv	2.5 MB
6.Advanced Mate Types - 01.Symmetric Mate.flv	2.5 MB
6.Advanced Mate Types - 10.Linear Coupler Mate.flv	2.1 MB
9.Top Down Assembly Design - 01.Introduction.flv	1.2 MB
/.../2009 Advanced Parts/
03.Sweeps - 09.Threads.flv	13.8 MB
08.Surfacing - 20.Freeforms - Part B.flv	9.4 MB
05.Flex Feature - 02.Flex Feature.flv	8.4 MB
07.Core and Cavity - 01.Draft Analysis - Part A.flv	7.6 MB
01.Advanced Sketching - 08.3D Sketching with Planes.flv	7.5 MB
04.Lofts - 02.The Basic Loft.flv	7.0 MB
10.Weldments - 03.Trim-Extend - Part A.flv	6.3 MB
03.Sweeps - 06.Profile Orientation.flv	5.9 MB
06.Multibody Parts - 06.Combining Multiple bodies.flv	5.9 MB
07.Core and Cavity - 08.Side Cores - Part A.flv	5.9 MB
10.Weldments - 04.Trim-Extend - Part B.flv	5.8 MB
06.Multibody Parts - 08.Additional Techniques.flv	5.7 MB
04.Lofts - 05.Start-End Constraints.flv	5.5 MB
06.Multibody Parts - 04.Splitting Bodies - Part B.flv	5.4 MB
01.Advanced Sketching - 07.3D Sketching.flv	5.4 MB
10.Weldments - 09.Sub-Weldments.flv	5.3 MB
10.Weldments - 02.Layout Sketches.flv	5.3 MB
10.Weldments - 01.Introduction.flv	5.3 MB
10.Weldments - 06.Gussets & End Caps.flv	5.3 MB
04.Lofts - 06.Loft Guide Curves.flv	5.2 MB
04.Lofts - 07.Profile Geometry.flv	5.0 MB
11.Fastening Features - 5.Lip and Groove.flv	5.0 MB
02.Advanced Fillets - 02.Variable Radius Fillets.flv	5.0 MB
08.Surfacing - 19.Freeforms - Part A.flv	4.8 MB
08.Surfacing - 05.Ruled Surface - Part B.flv	4.7 MB
07.Core and Cavity - 09.Side Cores - Part B.flv	4.6 MB
01.Advanced Sketching - 11.Curve Through XYZ Points.flv	4.5 MB
07.Core and Cavity - 07.Creating the Mold.flv	4.4 MB
05.Flex Feature - 03.Bending.flv	4.3 MB
03.Sweeps - 02.The Basic Sweep.flv	4.3 MB
02.Advanced Fillets - 01.Fillet Options.flv	4.3 MB
08.Surfacing - 14.Filled Surface.flv	4.3 MB
06.Multibody Parts - 09.Positioning Bodies.flv	4.2 MB
11.Fastening Features - 3.Snap Groove.flv	4.0 MB
09.Indent Feature - 01.Indent Feature.flv	4.0 MB
02.Advanced Fillets - 07.Fillet Xpert.flv	4.0 MB
03.Sweeps - 04.Guide Curves.flv	3.9 MB
06.Multibody Parts - 05.Multibody Design Techniques.flv	3.9 MB
01.Advanced Sketching - 09.3D Sketch Planes.flv	3.8 MB
08.Surfacing - 02.Basic Surfaces.flv	3.7 MB
10.Weldments - 07.Cut Lists - Part A.flv	3.7 MB
10.Weldments - 05.Plates & Weld Beads.flv	3.7 MB
08.Surfacing - 13.Surface to Solid Conversion.flv	3.6 MB
11.Fastening Features - 1.Mounting Boss.flv	3.4 MB
10.Weldments - 08.Cut Lists - Part B.flv	3.4 MB
10.Weldments - 10.Custom Profiles.flv	3.3 MB
08.Surfacing - 09.Trimming Surfaces - Part B.flv	3.3 MB
11.Fastening Features - 4.Vent Feature.flv	3.3 MB
05.Flex Feature - 05.Tapering and Stretching.flv	3.2 MB
04.Lofts - 04.Loft Profiles.flv	3.2 MB
08.Surfacing - 08.Trimming Surfaces - Part A.flv	3.2 MB
03.Sweeps - 03.Path Options.flv	3.1 MB
01.Advanced Sketching - 06.3D Sketching - Intro.flv	3.1 MB
03.Sweeps - 07.Twist.flv	3.0 MB
06.Multibody Parts - 07.Swept Cuts with Bodies.flv	3.0 MB
03.Sweeps - 08.Cutting with Sweeps.flv	3.0 MB
06.Multibody Parts - 01.Introduction.flv	2.9 MB
09.Indent Feature - 02.Using Multiple Tool Bodies.flv	2.9 MB
08.Surfacing - 21.Boundary Surfaces.flv	2.9 MB
07.Core and Cavity - 05.Shut-Off Surfaces.flv	2.8 MB
08.Surfacing - 07.Knit Surfaces.flv	2.8 MB
03.Sweeps - 05.Multiple Guide Curves.flv	2.8 MB
04.Lofts - 09.Adding Loft Sections.flv	2.7 MB
06.Multibody Parts - 03.Splitting Bodies - Part A.flv	2.7 MB
08.Surfacing - 15.Delete Faces.flv	2.7 MB
01.Advanced Sketching - 15.Intersection Curve.flv	2.6 MB
09.Indent Feature - 03.Multiple Tool Regions.flv	2.5 MB
06.Multibody Parts - 02.Creating Multiple Bodies.flv	2.2 MB
04.Lofts - 08.Centerline.flv	2.2 MB
01.Advanced Sketching - 16.Derived Sketches.flv	2.2 MB
08.Surfacing - 17.Replace Face.flv	2.1 MB
11.Fastening Features - 2.Snap Hook.flv	2.1 MB
08.Surfacing - 04.Ruled Surface - Part A.flv	2.0 MB
08.Surfacing - 11.Untrimming Surfaces.flv	2.0 MB
07.Core and Cavity - 04.Parting Lines.flv	2.0 MB
01.Advanced Sketching - 14.Projected Curve.flv	1.9 MB
01.Advanced Sketching - 03.Partial Ellipse.flv	1.9 MB
01.Advanced Sketching - 04.Parabola.flv	1.9 MB
01.Advanced Sketching - 10.Helixes & Spirals.flv	1.9 MB
07.Core and Cavity - 03.Scale.flv	1.8 MB
04.Lofts - 10.Cutting with a Loft.flv	1.8 MB
01.Advanced Sketching - 12.Composite Curve.flv	1.8 MB
01.Advanced Sketching - 02.Ellipse.flv	1.6 MB
08.Surfacing - 12.Deleting Holes.flv	1.6 MB
05.Flex Feature - 04.Twisting.flv	1.5 MB
04.Lofts - 01.Introduction.flv	1.5 MB
02.Advanced Fillets - 05.Curvature Continuous Fillets.flv	1.4 MB
08.Surfacing - 01.Introduction.flv	1.4 MB
02.Advanced Fillets - 03.Face Fillets.flv	1.4 MB
09.Indent Feature - 04.Surfaces and the Cut Option.flv	1.4 MB
08.Surfacing - 18.Cutting with Surfaces.flv	1.4 MB
07.Core and Cavity - 02.Draft Analysis - Part B.flv	1.4 MB
08.Surfacing - 10.Extending Surfaces.flv	1.3 MB
07.Core and Cavity - 06.Parting Surface.flv	1.2 MB
01.Advanced Sketching - 17.Sketch Xpert.flv	1.2 MB
02.Advanced Fillets - 04.Hold Line Fillets.flv	1.2 MB
03.Sweeps - 01.Introduction.flv	1.1 MB
02.Advanced Fillets - 06.Full Round Fillets.flv	1.1 MB
04.Lofts - 03.Closing a Loft.flv	1.1 MB
01.Advanced Sketching - 05.Splitting Entities.flv	1.1 MB
01.Advanced Sketching - 13.Curve Through Reference Points.flv	1.1 MB
01.Advanced Sketching - 01.Polygon.flv	1.1 MB
08.Surfacing - 16.Move Face.flv	1.1 MB
08.Surfacing - 03.Planar Surface.flv	1.1 MB
08.Surfacing - 06.Offset Surfaces.flv	1.0 MB
05.Flex Feature - 01.Introduction.flv	403.3 KB
/.../2009 Advanced Surfacing/
4.Candle Holder - 14.Wrapping the Ivy.flv	15.5 MB
4.Candle Holder - 16.Scroll on Legs.flv	14.6 MB
2.Light Bulb - 6.Base Threads.flv	11.6 MB
3.Detergent Bottle - 18.Remaining Fillets and Thread.flv	11.4 MB
2.Light Bulb - 3.Fluorescent Tube.flv	9.5 MB
3.Detergent Bottle - 15.Creating the Label Inset.flv	9.3 MB
4.Candle Holder - 08.Thumb Rest Setup.flv	8.8 MB
3.Detergent Bottle - 03.Creating the Front Surface.flv	8.5 MB
4.Candle Holder - 11.Leaf Details.flv	8.0 MB
4.Candle Holder - 10.Leaf Free Form Shape.flv	7.4 MB
3.Detergent Bottle - 07.Making the Handle.flv	7.3 MB
1.Pasta Scoop - 18.Remaining Prongs and Holes.flv	7.2 MB
3.Detergent Bottle - 10.Blending the Handle Top.flv	6.6 MB
3.Detergent Bottle - 11.Blending the Handle Bottom.flv	6.4 MB
4.Candle Holder - 09.Completing the Thumb Rest.flv	6.2 MB
4.Candle Holder - 13.Wrapped Ivy Setup.flv	6.2 MB
4.Candle Holder - 15.Decorative Bead Pattern.flv	6.0 MB
2.Light Bulb - 2.Bulb Base.flv	5.7 MB
4.Candle Holder - 12.Leaf Pattern.flv	5.4 MB
3.Detergent Bottle - 05.Making the Back Surface.flv	5.4 MB
4.Candle Holder - 07.Finger Loop.flv	5.4 MB
1.Pasta Scoop - 24.Mirror and Repair.flv	4.9 MB
3.Detergent Bottle - 14.Adding the Spout and Fillets.flv	4.8 MB
4.Candle Holder - 05.Handle Transition as Solid.flv	4.8 MB
3.Detergent Bottle - 09.Preparing the Handle Top.flv	4.6 MB
2.Light Bulb - 5.Completing the Tube.flv	4.5 MB
3.Detergent Bottle - 17.Applying a Multi-thickness Shell.flv	4.5 MB
1.Pasta Scoop - 22.Handle-top Shape.flv	4.1 MB
2.Light Bulb - 4.Connecting the Tube Top.flv	4.0 MB
3.Detergent Bottle - 02.Developing a Strategy.flv	4.0 MB
1.Pasta Scoop - 08.Curvature.flv	3.9 MB
1.Pasta Scoop - 19.Thickening the Bowl.flv	3.8 MB
1.Pasta Scoop - 10.Spline Settings.flv	3.8 MB
1.Pasta Scoop - 06.Spline Handles.flv	3.5 MB
1.Pasta Scoop - 01.Overview.flv	3.5 MB
1.Pasta Scoop - 03.Inserting the Sketch Picture.flv	3.5 MB
3.Detergent Bottle - 12.Bottle Neck and Bottom.flv	3.5 MB
1.Pasta Scoop - 25.Completing the Scoop.flv	3.4 MB
3.Detergent Bottle - 19.Calculating the Volume.flv	3.4 MB
3.Detergent Bottle - 04.Making the Label Surfaces.flv	3.3 MB
4.Candle Holder - 06.Handle Transition as Surface.flv	3.2 MB
3.Detergent Bottle - 08.Blending the Front and Back Faces.flv	3.2 MB
4.Candle Holder - 04.Sweeping the Handle.flv	3.2 MB
1.Pasta Scoop - 17.First Set of Prongs.flv	3.1 MB
3.Detergent Bottle - 16.Adding the Dome.flv	3.1 MB
1.Pasta Scoop - 20.Adding Fillets.flv	2.9 MB
1.Pasta Scoop - 15.The Outer Surface.flv	2.9 MB
1.Pasta Scoop - 14.Creating the Parting Line Curve.flv	2.8 MB
1.Pasta Scoop - 12.Sketching the Top View.flv	2.7 MB
3.Detergent Bottle - 06.Trimming the Surfaces.flv	2.5 MB
1.Pasta Scoop - 23.Handle Top Surface.flv	2.4 MB
1.Pasta Scoop - 16.Separating the Handle.flv	2.3 MB
1.Pasta Scoop - 04.Splines.flv	2.2 MB
1.Pasta Scoop - 02.Using Reference Images.flv	2.1 MB
3.Detergent Bottle - 13.Making the Surface Model into a Solid.flv	2.0 MB
1.Pasta Scoop - 11.Tracing the Side View.flv	2.0 MB
1.Pasta Scoop - 05.Control Points.flv	1.8 MB
1.Pasta Scoop - 21.Handle Profile Shape.flv	1.8 MB
4.Candle Holder - 02.Revolving the Base.flv	1.7 MB
1.Pasta Scoop - 09.Widgets and Tools.flv	1.3 MB
1.Pasta Scoop - 13.Side View of the Parting Line.flv	1.2 MB
4.Candle Holder - 01.Overview.flv	1.0 MB
4.Candle Holder - 03.Planning the Handle.flv	899.0 KB
1.Pasta Scoop - 07.Control Polygon.flv	874.2 KB
3.Detergent Bottle - 01.Overview.flv	711.1 KB
2.Light Bulb - 1.Overview.flv	462.9 KB
/.../2009 AutoCAD to SolidWorks/
1.AutoCAD to SolidWorks Tools - 10.Blocks and Mechanisms.flv	8.4 MB
2.Parts - 08.Extruded Boss.flv	6.0 MB
2.Parts - 05.Circles and Arcs.flv	5.8 MB
4.Drawings - 2.Model View.flv	5.5 MB
1.AutoCAD to SolidWorks Tools - 02.What is SolidWorks.flv	5.1 MB
4.Drawings - 1.Introducing Drawings.flv	5.0 MB
1.AutoCAD to SolidWorks Tools - 09.3D Features.flv	4.9 MB
3.Assemblies - 4.Adding Mates.flv	4.8 MB
2.Parts - 07.Dimensions.flv	4.6 MB
2.Parts - 06.Geometric Relationships.flv	4.2 MB
4.Drawings - 6.BiII of Materials.flv	3.9 MB
2.Parts - 03.Lines.flv	3.8 MB
2.Parts - 02.The Sketcher.flv	3.4 MB
1.AutoCAD to SolidWorks Tools - 08.Orienting and Aligning Sketches.flv	3.1 MB
2.Parts - 09.Revolved boss.flv	2.9 MB
1.AutoCAD to SolidWorks Tools - 05.Import To Drawing.flv	2.8 MB
4.Drawings - 3.Section View.flv	2.8 MB
2.Parts - 12.Shell.flv	2.7 MB
1.AutoCAD to SolidWorks Tools - 06.Embedded AutoCAD Drawing.flv	2.7 MB
4.Drawings - 7.Balloons.flv	2.6 MB
2.Parts - 04.Rectangles.flv	2.5 MB
3.Assemblies - 3.Insering Components.flv	2.4 MB
4.Drawings - 4.Detail View.flv	2.4 MB
4.Drawings - 5.Dimensions.flv	2.4 MB
3.Assemblies - 5.Collision Detection.flv	2.3 MB
3.Assemblies - 2.Starting an Assembly.flv	2.3 MB
2.Parts - 10.Convert Entities.flv	2.2 MB
2.Parts - 11.Sketches on Faces.flv	2.2 MB
1.AutoCAD to SolidWorks Tools - 07.Import To Part.flv	1.7 MB
1.AutoCAD to SolidWorks Tools - 03.Import Options.flv	1.2 MB
1.AutoCAD to SolidWorks Tools - 04.DWG Editor Overview.flv	761.1 KB
1.AutoCAD to SolidWorks Tools - 01.Introduction.flv	702.1 KB
3.Assemblies - 1.Introducing Assemblies.flv	422.5 KB
/.../2009 Core Concepts/
5.Parts - 09.Part Exercise I B.flv	7.2 MB
5.Parts - 15.Parts Exercise II C.flv	7.0 MB
6.Assemblies - 13.Assembly Exercise I.flv	6.4 MB
5.Parts - 10.Part Exercise I C.flv	6.1 MB
5.Parts - 07.Appearances and Scenes (Part Color).flv	6.0 MB
3.Sketched Features - 2.Extruded Boss.flv	6.0 MB
5.Parts - 04.Design Intent.flv	6.0 MB
2.The Sketcher - 04.Circles and Arcs.flv	5.8 MB
5.Parts - 19.Parts Exercise III C.flv	5.4 MB
4.Applied Features - 02.Fillets.flv	5.3 MB
5.Parts - 06.Symmetry B.flv	5.3 MB
5.Parts - 13.Parts Exercise II A.flv	5.2 MB
2.The Sketcher - 05.Automatic Relations.flv	5.0 MB
6.Assemblies - 06.Adding Mates.flv	4.8 MB
5.Parts - 18.Parts Exercise III B.flv	4.7 MB
2.The Sketcher - 07.Dimensions.flv	4.6 MB
3.Sketched Features - 8.Loft.flv	4.6 MB
3.Sketched Features - 7.Sweep.flv	4.6 MB
1.Introduction - 02.SolidWorks Overview.flv	4.5 MB
2.The Sketcher - 09.Over Defined Sketches.flv	4.4 MB
5.Parts - 11.Editing Parts.flv	4.4 MB
5.Parts - 05.Symmetry A.flv	4.3 MB
2.The Sketcher - 06.Geometric Relations.flv	4.2 MB
5.Parts - 14.Parts Exercise II B.flv	4.2 MB
5.Parts - 29.Design Tables for Features.flv	4.0 MB
4.Applied Features - 15.Hole Wizard.flv	4.0 MB
2.The Sketcher - 02.Lines.flv	3.8 MB
3.Sketched Features - 9.Ribs.flv	3.8 MB
4.Applied Features - 10.Fill Patterns.flv	3.8 MB
6.Assemblies - 17.Assembly Exercise II A.flv	3.8 MB
6.Assemblies - 19.Exploding Assemblies.flv	3.7 MB
1.Introduction - 03.SolidWorks Interface.flv	3.7 MB
6.Assemblies - 18.Assembly Exercise II B.flv	3.7 MB
5.Parts - 24.Configurations - Dims.flv	3.6 MB
4.Applied Features - 14.Planes II B.flv	3.5 MB
2.The Sketcher - 01.The Sketcher.flv	3.4 MB
4.Applied Features - 03.Chamfers.flv	3.3 MB
1.Introduction - 05.View Manipulation.flv	3.2 MB
4.Applied Features - 11.Curve Driven Patterns.flv	3.2 MB
5.Parts - 25.Configurations - Features.flv	3.2 MB
5.Parts - 28.Creating Design Tables.flv	3.1 MB
6.Assemblies - 14.Interference Detection.flv	3.0 MB
6.Assemblies - 20.Assembly Exercise III A.flv	3.0 MB
4.Applied Features - 13.Planes II A.flv	2.9 MB
5.Parts - 12.Instant 3D.flv	2.9 MB
3.Sketched Features - 5.RevoIved Boss.flv	2.9 MB
5.Parts - 23.Configurations Intro.flv	2.8 MB
5.Parts - 27.Design Tables Dims.flv	2.8 MB
1.Introduction - 04.Task Pane Resources.flv	2.7 MB
4.Applied Features - 04.Shell.flv	2.7 MB
6.Assemblies - 11.Smart Mates.flv	2.7 MB
6.Assemblies - 07.Coincident Mate.flv	2.6 MB
6.Assemblies - 05.Positioning Parts.flv	2.6 MB
2.The Sketcher - 03.Rectangles.flv	2.5 MB
2.The Sketcher - 08.Fully Defined Sketches.flv	2.5 MB
5.Parts - 22.Parent Child Relations.flv	2.5 MB
5.Parts - 16.Parts Exercise II D.flv	2.5 MB
5.Parts - 02.Starting a Part.flv	2.5 MB
4.Applied Features - 08.Linear Patterns.flv	2.4 MB
6.Assemblies - 04.Inserting Components.flv	2.4 MB
4.Applied Features - 05.3D Mirroring.flv	2.4 MB
6.Assemblies - 12.Multiple Mate Mode.flv	2.4 MB
6.Assemblies - 15.Collision Detection.flv	2.3 MB
6.Assemblies - 03.Starting an Assembly.flv	2.3 MB
2.The Sketcher - 14.Convert Entities.flv	2.2 MB
2.The Sketcher - 15.Sketches on Faces.flv	2.2 MB
5.Parts - 08.Part Exercise I A.flv	2.1 MB
5.Parts - 17.Parts Exercise III A.flv	2.1 MB
2.The Sketcher - 10.Sketch FiIlets.flv	2.0 MB
2.The Sketcher - 13.Trim Tools.flv	2.0 MB
4.Applied Features - 06.Planes I.flv	1.9 MB
5.Parts - 03.Picking a Plane.flv	1.9 MB
6.Assemblies - 21.Assembly Exercise III B.flv	1.9 MB
5.Parts - 20.Parts Exercise III D.flv	1.8 MB
3.Sketched Features - 4.Extruded Cut.flv	1.6 MB
6.Assemblies - 16.Dynamic Clearance.flv	1.5 MB
4.Applied Features - 12.Creating Axes.flv	1.4 MB
4.Applied Features - 09.Circular Patterns.flv	1.4 MB
5.Parts - 21.Feature Suppression.flv	1.4 MB
3.Sketched Features - 3.Contours and Thin Features.flv	1.2 MB
2.The Sketcher - 11.Sketch Mirroring.flv	1.2 MB
5.Parts - 26.Design Tables Intro.flv	1.1 MB
2.The Sketcher - 12.Offset Entities.flv	1.1 MB
4.Applied Features - 07.Mirroring Bodies.flv	964.2 KB
6.Assemblies - 10.Tangent Mate.flv	933.0 KB
5.Parts - 01.Introducing Parts.flv	802.1 KB
6.Assemblies - 08.Distance Mate.flv	774.8 KB
3.Sketched Features - 6.RevoIved Cut.flv	771.8 KB
1.Introduction - 01.Course Introduction.flv	675.6 KB
6.Assemblies - 09.Concentric Mate.flv	550.0 KB
6.Assemblies - 02.Introducing Assemblies.flv	422.5 KB
3.Sketched Features - 1.Overview.flv	296.2 KB
6.Assemblies - 01.Overview.flv	272.2 KB
4.Applied Features - 01.Introduction.flv	138.6 KB
/SolidWorks/SolidWorks 2009/2009 Drawings/
2009 Drawings - 03.Model View.flv	5.5 MB
2009 Drawings - 02.Introducing Drawings.flv	5.0 MB
2009 Drawings - 22.Notes.flv	4.4 MB
2009 Drawings - 17.Driving Dimensions.flv	4.3 MB
2009 Drawings - 14.Bill of Materials.flv	3.9 MB
2009 Drawings - 23.Custom Templates.flv	3.8 MB
2009 Drawings - 24.Custom Sheet Formats.flv	3.7 MB
2009 Drawings - 21.Center Marks.flv	3.0 MB
2009 Drawings - 06.Section View.flv	2.8 MB
2009 Drawings - 15.Balloons.flv	2.6 MB
2009 Drawings - 08.Detail View.flv	2.4 MB
2009 Drawings - 16.Dimensions.flv	2.4 MB
2009 Drawings - 07.Assembly Section View.flv	2.0 MB
2009 Drawings - 13.Scale.flv	1.9 MB
2009 Drawings - 10.Exploded View.flv	1.5 MB
2009 Drawings - 19.Ordinate Dimensions.flv	1.4 MB
2009 Drawings - 18.Driven Dimensions.flv	1.4 MB
2009 Drawings - 20.Baseline Dimensions.flv	1.3 MB
2009 Drawings - 09.Broken View.flv	1.3 MB
2009 Drawings - 11.Display Options.flv	1.3 MB
2009 Drawings - 12.View Alignment.flv	1.2 MB
2009 Drawings - 05.Auxiliary View.flv	1.2 MB
2009 Drawings - 04.Projected View.flv	798.1 KB
2009 Drawings - 01.Overview.flv	227.2 KB
/.../2009 PhotoWorks Essentials/
5.Lighting Control - 7.Spot Light.flv	7.2 MB
4.Scenes - 5.Adding Depth.flv	6.8 MB
2.Appearances - 6.Advanced Mapping Options.flv	5.7 MB
4.Scenes - 3.Rooms.flv	4.9 MB
5.Lighting Control - 9.Lighting Scheme.flv	4.3 MB
5.Lighting Control - 8.Caustic Lighting.flv	4.3 MB
3.Decals - 5.Mapping Decals.flv	3.8 MB
5.Lighting Control - 3.Ambient Light.flv	3.6 MB
6.Rendered Output - 3.Printing.flv	3.6 MB
4.Scenes - 2.Scene Manager.flv	3.6 MB
5.Lighting Control - 6.Point Light.flv	3.6 MB
1.Getting Started - 3.Interface.flv	3.4 MB
4.Scenes - 6.Environment.flv	3.4 MB
2.Appearances - 7.Surface Properties.flv	3.2 MB
1.Getting Started - 8.Rendering.flv	3.2 MB
2.Appearances - 2.Appearances Part I.flv	3.2 MB
2.Appearances - 5.Textural Appearances.flv	2.8 MB
3.Decals - 3.Creating Decals.flv	2.7 MB
5.Lighting Control - 4.Directional Light Part I.flv	2.6 MB
2.Appearances - 3.Appearances Part II.flv	2.6 MB
1.Getting Started - 5.Appearance Editor.flv	2.6 MB
6.Rendered Output - 2.Anti-Aliasing.flv	2.5 MB
5.Lighting Control - 5.Directional Light Part II.flv	2.5 MB
4.Scenes - 4.Background.flv	2.4 MB
6.Rendered Output - 4.Render to File.flv	2.4 MB
3.Decals - 7.Masking.flv	2.3 MB
1.Getting Started - 4.Render Wizard.flv	2.2 MB
1.Getting Started - 6.Scene Editor.flv	2.1 MB
5.Lighting Control - 2.SolidWorks vs. PhotoWorks.flv	2.0 MB
3.Decals - 4.Applying Decals.flv	2.0 MB
1.Getting Started - 7.Preview Window.flv	1.9 MB
7.PhotoView 360 - 3.Appearances.flv	1.8 MB
4.Scenes - 1.Introduction.flv	1.8 MB
7.PhotoView 360 - 2.Interface.flv	1.8 MB
1.Getting Started - 1.Introduction.flv	1.6 MB
3.Decals - 6.Decal Illumination.flv	1.5 MB
7.PhotoView 360 - 5.Settings.flv	1.5 MB
2.Appearances - 4.Copy and Paste Options.flv	1.4 MB
7.PhotoView 360 - 6.Rendering.flv	1.3 MB
5.Lighting Control - 1.Introduction.flv	1.2 MB
2.Appearances - 8.Appearance Illumination.flv	1.2 MB
1.Getting Started - 2.Activating Photoworks.flv	1.1 MB
7.PhotoView 360 - 4.Environments.flv	1.1 MB
2.Appearances - 1.Introduction.flv	920.4 KB
3.Decals - 2.Decal Editor.flv	813.3 KB
3.Decals - 1.Introduction.flv	633.1 KB
7.PhotoView 360 - 1.PhotoView 360.flv	627.5 KB
6.Rendered Output - 1.Introduction.flv	616.3 KB
7.PhotoView 360 - 7.Gallery.flv	615.1 KB
/SolidWorks/SolidWorks 2009/2009 SheetMetal/
2009 Sheet Metal - 26.Convert to Sheet Metal.flv	6.0 MB
2009 Sheet Metal - 11.Miter Flange.flv	5.6 MB
2009 Sheet Metal - 23.Creating New Forming Tools.flv	5.4 MB
2009 Sheet Metal - 22.Modifying Forming Tools.flv	4.9 MB
2009 Sheet Metal - 02.Base Flange - Part A.flv	4.6 MB
2009 Sheet Metal - 09.Edge Flange - Part B.flv	3.9 MB
2009 Sheet Metal - 05.Bend Tables.flv	3.8 MB
2009 Sheet Metal - 06.Flat Pattern Options.flv	3.7 MB
2009 Sheet Metal - 14.Cuts Across Bends.flv	3.7 MB
2009 Sheet Metal - 24.Rip Feature.flv	3.7 MB
2009 Sheet Metal - 08.Edge Flange - Part A.flv	3.5 MB
2009 Sheet Metal - 27.Cones and Cylinders.flv	3.3 MB
2009 Sheet Metal - 29.Sheet Metal Drawings.flv	3.2 MB
2009 Sheet Metal - 30.Cross Breaks.flv	3.1 MB
2009 Sheet Metal - 25.Insert Bends.flv	3.0 MB
2009 Sheet Metal - 07.Corner Trim.flv	2.9 MB
2009 Sheet Metal - 03.Base Flange - Part B.flv	2.8 MB
2009 Sheet Metal - 18.Jog.flv	2.8 MB
2009 Sheet Metal - 13.Sheet Metal Cuts.flv	2.7 MB
2009 Sheet Metal - 17.Sketched Bend.flv	2.2 MB
2009 Sheet Metal - 28.Lofted Bends.flv	2.1 MB
2009 Sheet Metal - 21.Forming Tools.flv	2.1 MB
2009 Sheet Metal - 04.Bend Allowance.flv	1.8 MB
2009 Sheet Metal - 10.Edge Flange - Part C.flv	1.7 MB
2009 Sheet Metal - 15.Closed Corner.flv	1.5 MB
2009 Sheet Metal - 20.Design Library Cuts.flv	1.4 MB
2009 Sheet Metal - 19.Hem.flv	1.2 MB
2009 Sheet Metal - 16.Break Corner.flv	1.0 MB
2009 Sheet Metal - 12.Tab.flv	1.0 MB
2009 Sheet Metal - 01.Introduction.flv	972.8 KB
/SolidWorks/SolidWorks 2009/2009 SimulationXpress/
2.Exercises - 2.Exercise II - Pipe Reducer.flv	19.1 MB
2.Exercises - 1.Exercise I - Crank Shaft.flv	17.3 MB
1.Simulation - 10.Interpreting Results.flv	9.9 MB
1.Simulation - 02.Assumptions.flv	7.8 MB
1.Simulation - 07.Applying Loads.flv	7.3 MB
1.Simulation - 11.Optimizing a Design.flv	6.4 MB
3.Appendix - 1.Custom Materials.flv	6.3 MB
1.Simulation - 08.Running the Simulation.flv	5.9 MB
1.Simulation - 09.Factor of Safety.flv	5.8 MB
3.Appendix - 2.Split Line.flv	5.7 MB
1.Simulation - 06.Applying Restraints.flv	5.3 MB
1.Simulation - 01.Overview.flv	3.9 MB
1.Simulation - 03.Starting an Analysis.flv	3.5 MB
1.Simulation - 12.Summary.flv	2.3 MB
1.Simulation - 04.Units.flv	2.2 MB
1.Simulation - 05.Defining Material.flv	2.1 MB
/.../2009 SolidWorks Certification/
3.CSWA - CSWP Advanced Part Model - 13.Adding Fillets.flv	12.7 MB
5.CSWP Assembly Model - 14.Rotor In-context Relations 3.flv	8.0 MB
5.CSWP Assembly Model - 02.Modeling the First Component.flv	7.6 MB
4.CSWA Assembly Model - 05.Mating the Remaining Components.flv	7.1 MB
3.CSWA - CSWP Advanced Part Model - 11.The Top Boss.flv	7.1 MB
3.CSWA - CSWP Advanced Part Model - 09.The Rib Structure.flv	6.8 MB
3.CSWA - CSWP Advanced Part Model - 06.The First Screw Lug.flv	6.7 MB
2.CSWA Basic Part Sample - 03.The Top Fork.flv	6.2 MB
2.CSWA Basic Part Sample - 04.The Lower Fork.flv	6.0 MB
7.SimulationXpress Preparation - 08.Applying Loads.flv	6.0 MB
5.CSWP Assembly Model - 13.Rotor In-context Relations 2.flv	5.8 MB
5.CSWP Assembly Model - 17.Simulate Motion.flv	5.7 MB
1.The SolidWorks Certification Process - 08.Preparing for the Exam.flv	5.1 MB
3.CSWA - CSWP Advanced Part Model - 04.The Cylinder and Cone.flv	5.1 MB
7.SimulationXpress Preparation - 10.Interpreting Results.flv	4.9 MB
3.CSWA - CSWP Advanced Part Model - 07.The Screw Lug Pattern.flv	4.5 MB
4.CSWA Assembly Model - 02.Modeling the Parts.flv	4.5 MB
3.CSWA - CSWP Advanced Part Model - 14.Answering the Question.flv	4.4 MB
5.CSWP Assembly Model - 11.Modeling the Rotor Component.flv	4.1 MB
3.CSWA - CSWP Advanced Part Model - 12.The Tapped Holes.flv	4.0 MB
2.CSWA Basic Part Sample - 06.Answering the Question.flv	3.6 MB
3.CSWA - CSWP Advanced Part Model - 10.The Foot Pads.flv	3.6 MB
4.CSWA Assembly Model - 06.Answering the Question.flv	3.6 MB
3.CSWA - CSWP Advanced Part Model - 08.The Base Plate.flv	3.5 MB
5.CSWP Assembly Model - 16.Further Testing of In-context Relations.flv	3.5 MB
1.The SolidWorks Certification Process - 09.The Test Taking Process.flv	3.5 MB
4.CSWA Assembly Model - 03.Mating the First Part.flv	3.3 MB
2.CSWA Basic Part Sample - 02.The Central Cylinder.flv	3.2 MB
1.The SolidWorks Certification Process - 12.Modeling Question Preview.flv	3.1 MB
5.CSWP Assembly Model - 10.Making a Change to the Assembly.flv	3.0 MB
5.CSWP Assembly Model - 03.Starting the Assembly.flv	2.9 MB
5.CSWP Assembly Model - 09.Adding the Second Slider.flv	2.9 MB
4.CSWA Assembly Model - 04.Using SmartMates.flv	2.9 MB
5.CSWP Assembly Model - 15.Testing In-context Relations.flv	2.9 MB
2.CSWA Basic Part Sample - 05.Adding Fillets.flv	2.8 MB
3.CSWA - CSWP Advanced Part Model - 05.The Rectangular Flange.flv	2.8 MB
1.The SolidWorks Certification Process - 03.What is the CSWP.flv	2.7 MB
3.CSWA - CSWP Advanced Part Model - 02.Developing a Strategy.flv	2.6 MB
5.CSWP Assembly Model - 07.Mating the First Slider.flv	2.5 MB
1.The SolidWorks Certification Process - 02.What is the CSWA.flv	2.5 MB
7.SimulationXpress Preparation - 02.SimulationXpress Introduction.flv	2.4 MB
4.CSWA Assembly Model - 01.Problem Overview.flv	2.4 MB
5.CSWP Assembly Model - 08.Slider In-context Relations.flv	2.3 MB
3.CSWA - CSWP Advanced Part Model - 03.Where to Begin.flv	2.3 MB
3.CSWA - CSWP Advanced Part Model - 01.Problem Overview.flv	2.1 MB
1.The SolidWorks Certification Process - 11.Test Taking Strategy.flv	2.1 MB
5.CSWP Assembly Model - 12.Rotor In-context Relation 1.flv	1.8 MB
7.SimulationXpress Preparation - 09.Running the Simulation.flv	1.6 MB
7.SimulationXpress Preparation - 07.Applying Restraints.flv	1.5 MB
2.CSWA Basic Part Sample - 01.Where to Begin.flv	1.4 MB
5.CSWP Assembly Model - 05.In-context Considerations.flv	1.4 MB
5.CSWP Assembly Model - 04.Making Changes to the Model.flv	1.3 MB
7.SimulationXpress Preparation - 01.Overview.flv	1.1 MB
6.CSWA Drawings Preparation - 10.Relative to Model View.flv	932.7 KB
7.SimulationXpress Preparation - 04.Starting the Simulation.flv	923.7 KB
1.The SolidWorks Certification Process - 06.Test Location and Cost.flv	917.7 KB
6.CSWA Drawings Preparation - 06.Partial Section View.flv	908.5 KB
6.CSWA Drawings Preparation - 16.Predefined View.flv	903.7 KB
7.SimulationXpress Preparation - 03.SimulationXpress Sample Problem.flv	902.9 KB
7.SimulationXpress Preparation - 05.Units.flv	876.4 KB
7.SimulationXpress Preparation - 06.Defining Material.flv	853.4 KB
5.CSWP Assembly Model - 01.Problem Overview.flv	815.8 KB
6.CSWA Drawings Preparation - 03.Projected View.flv	771.3 KB
6.CSWA Drawings Preparation - 15.Empty View.flv	749.1 KB
6.CSWA Drawings Preparation - 02.Model View.flv	738.6 KB
5.CSWP Assembly Model - 18.Final Comments.flv	708.7 KB
1.The SolidWorks Certification Process - 07.Re-taking the Exam.flv	668.1 KB
6.CSWA Drawings Preparation - 07.Aligned Section View.flv	661.0 KB
1.The SolidWorks Certification Process - 05.SolidWorks Versions.flv	638.9 KB
6.CSWA Drawings Preparation - 05.Section View.flv	618.8 KB
1.The SolidWorks Certification Process - 04.Other Certifications.flv	540.2 KB
1.The SolidWorks Certification Process - 01.Why Get Certified.flv	539.3 KB
6.CSWA Drawings Preparation - 01.Drawing Section Overview.flv	476.0 KB
6.CSWA Drawings Preparation - 14.Alternate Position View.flv	420.1 KB
8.Conclusion - 01.Goodbye.flv	413.1 KB
5.CSWP Assembly Model - 06.Modeling the Slider.flv	406.2 KB
1.The SolidWorks Certification Process - 10.When You Pass the Exam.flv	382.2 KB
6.CSWA Drawings Preparation - 08.Broken Out Section View.flv	377.5 KB
6.CSWA Drawings Preparation - 13.Cropped View.flv	310.1 KB
6.CSWA Drawings Preparation - 04.Auxiliary View.flv	308.3 KB
6.CSWA Drawings Preparation - 09.Detail View.flv	291.2 KB
6.CSWA Drawings Preparation - 12.Break View.flv	235.5 KB
6.CSWA Drawings Preparation - 11.Standard 3 View.flv	232.9 KB
/.../2009 SolidWorks Routing/
4.Electrical Routes - 10.Routing through Clips.flv	9.0 MB
4.Electrical Routes - 02.Using Standard Cables.flv	8.9 MB
4.Electrical Routes - 17.From-To Lists and Guidelines.flv	7.9 MB
4.Electrical Routes - 07.Start and Add to Route.flv	7.7 MB
5.Electrical Conduits - 4.Flexible Electrical Conduit.flv	7.4 MB
5.Electrical Conduits - 3.Electrical Conduit Data.flv	6.8 MB
4.Electrical Routes - 13.Virtual Clips.flv	6.0 MB
1.Routing Basics - 6.Start a Route on the Fly.flv	5.6 MB
6.Creating Route Components - 6.Custom Pipe-Tube - Setup.flv	5.5 MB
6.Creating Route Components - 9.Custom Elbows - Design Tables.flv	5.5 MB
6.Creating Route Components - 8.Custom Elbows - Setup.flv	5.4 MB
6.Creating Route Components - 7.Custom Pipe-Tube - Design Tables.flv	5.2 MB
4.Electrical Routes - 03.Creating Standard Cables.flv	5.1 MB
3.Piping Routes - 2.Basic Pipe Route.flv	5.1 MB
6.Creating Route Components - 5.The Component Wizard.flv	5.0 MB
4.Electrical Routes - 05.Defining Wires.flv	4.9 MB
2.Tube Routes - 2.Basic Tube Route.flv	4.8 MB
1.Routing Basics - 3.Routing Components.flv	4.3 MB
5.Electrical Conduits - 2.Creating a Conduit Route.flv	4.1 MB
3.Piping Routes - 3.Adding Fittings.flv	4.1 MB
4.Electrical Routes - 16.Cable-Wire Library.flv	4.0 MB
3.Piping Routes - 8.Alternate Elbows.flv	3.9 MB
4.Electrical Routes - 04.Creating Custom Cables.flv	3.7 MB
4.Electrical Routes - 15.Component Library.flv	3.7 MB
2.Tube Routes - 5.Editing Tube Routes.flv	3.6 MB
7.Drawings - 3.Electrical - Drawings.flv	3.5 MB
4.Electrical Routes - 09.Inserting Clips.flv	3.4 MB
2.Tube Routes - 3.Auto Route.flv	3.2 MB
1.Routing Basics - 4.Start a Route by Drag and Drop.flv	3.1 MB
6.Creating Route Components - 2.Creating C-Points.flv	3.0 MB
7.Drawings - 2.Piping-Tubing.flv	2.9 MB
7.Drawings - 5.Electrical Tables.flv	2.9 MB
4.Electrical Routes - 11.Editing Route with Clips.flv	2.7 MB
1.Routing Basics - 7.Start a Route from Existing Components.flv	2.6 MB
7.Drawings - 9.Electrical Conduit.flv	2.6 MB
1.Routing Basics - 5.End a Route by Drag and Drop.flv	2.6 MB
3.Piping Routes - 7.Pipe Coverings.flv	2.5 MB
1.Routing Basics - 8.Routing Settings.flv	2.5 MB
1.Routing Basics - 2.Routing Overview.flv	2.5 MB
3.Piping Routes - 5.Pipe Penetration.flv	2.2 MB
7.Drawings - 7.Coverings.flv	2.1 MB
4.Electrical Routes - 08.Clips Overview.flv	1.8 MB
5.Electrical Conduits - 1.Introduction to Conduits.flv	1.7 MB
4.Electrical Routes - 14.Create Route from Electrical Data.flv	1.7 MB
3.Piping Routes - 6.Pipe Reducers.flv	1.7 MB
1.Routing Basics - 1.Routing Introduction.flv	1.6 MB
6.Creating Route Components - 4.The Design Library.flv	1.5 MB
2.Tube Routes - 4.Repair Route.flv	1.5 MB
6.Creating Route Components - 3.Creating R-Points.flv	1.4 MB
4.Electrical Routes - 06.Other Methods of Creating Routes.flv	1.4 MB
3.Piping Routes - 4.Editing Pipe Routes.flv	1.3 MB
7.Drawings - 4.Electrical - Rerouting Drawings.flv	1.2 MB
2.Tube Routes - 6.Editing Tube Diameter.flv	1.2 MB
4.Electrical Routes - 12.Rotate Clips.flv	1.2 MB
7.Drawings - 1.Drawings Intro.flv	1.0 MB
4.Electrical Routes - 01.Electrical Overview.flv	981.3 KB
7.Drawings - 8.Miscellaneous Parts.flv	973.3 KB
6.Creating Route Components - 1.Route Components.flv	897.1 KB
7.Drawings - 6.Additional BOM Information.flv	704.3 KB
3.Piping Routes - 1.Introduction to Piping.flv	485.5 KB
2.Tube Routes - 1.Introduction to Tubing.flv	346.7 KB
/.../2009 SolidWorks Simulation/
03.Meshing - 10.Mesh Refinement.flv	19.2 MB
03.Meshing - 05.Mid-Surfaces & Shell Alignment.flv	13.8 MB
10.Adaptive Methods - 3.The H-Adaptive Method.flv	11.4 MB
03.Meshing - 08.Mixed Shell Solid Mesh.flv	8.8 MB
03.Meshing - 02.Solid vs. Shell Mesh.flv	8.2 MB
02.Static Analysis of a Part - 13.Results - Displacement.flv	7.9 MB
11.Temperature Load - 2.Temperature Load.flv	7.5 MB
03.Meshing - 11.Meshing Tips.flv	7.4 MB
08.Using Connectors - 6.Bolt Connector.flv	7.3 MB
04.Beam Analysis - 3.Truss Analysis.flv	7.1 MB
03.Meshing - 09.Simplifying Geometry.flv	6.3 MB
11.Temperature Load - 3.Soft Spring and Inertial Relief.flv	6.2 MB
15.User Libraries - 1.Material Libraries.flv	6.1 MB
10.Adaptive Methods - 4.The P-Adaptive Method.flv	6.1 MB
05.Static Analysis of an Assembly - 5.Processing and Results.flv	6.1 MB
08.Using Connectors - 5.Spring Connector.flv	6.0 MB
06.Shrink Fit Analysis - 3.Shrink Fit Results.flv	5.4 MB
03.Meshing - 03.Sheet Metal Analysis (Using Shell Mesh).flv	5.3 MB
05.Static Analysis of an Assembly - 2.Assembly Analysis Setup.flv	5.2 MB
04.Beam Analysis - 2.Weldment Analysis Results.flv	5.2 MB
05.Static Analysis of an Assembly - 4.Refining Contact Conditions.flv	5.1 MB
09.Using Design Scenarios - 2.Setup and Parameters.flv	5.0 MB
02.Static Analysis of a Part - 05.Operating Environment - Fixtures.flv	5.0 MB
02.Static Analysis of a Part - 09.Results - Stress Plot.flv	4.9 MB
15.User Libraries - 2.Analysis Libraries.flv	4.9 MB
08.Using Connectors - 8.Spot Weld.flv	4.9 MB
03.Meshing - 04.Meshing Options.flv	4.9 MB
02.Static Analysis of a Part - 07.Processing.flv	4.8 MB
04.Beam Analysis - 1.Weldment Analysis Setup.flv	4.8 MB
09.Using Design Scenarios - 3.Defining Design Scenarios.flv	4.7 MB
08.Using Connectors - 4.Link Connector.flv	4.7 MB
02.Static Analysis of a Part - 15.Results - Factor of Safety Plot.flv	4.5 MB
07.Large Displacement Analysis - 2.Large Displacement Setup.flv	4.4 MB
02.Static Analysis of a Part - 12.Results - Iso Clipping.flv	4.4 MB
07.Large Displacement Analysis - 3.Large Displacement Results.flv	4.3 MB
09.Using Design Scenarios - 4.Design Scenario Results.flv	4.2 MB
02.Static Analysis of a Part - 11.Results - Section Clipping.flv	4.1 MB
02.Static Analysis of a Part - 10.Results - Adding Plots.flv	4.1 MB
03.Meshing - 07.Shell Analysis Results.flv	4.1 MB
06.Shrink Fit Analysis - 2.Setting Up a Shrink Fit Study.flv	4.0 MB
08.Using Connectors - 3.Pin Connector.flv	3.9 MB
12.Personalization Options - 5.Plot Options.flv	3.9 MB
03.Meshing - 06.Using Multiple Studies.flv	3.8 MB
08.Using Connectors - 2.Rigid Connector.flv	3.8 MB
08.Using Connectors - 7.Bearing Connector.flv	3.6 MB
05.Static Analysis of an Assembly - 3.Creating Contact Conditions.flv	3.3 MB
12.Personalization Options - 1.System Options.flv	3.0 MB
13.External Loads - A Reference - 5.Remote Load.flv	3.0 MB
15.User Libraries - 3.Using Library Items.flv	3.0 MB
12.Personalization Options - 3.Mesh Options.flv	2.9 MB
12.Personalization Options - 4.Results Options.flv	2.9 MB
13.External Loads - A Reference - 2.Force.flv	2.8 MB
02.Static Analysis of a Part - 06.Operating Environment - External Loads.flv	2.6 MB
12.Personalization Options - 2.Units and Symbol Display.flv	2.6 MB
01.Introduction - 2.Design Validation.flv	2.6 MB
10.Adaptive Methods - 2.Standard Adaptive Method.flv	2.3 MB
14.Fixtures - A Reference - 5.Use Reference Geometry.flv	2.3 MB
02.Static Analysis of a Part - 04.Creating a Study.flv	2.2 MB
14.Fixtures - A Reference - 3.Hinge.flv	2.2 MB
13.External Loads - A Reference - 6.Bearing Load.flv	2.1 MB
01.Introduction - 3.Assumptions.flv	1.9 MB
07.Large Displacement Analysis - 1.Large Displacement Overview.flv	1.9 MB
13.External Loads - A Reference - 1.Pressure.flv	1.9 MB
08.Using Connectors - 1.Connectors Overview.flv	1.8 MB
02.Static Analysis of a Part - 03.Analysis Setup.flv	1.8 MB
02.Static Analysis of a Part - 14.Results - Factor of Safety.flv	1.8 MB
10.Adaptive Methods - 1.Adaptive Methods Overview.flv	1.7 MB
02.Static Analysis of a Part - 02.Activating Simulation.flv	1.5 MB
14.Fixtures - A Reference - 6.On Flat Face.flv	1.4 MB
14.Fixtures - A Reference - 7.On Cylindrical Face.flv	1.1 MB
13.External Loads - A Reference - 4.Centrifugal Load.flv	1.0 MB
14.Fixtures - A Reference - 4.Symmetry.flv	1.0 MB
14.Fixtures - A Reference - 1.Fixed Geometry.flv	1.0 MB
14.Fixtures - A Reference - 8.On Spherical Face.flv	1.0 MB
02.Static Analysis of a Part - 08.Results - Overview.flv	1.0 MB
03.Meshing - 01.Meshing Overview.flv	986.5 KB
13.External Loads - A Reference - 3.Gravity.flv	924.8 KB
09.Using Design Scenarios - 1.Design Scenarios Overview.flv	889.8 KB
05.Static Analysis of an Assembly - 1.Analysis of an Assembly Overview.flv	798.4 KB
06.Shrink Fit Analysis - 1.Shrink Fit Overview.flv	742.7 KB
01.Introduction - 1.Welcome.flv	737.1 KB
11.Temperature Load - 1.Temperature Load Overview.flv	722.0 KB
02.Static Analysis of a Part - 16.Results - Summary.flv	628.8 KB
14.Fixtures - A Reference - 2.Roller-Sliding.flv	570.3 KB
02.Static Analysis of a Part - 01.Overview.flv	537.7 KB
text2	7.7 KB
/.../2009 SolidWorks Workgroup PDM/
1.PDM Overview - 2.SolidWorks PDM Interface.flv	14.1 MB
1.PDM Overview - 1.SolidWorks PDM Intro.flv	12.1 MB
3.Managing Assemblies - 09.Toolbox Components Without Rev Control.flv	5.1 MB
3.Managing Assemblies - 07.Assembly References Built vs Latest.flv	5.1 MB
3.Managing Assemblies - 03.Checking In a New Assembly.flv	4.9 MB
5.Managing Other Filetypes - 1.SolidWorks Explorer.flv	4.7 MB
2.Managing Parts - 08.Making Revisions.flv	4.4 MB
2.Managing Parts - 03.Checking In a New Part II.flv	4.3 MB
3.Managing Assemblies - 11.Collaborative Environments.flv	4.2 MB
4.Managing Drawings - 4.Assembly Drawing changes.flv	4.1 MB
2.Managing Parts - 11.Document Information.flv	3.8 MB
5.Managing Other Filetypes - 4.Attachments.flv	3.7 MB
3.Managing Assemblies - 10.Roolbox Components With Rev Control.flv	3.1 MB
2.Managing Parts - 04.Check-In Tips.flv	2.9 MB
3.Managing Assemblies - 06.Assembly Revisions Part II.flv	2.8 MB
2.Managing Parts - 09.Excercise I.flv	2.7 MB
2.Managing Parts - 10.Custom Properties.flv	2.6 MB
3.Managing Assemblies - 05.Assembly Revisions Part I.flv	2.6 MB
2.Managing Parts - 02.Checking In a New Part I.flv	2.6 MB
4.Managing Drawings - 2.Checking In a New Part With Drawing.flv	2.4 MB
2.Managing Parts - 07.Opening and Checking Out.flv	2.3 MB
7.Basic Vault Admin for Clients - 4.Overwriting a Revision.flv	2.3 MB
3.Managing Assemblies - 08.Toolbox Components Overview.flv	2.2 MB
5.Managing Other Filetypes - 2.Non-SolidWorks Files.flv	2.1 MB
4.Managing Drawings - 3.Adding Drawing to Existing Part.flv	2.1 MB
2.Managing Parts - 14.Advanced Searching.flv	2.0 MB
3.Managing Assemblies - 04.Assembly Revisions - Overview.flv	1.9 MB
2.Managing Parts - 12.Opening Previous Revisions.flv	1.8 MB
7.Basic Vault Admin for Clients - 5.Bumping Revisions.flv	1.8 MB
8.Appendix - 2.SolidWorks PDM Options.flv	1.7 MB
7.Basic Vault Admin for Clients - 7.Deleting files Or Revisions.flv	1.6 MB
7.Basic Vault Admin for Clients - 6.Renaming Files.flv	1.6 MB
2.Managing Parts - 06.Releasing Ownership.flv	1.5 MB
2.Managing Parts - 13.Basic Searching.flv	1.5 MB
7.Basic Vault Admin for Clients - 2.Changing A Project.flv	1.4 MB
8.Appendix - 1.Colors and Icons.flv	1.4 MB
2.Managing Parts - 05.Displaying Labels.flv	1.2 MB
7.Basic Vault Admin for Clients - 3.Creating Sub-Projects.flv	1.2 MB
3.Managing Assemblies - 02.Assembly Structure.flv	1.1 MB
5.Managing Other Filetypes - 3.Non-Revision Controlled files.flv	786.7 KB
4.Managing Drawings - 1.Intro.flv	684.6 KB
6.Lifecycles - 1.Lifecycle Overview.flv	681.4 KB
2.Managing Parts - 01.Introduction.flv	466.8 KB
7.Basic Vault Admin for Clients - 1.Introduction.flv	457.8 KB
3.Managing Assemblies - 01.Introduction.flv	448.1 KB
/SolidWorks/SolidWorks 2009/2009 TolAnalyst/
2.DimXpert - 11.DimXpert Exercise - Part I.flv	9.6 MB
2.DimXpert - 12.DimXpert Exercise - Part II.flv	6.4 MB
3.TolAnalyst - 7.TolAnalyst Exercise.flv	5.6 MB
2.DimXpert - 07.Tolerance Status.flv	4.9 MB
3.TolAnalyst - 6.Fixed-Floating Fasteners.flv	3.4 MB
3.TolAnalyst - 5.Analyzing the Results.flv	3.3 MB
2.DimXpert - 02.Auto Dimension Scheme.flv	3.3 MB
2.DimXpert - 08.DimXpert Options.flv	3.1 MB
2.DimXpert - 10.Pattern Feature.flv	2.8 MB
2.DimXpert - 06.Geometric Tolerances.flv	2.7 MB
2.DimXpert - 03.Datums.flv	2.6 MB
2.DimXpert - 04.Size Dimensions.flv	2.5 MB
3.TolAnalyst - 4.Assembly Constraints.flv	2.5 MB
3.TolAnalyst - 2.Establishing the Measurement.flv	2.5 MB
2.DimXpert - 05.Location Dimensions.flv	2.4 MB
2.DimXpert - 09.Using DimXpert Information in Drawings.flv	2.2 MB
2.DimXpert - 01.DimXpert Overview.flv	2.0 MB
1.Course Introduction - 1.Introduction.flv	2.0 MB
3.TolAnalyst - 3.Assembly Sequence.flv	1.2 MB
3.TolAnalyst - 1.TolAnalyst Overview.flv	1.2 MB
/.../2009 Update Training/
3.Parts & Features - 6.Instant 3D.flv	8.1 MB
1.General Enhancements - 9.Sensors.flv	5.6 MB
1.General Enhancements - 6.Materials and Appearances.flv	5.4 MB
5.Drawings and Detailing - 4.Restructuring BOMs.flv	5.3 MB
1.General Enhancements - 5.Custom Properties Part 2.flv	5.2 MB
6.Sheet Metal - 1.Convert to Sheet Metal.flv	4.8 MB
3.Parts & Features - 2.Fastening Features.flv	4.8 MB
4.Assemblies - 2.Clearance Verification.flv	4.7 MB
3.Parts & Features - 1.Ghost Images of Dangling Entities.flv	4.6 MB
3.Parts & Features - 7.Live Section View.flv	4.1 MB
2.Sketching - 1.Numeric Sketch Input.flv	4.0 MB
1.General Enhancements - 4.Custom Properties Part 1.flv	3.9 MB
5.Drawings and Detailing - 8.Title Block.flv	3.9 MB
7.Weldments - 1.Weldment Groups.flv	3.8 MB
2.Sketching - 7.Blocks.flv	3.5 MB
3.Parts & Features - 9.Split Feature.flv	3.3 MB
2.Sketching - 6.Equation Driven Curves.flv	3.2 MB
3.Parts & Features - 5.Equations.flv	3.2 MB
6.Sheet Metal - 3.Cross Breaks.flv	3.2 MB
4.Assemblies - 1.Large Assemblies.flv	3.1 MB
5.Drawings and Detailing - 6.Dimensions and Jogs.flv	3.0 MB
2.Sketching - 5.3D Sketches.flv	2.9 MB
1.General Enhancements - 7.Part Display.flv	2.9 MB
3.Parts & Features - 3.Freeform.flv	2.9 MB
1.General Enhancements - 2.View Orientation.flv	2.7 MB
4.Assemblies - 4.Bill of Materials.flv	2.7 MB
5.Drawings and Detailing - 7.Print Options.flv	2.6 MB
2.Sketching - 3.Slot Sketch.flv	2.6 MB
3.Parts & Features - 4.Ribs.flv	2.6 MB
4.Assemblies - 5.Assembly Features in Part.flv	2.5 MB
1.General Enhancements - 1.Interface.flv	2.4 MB
5.Drawings and Detailing - 1.Customized Drafting Standards.flv	2.4 MB
7.Weldments - 2.Trim Extend.flv	2.3 MB
2.Sketching - 2.Stretch Entitites.flv	2.2 MB
1.General Enhancements - 3.Magnifying Glass.flv	2.1 MB
5.Drawings and Detailing - 3.Positioning Notes.flv	2.1 MB
4.Assemblies - 3.Hinge Mates.flv	2.1 MB
2.Sketching - 4.Repair Sketch.flv	1.9 MB
5.Drawings and Detailing - 2.Format Painter.flv	1.8 MB
7.Weldments - 4.End Caps.flv	1.7 MB
3.Parts & Features - 8.Derived Parts.flv	1.5 MB
5.Drawings and Detailing - 5.Dimension Extension Lines.flv	1.5 MB
1.General Enhancements - 8.Measuring.flv	1.5 MB
6.Sheet Metal - 2.Beveled and Chamfered Edges.flv	1.4 MB
7.Weldments - 3.Gussets with Chamfers.flv	1.3 MB
/.../2010 3D Skills/
1.Parts - 07.Extruded Boss.flv	11.2 MB
3.Drawings - 2.Model View.flv	10.6 MB
1.Parts - 03.Arcs and Circles.flv	10.2 MB
3.Drawings - 1.Introducing Drawings.flv	9.6 MB
2.Assemblies - 4.Adding Mates.flv	8.7 MB
1.Parts - 06.Dimensions.flv	8.6 MB
1.Parts - 05.Geometric Relations.flv	8.2 MB
3.Drawings - 6.BilI Of Materials.flv	7.9 MB
1.Parts - 02.Lines.flv	7.3 MB
3.Drawings - 7.Balloons.flv	7.2 MB
3.Drawings - 3.Section View.flv	6.7 MB
1.Parts - 01.The Sketcher.flv	6.4 MB
1.Parts - 09.Convert Entities.flv	5.6 MB
1.Parts - 08.Revolved Boss.flv	4.9 MB
3.Drawings - 5.Dimensions.flv	4.9 MB
1.Parts - 04.Rectangles.flv	4.7 MB
1.Parts - 11.Shell.flv	4.7 MB
2.Assemblies - 3.Inserting Components.flv	4.5 MB
2.Assemblies - 5.Collision Detection.flv	4.5 MB
3.Drawings - 4.Detail View.flv	4.4 MB
2.Assemblies - 2.Starting an Assembly.flv	4.0 MB
1.Parts - 10.Sketches on Faces.flv	3.6 MB
0.Introduction - 1.Introduction To SolidWorks.flv	936.8 KB
2.Assemblies - 1.Introducing Assemblies.flv	857.2 KB
/.../2010 Advanced Assemblies/
3.Assembly Features - 4.Smart Components.flv	11.3 MB
7.Assembly Configurations - 3.Advanced Options.flv	8.6 MB
8.Top Down Assembly Design - 06.Inserting a New Component.flv	6.7 MB
1.Assembly Structure - 1.Creating Sub-Assemblies.flv	6.6 MB
7.Assembly Configurations - 4.Automatic Part Configurations.flv	6.4 MB
6.Troubleshooting Mates - 4.Mate Xpert.flv	6.0 MB
8.Top Down Assembly Design - 09.Removing External References - Part C.flv	5.6 MB
6.Troubleshooting Mates - 5.Replace Mate Entities.flv	5.5 MB
7.Assembly Configurations - 7.SpeedPak.flv	5.4 MB
3.Assembly Features - 5.Belts and Chains.flv	5.4 MB
2.File Management - 2.References.flv	5.2 MB
4.Component Patterns - 1.Linear Patterns.flv	5.2 MB
8.Top Down Assembly Design - 07.Removing External References - Part A.flv	5.0 MB
7.Assembly Configurations - 6.Assembly Design Tables - Part B.flv	4.9 MB
5.Advanced Mate Types - 09.Limit Mate.flv	4.9 MB
2.File Management - 1.File Relationships.flv	4.9 MB
8.Top Down Assembly Design - 11.Virtual Components.flv	4.8 MB
7.Assembly Configurations - 5.Assembly Design Tables - Part A.flv	4.8 MB
2.File Management - 6.Document Revisions - Part B.flv	4.8 MB
8.Top Down Assembly Design - 04.In Context Features - Part A.flv	4.7 MB
8.Top Down Assembly Design - 08.Removing External References - Part B.flv	4.7 MB
2.File Management - 3.Renaming Parts - Save As.flv	4.6 MB
7.Assembly Configurations - 2.Adding Configurations - Part B.flv	4.5 MB
8.Top Down Assembly Design - 02.Edit Part Mode.flv	4.4 MB
4.Component Patterns - 4.Mirroring Components.flv	4.3 MB
5.Advanced Mate Types - 06.Gear Mate.flv	4.3 MB
4.Component Patterns - 3.Feature Driven Patterns.flv	4.1 MB
5.Advanced Mate Types - 02.Width Mate.flv	4.1 MB
5.Advanced Mate Types - 13.Mate Reference Pairs.flv	4.0 MB
3.Assembly Features - 3.Hole Series.flv	3.8 MB
8.Top Down Assembly Design - 03.Component Visibility.flv	3.7 MB
5.Advanced Mate Types - 07.Rack and Pinion Mate.flv	3.6 MB
6.Troubleshooting Mates - 3.Repairing Mate Errors - Part B.flv	3.5 MB
5.Advanced Mate Types - 05.Cam Mate.flv	3.3 MB
6.Troubleshooting Mates - 1.Assembly Mate Errors.flv	3.3 MB
6.Troubleshooting Mates - 2.Repairing Mate Errors - Part A.flv	3.2 MB
8.Top Down Assembly Design - 05.In Context Features - Part B.flv	3.1 MB
2.File Management - 4.Renaming Parts - SolidWorks Explorer.flv	3.1 MB
5.Advanced Mate Types - 11.Mate References.flv	3.0 MB
2.File Management - 7.Reloading and Replacing.flv	3.0 MB
4.Component Patterns - 2.Circular Patterns.flv	2.9 MB
3.Assembly Features - 2.Feature Scope.flv	2.8 MB
7.Assembly Configurations - 1.Adding Configurations - Part A.flv	2.7 MB
8.Top Down Assembly Design - 10.No External References.flv	2.5 MB
5.Advanced Mate Types - 12.Extracting Mate References.flv	2.4 MB
1.Assembly Structure - 2.Flexible Sub-Assemblies.flv	2.4 MB
3.Assembly Features - 1.Assembly Feature.flv	2.3 MB
5.Advanced Mate Types - 08.Screw Mate.flv	2.3 MB
1.Assembly Structure - 4.Folders vs. Sub-Assemblies.flv	2.3 MB
5.Advanced Mate Types - 10.Hinge Mate.flv	2.2 MB
5.Advanced Mate Types - 03.Path Mate.flv	1.9 MB
1.Assembly Structure - 3.Empty Sub-Assemblies.flv	1.8 MB
5.Advanced Mate Types - 01.Symmetric Mate.flv	1.8 MB
1.Assembly Structure - 5.Sub-Assemblies in Drawings.flv	1.7 MB
2.File Management - 5.Document Revisions - Part A.flv	1.6 MB
5.Advanced Mate Types - 04.Linear Coupler Mate.flv	1.5 MB
8.Top Down Assembly Design - 01.Introduction.flv	796.3 KB
/.../2010 Advanced Parts/
03.Sweeps - 9.Threads.flv	12.4 MB
08.Surfacing - 20.Freeforms - Part B.flv	9.4 MB
05.Flex Feature - 2.Flex Feature.flv	8.4 MB
01.Advanced Sketching - 08.3D Sketching with Planes.flv	7.8 MB
07.Core and Cavity - 1.Draft Analysis - Part A.flv	7.2 MB
01.Advanced Sketching - 07.3D Sketching.flv	6.6 MB
10.Weldments - 03.Trim and Extend - Part A.flv	6.3 MB
04.Lofts - 02.The Basic Loft.flv	6.2 MB
07.Core and Cavity - 8.Side Cores - Part A.flv	5.9 MB
03.Sweeps - 6.Profile Orientation.flv	5.9 MB
06.Multibody Parts - 6.Combining Multiple Bodies.flv	5.9 MB
10.Weldments - 04.Trim and Extend - Part B.flv	5.8 MB
06.Multibody Parts - 8.Additional Techniques.flv	5.7 MB
04.Lofts - 05.Start and End Constraints.flv	5.5 MB
06.Multibody Parts - 4.Splitting Bodies - Part B.flv	5.4 MB
10.Weldments - 02.Layout Sketches.flv	5.3 MB
10.Weldments - 01.Introduction.flv	5.3 MB
10.Weldments - 06.Gussets & End Caps.flv	5.3 MB
10.Weldments - 09.Sub-Weldments.flv	5.2 MB
04.Lofts - 06.Guide Curves.flv	5.2 MB
04.Lofts - 07.Profile Geometry.flv	5.0 MB
02.Advanced Fillets - 2.Variable Radius Fillets.flv	5.0 MB
11.Fastening Features - 5.Lip and Groove.flv	4.9 MB
08.Surfacing - 19.Freeforms - Part A.flv	4.8 MB
08.Surfacing - 05.Ruled Surface - Part B.flv	4.7 MB
07.Core and Cavity - 9.Side Cores - Part B.flv	4.6 MB
01.Advanced Sketching - 11.Curve Through XYZ Points.flv	4.5 MB
07.Core and Cavity - 7.Creating the Mold.flv	4.4 MB
05.Flex Feature - 3.Bending.flv	4.4 MB
10.Weldments - 08.Cut Lists - Part B.flv	4.4 MB
02.Advanced Fillets - 1.Fillet Options.flv	4.3 MB
08.Surfacing - 14.Filled Surface.flv	4.3 MB
03.Sweeps - 2.The Basic Sweep.flv	4.3 MB
11.Fastening Features - 3.Snap Groove.flv	4.0 MB
06.Multibody Parts - 9.Positioning Bodies.flv	4.0 MB
08.Surfacing - 13.Surface to Solid.flv	4.0 MB
02.Advanced Fillets - 7.Fillet Xpert.flv	4.0 MB
09.Indent Feature - 1.Indent Feature.flv	4.0 MB
03.Sweeps - 4.Guide Curves.flv	3.9 MB
06.Multibody Parts - 5.Multibody Design Techniques.flv	3.9 MB
01.Advanced Sketching - 09.3D Sketch Planes.flv	3.8 MB
08.Surfacing - 02.Basic Surfaces.flv	3.7 MB
10.Weldments - 05.Plates & Weld Beads.flv	3.7 MB
10.Weldments - 07.Cut Lists - Part A.flv	3.7 MB
08.Surfacing - 07.Knit Surfaces.flv	3.6 MB
11.Fastening Features - 1.Mounting Boss.flv	3.4 MB
10.Weldments - 10.Custom Profiles.flv	3.3 MB
08.Surfacing - 09.Trimming Surfaces - Part B.flv	3.3 MB
05.Flex Feature - 5.Tapering and Stretching.flv	3.2 MB
07.Core and Cavity - 5.Shut-Off Surfaces.flv	3.2 MB
11.Fastening Features - 4.Vent Feature.flv	3.2 MB
04.Lofts - 04.Loft Profiles.flv	3.2 MB
08.Surfacing - 08.Trimming Surfaces - Part A.flv	3.2 MB
03.Sweeps - 3.Path Options.flv	3.1 MB
01.Advanced Sketching - 06.3D Sketching - Intro.flv	3.1 MB
03.Sweeps - 7.Twist.flv	3.0 MB
06.Multibody Parts - 7.Swept Cuts with Bodies.flv	3.0 MB
03.Sweeps - 8.Cutting with Sweeps.flv	3.0 MB
06.Multibody Parts - 1.Introduction.flv	2.9 MB
09.Indent Feature - 2.Using Multiple Tool Bodies.flv	2.8 MB
08.Surfacing - 21.Boundary Surfaces.flv	2.8 MB
03.Sweeps - 5.Multiple Guide Curves.flv	2.8 MB
06.Multibody Parts - 3.Splitting Bodies - Part A.flv	2.7 MB
04.Lofts - 09.Adding Loft Sections.flv	2.7 MB
08.Surfacing - 15.Delete Faces.flv	2.7 MB
01.Advanced Sketching - 15.Intersection Curve.flv	2.6 MB
09.Indent Feature - 3.Multiple Tool Regions.flv	2.5 MB
06.Multibody Parts - 2.Creating Multiple Bodies.flv	2.2 MB
04.Lofts - 08.Centerline.flv	2.2 MB
01.Advanced Sketching - 16.Derived Sketches.flv	2.2 MB
08.Surfacing - 17.Replace Face.flv	2.1 MB
08.Surfacing - 11.Untrimming Surfaces.flv	2.1 MB
11.Fastening Features - 2.Snap Hook.flv	2.1 MB
07.Core and Cavity - 4.Parting Lines.flv	2.0 MB
08.Surfacing - 04.Ruled Surface - Part A.flv	2.0 MB
01.Advanced Sketching - 03.Partial Ellipse.flv	1.9 MB
01.Advanced Sketching - 14.Projected Curve.flv	1.9 MB
01.Advanced Sketching - 04.Parabola.flv	1.9 MB
01.Advanced Sketching - 10.Helixes & Spirals.flv	1.9 MB
07.Core and Cavity - 3.Scale.flv	1.8 MB
04.Lofts - 10.Cutting with a Loft.flv	1.8 MB
01.Advanced Sketching - 12.Composite Curve.flv	1.8 MB
08.Surfacing - 12.Deleting Holes.flv	1.6 MB
01.Advanced Sketching - 02.Ellipse.flv	1.6 MB
05.Flex Feature - 4.Twisting.flv	1.5 MB
04.Lofts - 01.Introduction.flv	1.5 MB
02.Advanced Fillets - 5.Curvature Continuous Fillets.flv	1.4 MB
08.Surfacing - 01.Introduction.flv	1.4 MB
02.Advanced Fillets - 3.Face Fillets.flv	1.4 MB
08.Surfacing - 18.Cutting with Surfaces.flv	1.4 MB
09.Indent Feature - 4.Surfaces and the Cut Option.flv	1.4 MB
07.Core and Cavity - 2.Draft Analysis - Part B.flv	1.4 MB
08.Surfacing - 10.Extending Surfaces.flv	1.3 MB
07.Core and Cavity - 6.Parting Surface.flv	1.2 MB
01.Advanced Sketching - 17.Sketch Xpert.flv	1.2 MB
02.Advanced Fillets - 4.Hold Line Fillets.flv	1.2 MB
03.Sweeps - 1.Introduction.flv	1.1 MB
02.Advanced Fillets - 6.Full Round Fillets.flv	1.1 MB
04.Lofts - 03.Closing a Loft.flv	1.1 MB
01.Advanced Sketching - 05.Splitting Entities.flv	1.1 MB
01.Advanced Sketching - 13.Curve Through Reference Points.flv	1.1 MB
01.Advanced Sketching - 01.Polygon.flv	1.1 MB
08.Surfacing - 03.Planar Surface.flv	1.1 MB
08.Surfacing - 16.Move Face.flv	1.0 MB
08.Surfacing - 06.Offset Surfaces.flv	1.0 MB
05.Flex Feature - 1.Introduction.flv	388.5 KB
/.../2010 Advanced Surfacing/
4.Candle Holder - 17.Scroll on Legs.flv	18.2 MB
3.Detergent Bottle - 18.Remaining Fillets and Thread.flv	15.7 MB
2.Light Bulb - 6.Base Threads.flv	14.7 MB
2.Light Bulb - 3.Fluorescent Tube.flv	12.8 MB
4.Candle Holder - 15.Filleting and Patterning the Ivy.flv	12.0 MB
3.Detergent Bottle - 15.Creating the Label Inset.flv	11.9 MB
4.Candle Holder - 11.Leaf Details.flv	11.8 MB
4.Candle Holder - 08.Thumb Rest Setup.flv	10.4 MB
3.Detergent Bottle - 03.Creating the Front Surface.flv	10.4 MB
3.Detergent Bottle - 07.Making the Handle.flv	9.9 MB
1.Pasta Scoop - 18.Remaining Prongs and Holes.flv	9.9 MB
4.Candle Holder - 10.Leaf Free Form Shape.flv	9.6 MB
3.Detergent Bottle - 11.Blending the Handle Bottom.flv	9.1 MB
2.Light Bulb - 2.Bulb Base.flv	8.1 MB
4.Candle Holder - 14.Wrapping the Ivy.flv	8.0 MB
4.Candle Holder - 09.Completing the Thumb Rest.flv	7.9 MB
3.Detergent Bottle - 10.Blending the Handle Top.flv	7.8 MB
4.Candle Holder - 07.Finger Loop.flv	7.6 MB
1.Pasta Scoop - 24.Mirror and Repair.flv	7.4 MB
4.Candle Holder - 13.Wrapped Ivy Setup.flv	7.3 MB
4.Candle Holder - 16.Decorative Bead Pattern.flv	7.2 MB
3.Detergent Bottle - 05.Making the Back Surface.flv	6.8 MB
4.Candle Holder - 12.Leaf Pattern.flv	6.4 MB
4.Candle Holder - 05.Handle Transition as Solid.flv	5.9 MB
3.Detergent Bottle - 14.Adding the Spout and Fillets.flv	5.6 MB
3.Detergent Bottle - 09.Preparing the Handle Top.flv	5.6 MB
2.Light Bulb - 5.Completing the Tube.flv	5.2 MB
1.Pasta Scoop - 14.Creating the Parting Line Curve.flv	5.2 MB
3.Detergent Bottle - 17.Applying a Multi-thickness Shell.flv	5.2 MB
1.Pasta Scoop - 22.Handle-top Shape.flv	4.8 MB
1.Pasta Scoop - 03.Inserting the Sketch Picture.flv	4.8 MB
2.Light Bulb - 4.Connecting the Tube.flv	4.8 MB
1.Pasta Scoop - 25.Completing the Scoop.flv	4.7 MB
3.Detergent Bottle - 02.Developing a Strategy.flv	4.6 MB
1.Pasta Scoop - 08.Curvature.flv	4.5 MB
1.Pasta Scoop - 19.Thickening the Bowl.flv	4.3 MB
1.Pasta Scoop - 10.Spline Settings.flv	4.3 MB
1.Pasta Scoop - 01.Overview.flv	4.1 MB
1.Pasta Scoop - 06.Spline Handles.flv	4.1 MB
3.Detergent Bottle - 12.Bottle Neck and Bottom.flv	4.1 MB
4.Candle Holder - 04.Sweeping the Handle.flv	4.1 MB
3.Detergent Bottle - 19.Calculating the Volume.flv	4.0 MB
3.Detergent Bottle - 04.Making the Label Surfaces.flv	3.9 MB
3.Detergent Bottle - 08.Blending the Front and Back Faces.flv	3.8 MB
1.Pasta Scoop - 15.The Outer Surface.flv	3.7 MB
1.Pasta Scoop - 17.First Set of Prongs.flv	3.6 MB
4.Candle Holder - 06.Handle Transition as Surface.flv	3.6 MB
1.Pasta Scoop - 20.Adding Fillets.flv	3.6 MB
3.Detergent Bottle - 16.Adding the Dome.flv	3.5 MB
1.Pasta Scoop - 12.Sketching the Top View.flv	3.2 MB
3.Detergent Bottle - 06.Trimming the Surfaces.flv	3.0 MB
1.Pasta Scoop - 16.Separating the Handle.flv	3.0 MB
1.Pasta Scoop - 04.Splines.flv	2.6 MB
1.Pasta Scoop - 23.Handle Top Surface.flv	2.6 MB
1.Pasta Scoop - 02.Using Reference Images.flv	2.4 MB
1.Pasta Scoop - 11.Tracing the Side View.flv	2.3 MB
4.Candle Holder - 02.Revolving the Base.flv	2.2 MB
3.Detergent Bottle - 13.Making the Surface Model into a Solid.flv	2.2 MB
1.Pasta Scoop - 05.Control Points.flv	2.1 MB
1.Pasta Scoop - 21.Handle Profile Shape.flv	2.0 MB
1.Pasta Scoop - 09.Widgets and Tools.flv	1.5 MB
1.Pasta Scoop - 13.Side View of the Parting Line.flv	1.4 MB
4.Candle Holder - 01.Overview.flv	1.0 MB
1.Pasta Scoop - 07.Control Polygon.flv	1.0 MB
4.Candle Holder - 03.Planning the Handle.flv	983.4 KB
3.Detergent Bottle - 01.Overview.flv	782.7 KB
2.Light Bulb - 1.Overview.flv	504.9 KB
/.../2010 AutoCAD to SolidWorks/
2.SolidWorks Parts - 07.Extruded Boss.flv	11.2 MB
4.SolidWorks Drawings - 2.Model View.flv	10.6 MB
2.SolidWorks Parts - 04.Circles & Arcs.flv	10.2 MB
4.SolidWorks Drawings - 1.Introducing Drawings.flv	9.6 MB
3.SolidWorks Assemblies - 4.Adding Mates.flv	8.7 MB
1.AutoCAD to SolidWorks Tools - 10.Blocks and Mechanisms.flv	8.6 MB
2.SolidWorks Parts - 06.Dimensions.flv	8.6 MB
2.SolidWorks Parts - 05.Geometric Relations.flv	8.2 MB
4.SolidWorks Drawings - 6.Bill of Materials.flv	7.9 MB
2.SolidWorks Parts - 02.Lines.flv	7.3 MB
4.SolidWorks Drawings - 7.Balloons.flv	7.2 MB
4.SolidWorks Drawings - 3.Section View.flv	6.7 MB
2.SolidWorks Parts - 01.The Sketcher.flv	6.4 MB
2.SolidWorks Parts - 09.Convert Entities.flv	5.6 MB
1.AutoCAD to SolidWorks Tools - 09.3D Features.flv	5.1 MB
2.SolidWorks Parts - 08.Revolved Boss.flv	4.9 MB
1.AutoCAD to SolidWorks Tools - 02.What is SolidWorks_.flv	4.9 MB
4.SolidWorks Drawings - 5.Dimensions.flv	4.9 MB
2.SolidWorks Parts - 03.Rectangles.flv	4.7 MB
2.SolidWorks Parts - 11.Shell.flv	4.7 MB
3.SolidWorks Assemblies - 3.Inserting Components.flv	4.5 MB
3.SolidWorks Assemblies - 5.Collision Detection.flv	4.5 MB
4.SolidWorks Drawings - 4.Detail View.flv	4.4 MB
3.SolidWorks Assemblies - 2.Starting an Assembly.flv	4.0 MB
2.SolidWorks Parts - 10.Sketches on Faces.flv	3.6 MB
1.AutoCAD to SolidWorks Tools - 08.Orienting and Aligning Sketches.flv	3.3 MB
1.AutoCAD to SolidWorks Tools - 05.Import to Drawing.flv	2.9 MB
1.AutoCAD to SolidWorks Tools - 06.Embedded AutoCAD Drawing.flv	2.8 MB
1.AutoCAD to SolidWorks Tools - 07.Import to Part.flv	1.7 MB
1.AutoCAD to SolidWorks Tools - 03.Import Options.flv	1.4 MB
3.SolidWorks Assemblies - 1.Introducing Assemblies.flv	857.2 KB
1.AutoCAD to SolidWorks Tools - 04.DWG Editor - Overview.flv	782.5 KB
1.AutoCAD to SolidWorks Tools - 01.Introduction.flv	708.9 KB
/.../2010 Core Concepts/
5.Parts - 09.Part Exercise I B.flv	7.6 MB
6.Assemblies - 13.Assembly Exercise I.flv	7.4 MB
5.Parts - 15.Part Exercise II C.flv	7.4 MB
6.Assemblies - 23.Assembly Appearances.flv	6.9 MB
5.Parts - 19.Part Exercise III C.flv	6.6 MB
5.Parts - 10.Part Exercise I C.flv	6.4 MB
3.Sketched Features - 2.Extruded Boss.flv	6.4 MB
2.The Sketcher - 04.Circles & Arcs.flv	6.2 MB
5.Parts - 04.Design Intent.flv	6.1 MB
5.Parts - 07.Appearances and Scenes.flv	5.7 MB
4.Applied Features - 02.Fillets.flv	5.5 MB
5.Parts - 06.Symmetry B.flv	5.5 MB
5.Parts - 13.Part Exercise II A.flv	5.5 MB
2.The Sketcher - 05.Automatic Relations.flv	5.3 MB
5.Parts - 11.Editing Parts.flv	5.2 MB
6.Assemblies - 06.Adding Mates.flv	5.1 MB
1.Introduction - 2.SolidWorks Overview.flv	5.1 MB
3.Sketched Features - 7.Sweep.flv	5.0 MB
5.Parts - 18.Part Exercise III B.flv	4.9 MB
3.Sketched Features - 8.Loft.flv	4.9 MB
2.The Sketcher - 07.Dimensions.flv	4.9 MB
1.Introduction - 5.View Manipulation.flv	4.7 MB
5.Parts - 05.Symmetry A.flv	4.7 MB
2.The Sketcher - 09.Over Defined Sketches.flv	4.5 MB
2.The Sketcher - 06.Geometric Relations.flv	4.4 MB
5.Parts - 14.Part Exercise II B.flv	4.4 MB
5.Parts - 29.Design Tables - Feat..flv	4.2 MB
3.Sketched Features - 9.Ribs.flv	4.1 MB
2.The Sketcher - 02.Lines.flv	4.0 MB
4.Applied Features - 10.Curve Driven Patterns.flv	4.0 MB
6.Assemblies - 18.Assembly Exercise II B.flv	4.0 MB
6.Assemblies - 17.Assembly Exercise II A.flv	4.0 MB
4.Applied Features - 14.Hole Wizard.flv	3.8 MB
5.Parts - 24.Configurations - Dims.flv	3.8 MB
6.Assemblies - 19.Exploding Assemblies.flv	3.6 MB
2.The Sketcher - 10.Sketch Fillets.flv	3.6 MB
1.Introduction - 3.SolidWorks Interface.flv	3.6 MB
2.The Sketcher - 01.The Sketcher.flv	3.5 MB
4.Applied Features - 13.Planes II.flv	3.5 MB
4.Applied Features - 03.Chamfers.flv	3.4 MB
4.Applied Features - 11.Fill Patterns.flv	3.3 MB
5.Parts - 25.Configurations - Feat..flv	3.3 MB
6.Assemblies - 14.Interference Detection.flv	3.3 MB
5.Parts - 28.Design Tables - Create.flv	3.1 MB
6.Assemblies - 20.Assembly Exercise III A.flv	3.1 MB
5.Parts - 12.Instant 3D.flv	3.1 MB
2.The Sketcher - 14.Convert Entities.flv	3.1 MB
3.Sketched Features - 5.Revolved Boss.flv	3.0 MB
5.Parts - 23.Configurations - Intro.flv	2.9 MB
6.Assemblies - 05.Positioning Parts.flv	2.9 MB
4.Applied Features - 04.Shell.flv	2.8 MB
5.Parts - 27.Design Tables - Dims.flv	2.8 MB
1.Introduction - 4.Task Pane Resources.flv	2.8 MB
2.The Sketcher - 03.Rectangles.flv	2.7 MB
6.Assemblies - 22.Assembly BOM.flv	2.6 MB
5.Parts - 02.Starting a Part.flv	2.6 MB
6.Assemblies - 11.Smart Mates.flv	2.6 MB
2.The Sketcher - 08.Fully Defined Sketches.flv	2.6 MB
5.Parts - 22.Parent Child Relations.flv	2.6 MB
5.Parts - 16.Part Exercise II D.flv	2.6 MB
4.Applied Features - 08.Linear Patterns.flv	2.5 MB
6.Assemblies - 04.Inserting Components.flv	2.5 MB
6.Assemblies - 12.Multiple Mate Mode.flv	2.5 MB
4.Applied Features - 05.3D Mirroring.flv	2.5 MB
4.Applied Features - 06.Planes I.flv	2.5 MB
6.Assemblies - 16.Collision Detection.flv	2.4 MB
6.Assemblies - 03.Starting an Assembly.flv	2.4 MB
6.Assemblies - 21.Assembly Exercise III B.flv	2.4 MB
2.The Sketcher - 15.Sketches on Faces.flv	2.4 MB
6.Assemblies - 07.Coincident Mate.flv	2.3 MB
5.Parts - 08.Part Exercise I A.flv	2.2 MB
5.Parts - 17.Part Exercise III A.flv	2.2 MB
2.The Sketcher - 13.Trim Tools.flv	2.0 MB
5.Parts - 20.Part Exercise III D.flv	1.9 MB
5.Parts - 03.Picking a Plane.flv	1.9 MB
6.Assemblies - 15.Dynamic Clearance.flv	1.8 MB
3.Sketched Features - 4.Extruded Cut.flv	1.7 MB
4.Applied Features - 09.Circular Patterns.flv	1.5 MB
4.Applied Features - 12.Creating Axes.flv	1.5 MB
5.Parts - 21.Feature Suppression.flv	1.5 MB
3.Sketched Features - 3.Contours & Thin Features.flv	1.3 MB
2.The Sketcher - 11.Sketch Mirroring.flv	1.2 MB
5.Parts - 26.Design Tables - Intro.flv	1.2 MB
2.The Sketcher - 12.Offset Entities.flv	1.1 MB
4.Applied Features - 07.Mirroring Bodies.flv	1.0 MB
6.Assemblies - 10.Tangent Mate.flv	969.6 KB
5.Parts - 01.Introducing Parts.flv	903.4 KB
3.Sketched Features - 6.Revolved Cut.flv	837.9 KB
6.Assemblies - 08.Distance Mate.flv	768.9 KB
1.Introduction - 1.Course Introduction.flv	739.4 KB
6.Assemblies - 09.Concentric Mate.flv	534.3 KB
6.Assemblies - 02.Introducing Assemblies.flv	439.7 KB
3.Sketched Features - 1.Overview.flv	315.6 KB
6.Assemblies - 01.Overview.flv	296.5 KB
4.Applied Features - 01.Overview.flv	147.1 KB
/SolidWorks/SolidWorks 2010/2010 Drawings/
2010 Drawings - 03.Model View.flv	5.9 MB
2010 Drawings - 02.Introducing Drawings.flv	5.3 MB
2010 Drawings - 20.Note Annotations.flv	4.7 MB
2010 Drawings - 15.Driving Dimensions.flv	4.6 MB
2010 Drawings - 24.Balloons.flv	4.3 MB
2010 Drawings - 25.Custom Templates.flv	4.3 MB
2010 Drawings - 22.BOMs - Advanced Options.flv	4.1 MB
2010 Drawings - 23.Linking BOMs.flv	4.1 MB
2010 Drawings - 21.Bill of Materials.flv	4.1 MB
2010 Drawings - 26.Custom Sheet Formats.flv	4.0 MB
2010 Drawings - 16.Driven Dimensions.flv	3.8 MB
2010 Drawings - 06.Section View.flv	3.7 MB
2010 Drawings - 19.Center Marks.flv	2.8 MB
2010 Drawings - 08.Detail View.flv	2.6 MB
2010 Drawings - 14.Dimensions.flv	2.5 MB
2010 Drawings - 07.Assembly Section View.flv	2.1 MB
2010 Drawings - 13.Scale.flv	2.0 MB
2010 Drawings - 10.Exploded View.flv	1.6 MB
2010 Drawings - 17.Ordinate Dimensions.flv	1.5 MB
2010 Drawings - 09.Broken View.flv	1.3 MB
2010 Drawings - 11.Display Options.flv	1.3 MB
2010 Drawings - 12.View Alignment.flv	1.3 MB
2010 Drawings - 05.Auxiliary View.flv	1.3 MB
2010 Drawings - 18.Baseline Dimensions.flv	1.2 MB
2010 Drawings - 04.Projected View.flv	840.2 KB
2010 Drawings - 01.Overview.flv	227.1 KB
/SolidWorks/SolidWorks 2010/2010 DriveWorksXpress/
1.DriveWorksXpress - 5.Creating Rules - Dimensions.flv	6.1 MB
1.DriveWorksXpress - 6.Creating Rules - Features & Properties.flv	5.2 MB
1.DriveWorksXpress - 4.Creating the Input Form.flv	4.9 MB
1.DriveWorksXpress - 3.Capturing SolidWorks Data.flv	4.9 MB
1.DriveWorksXpress - 7.Creating New Variants.flv	4.2 MB
1.DriveWorksXpress - 2.Starting DriveWorksXpress.flv	2.4 MB
1.DriveWorksXpress - 1.Introduction.flv	2.3 MB
/.../2010 PhotoWorks Essentials/
5.Lighting Control - 7.Spot Light.flv	8.2 MB
4.Scenes - 5.Adding Depth.flv	8.2 MB
7.PhotoView 360 - 08.Depth of Field Example - Part I.flv	7.6 MB
7.PhotoView 360 - 02.Environments and Camera Settings.flv	5.7 MB
2.Appearances - 6.Advanced Mapping Options.flv	5.5 MB
4.Scenes - 3.Rooms.flv	4.9 MB
5.Lighting Control - 9.Lighting Scheme.flv	4.8 MB
5.Lighting Control - 8.Caustic Lighting.flv	4.8 MB
7.PhotoView 360 - 06.Using Standard and Saved Views.flv	4.6 MB
3.Decals - 5.Mapping Decals.flv	4.5 MB
7.PhotoView 360 - 09.Depth of Field Example - Part II.flv	4.3 MB
5.Lighting Control - 6.Point Light.flv	4.2 MB
2.Appearances - 7.Surface Properties.flv	4.1 MB
4.Scenes - 2.Scene Manager.flv	4.0 MB
6.Rendered Output - 3.Printing From PhotoWorks.flv	3.9 MB
5.Lighting Control - 3.Ambient Light.flv	3.8 MB
1.Getting Started - 3.Interface.flv	3.7 MB
4.Scenes - 6.Environment.flv	3.6 MB
2.Appearances - 5.Textural Appearances.flv	3.6 MB
7.PhotoView 360 - 05.Rendering the Image.flv	3.4 MB
1.Getting Started - 8.Rendering.flv	3.4 MB
7.PhotoView 360 - 03.Applying Appearances.flv	3.4 MB
2.Appearances - 2.Appearances Part I.flv	3.3 MB
2.Appearances - 3.Appearances Part II.flv	3.1 MB
3.Decals - 3.Creating Decals.flv	3.0 MB
6.Rendered Output - 2.Anti-Aliasing.flv	2.9 MB
5.Lighting Control - 5.Directional Light Part II.flv	2.9 MB
1.Getting Started - 5.Appearance Editor.flv	2.8 MB
5.Lighting Control - 4.Directional Light Part I.flv	2.8 MB
7.PhotoView 360 - 04.Orienting the Model.flv	2.8 MB
4.Scenes - 4.Background.flv	2.7 MB
1.Getting Started - 4.Render Wizard.flv	2.6 MB
3.Decals - 7.Masking.flv	2.6 MB
6.Rendered Output - 4.Render To File.flv	2.5 MB
1.Getting Started - 6.Scene Editor.flv	2.3 MB
7.PhotoView 360 - 01.Introduction To PhotoView 360.flv	2.3 MB
4.Scenes - 1.Introduction.flv	2.2 MB
5.Lighting Control - 2.SolidWorks vs. PhotoWorks.flv	2.2 MB
3.Decals - 4.Applying Decals.flv	2.2 MB
1.Getting Started - 7.Preview Window.flv	2.2 MB
1.Getting Started - 1.Introduction.flv	2.0 MB
7.PhotoView 360 - 07.Bloom.flv	1.8 MB
2.Appearances - 8.Appearance Illumination.flv	1.8 MB
3.Decals - 6.Decal Illumination.flv	1.7 MB
2.Appearances - 4.Copy and Paste Options.flv	1.6 MB
5.Lighting Control - 1.Introduction.flv	1.5 MB
1.Getting Started - 2.Activating Photoworks.flv	1.3 MB
7.PhotoView 360 - 10.Gallery.flv	1.2 MB
2.Appearances - 1.Introduction.flv	1.1 MB
3.Decals - 2.Decal Editor.flv	885.3 KB
3.Decals - 1.Introduction.flv	696.7 KB
6.Rendered Output - 1.Introduction.flv	653.1 KB
/.../2010 Sheet Metal/
2010 Sheet Metal - 27.Convert to Sheet Metal.flv	6.6 MB
2010 Sheet Metal - 24.Convert to Sheet Metal.flv	6.6 MB
2010 Sheet Metal - 23.Creating New Forming Tools.flv	6.5 MB
2010 Sheet Metal - 22.Modifying Forming Tools.flv	6.2 MB
2010 Sheet Metal - 11.Miter Flange.flv	5.8 MB
2010 Sheet Metal - 02.Base Flange - Part A.flv	4.8 MB
2010 Sheet Metal - 09.Edge Flange - Part B.flv	4.6 MB
2010 Sheet Metal - 05.Bend Tables.flv	4.0 MB
2010 Sheet Metal - 06.Flat Pattern Options.flv	3.9 MB
2010 Sheet Metal - 14.Cuts Across Bends.flv	3.9 MB
2010 Sheet Metal - 08.Edge Flange - Part A.flv	3.7 MB
2010 Sheet Metal - 25.Rip Feature.flv	3.6 MB
2010 Sheet Metal - 28.Cones and Cylinders.flv	3.5 MB
2010 Sheet Metal - 31.Cross Breaks.flv	3.5 MB
2010 Sheet Metal - 30.Sheet Metal Drawings.flv	3.4 MB
2010 Sheet Metal - 15.Closed Corner.flv	3.3 MB
2010 Sheet Metal - 26.Insert Bends.flv	3.2 MB
2010 Sheet Metal - 07.Corner Trim.flv	3.1 MB
2010 Sheet Metal - 13.Sheet Metal Cuts.flv	2.9 MB
2010 Sheet Metal - 18.Jog.flv	2.8 MB
2010 Sheet Metal - 03.Base Flange - Part B.flv	2.8 MB
2010 Sheet Metal - 19.Hem.flv	2.3 MB
2010 Sheet Metal - 17.Sketched Bend.flv	2.3 MB
2010 Sheet Metal - 29.Lofted Bends.flv	2.2 MB
2010 Sheet Metal - 21.Forming Tools.flv	2.2 MB
2010 Sheet Metal - 04.Bend Allowance.flv	1.9 MB
2010 Sheet Metal - 10.Edge Flange - Part C.flv	1.8 MB
2010 Sheet Metal - 20.Design Library Cuts.flv	1.4 MB
2010 Sheet Metal - 12.Tab.flv	1.1 MB
2010 Sheet Metal - 16.Break Corner.flv	1.1 MB
2010 Sheet Metal - 01.Introduction.flv	1.0 MB
/SolidWorks/SolidWorks 2010/2010 SimulationXpress/
2.Exercises - 3.Exercise II - Pipe Reducer.flv	23.9 MB
2.Exercises - 2.Exercise I - Crank Shaft.flv	17.9 MB
1.Simulation - 09.Stress and Displacement.flv	11.6 MB
1.Simulation - 06.Applying Loads.flv	10.7 MB
1.Simulation - 12.Optimizing a Design.flv	10.7 MB
1.Simulation - 05.Applying Fixtures.flv	9.2 MB
1.Simulation - 08.Running the Simulation.flv	7.1 MB
1.Simulation - 10.Factor of Safety.flv	6.1 MB
3.Appendix - 2.Split Line.flv	4.7 MB
1.Simulation - 02.Assumptions.flv	4.6 MB
3.Appendix - 1.Custom Materials.flv	4.4 MB
1.Simulation - 07.Applying a Material.flv	4.2 MB
1.Simulation - 03.Starting an Analysis.flv	4.1 MB
1.Simulation - 11.Output and Reports.flv	4.1 MB
1.Simulation - 04.Units.flv	2.6 MB
1.Simulation - 01.Overview.flv	2.2 MB
1.Simulation - 13.Summary.flv	1.2 MB
2.Exercises - 1.Overview.flv	720.8 KB
/.../2010 SolidWorks Certification/
3.Advanced Part Model - 13.Adding Fillets.flv	12.0 MB
4.Configurations & Part Modification - 5.Part Modification Exercise.flv	12.0 MB
6.CSWP Assembly Model - 18.Other Possible Assembly Question Types.flv	8.8 MB
2.Part Model with Equations - 2.The Central Cylinder.flv	8.2 MB
6.CSWP Assembly Model - 02.Modeling the First Component.flv	8.1 MB
6.CSWP Assembly Model - 14.Rotor In-context Relations 3.flv	8.0 MB
2.Part Model with Equations - 3.The Top Fork.flv	7.8 MB
3.Advanced Part Model - 11.The Top Boss.flv	7.6 MB
5.CSWA Assembly Model - 5.Mating the Remaining Components.flv	7.5 MB
3.Advanced Part Model - 06.The First Screw Lug.flv	7.3 MB
3.Advanced Part Model - 09.The Rib Structure.flv	7.2 MB
6.CSWP Assembly Model - 17.Simulate Motion.flv	6.9 MB
2.Part Model with Equations - 4.The Lower Fork.flv	6.7 MB
6.CSWP Assembly Model - 13.Rotor In-context Relations 2.flv	6.0 MB
3.Advanced Part Model - 07.The Screw Lug Pattern.flv	5.8 MB
3.Advanced Part Model - 04.The Cylinder and Cone.flv	5.4 MB
3.Advanced Part Model - 10.The Foot Pads.flv	5.2 MB
5.CSWA Assembly Model - 2.Modeling the Parts.flv	4.9 MB
3.Advanced Part Model - 08.The Base Plate.flv	4.5 MB
1.SolidWorks Certification - 07.Purchasing and Setting up the Exam.flv	4.4 MB
5.CSWA Assembly Model - 6.Answering the Question.flv	4.1 MB
1.SolidWorks Certification - 09.Test Taking Strategy.flv	3.9 MB
6.CSWP Assembly Model - 11.Modeling the Rotor Component.flv	3.9 MB
2.Part Model with Equations - 6.Answering the Question.flv	3.8 MB
3.Advanced Part Model - 03.Where to Begin.flv	3.7 MB
6.CSWP Assembly Model - 16.Further Testing of In-context Relations.flv	3.7 MB
4.Configurations & Part Modification - 3.Adding and Modifying Configurations.flv	3.7 MB
3.Advanced Part Model - 12.The Tapped Holes.flv	3.7 MB
3.Advanced Part Model - 14.Answering the Question.flv	3.5 MB
5.CSWA Assembly Model - 3.Mating the First Part.flv	3.4 MB
3.Advanced Part Model - 05.The Rectangular Flange.flv	3.3 MB
3.Advanced Part Model - 02.Developing a Strategy.flv	3.3 MB
5.CSWA Assembly Model - 4.Using SmartMates.flv	3.2 MB
6.CSWP Assembly Model - 10.Making a Change to the Assembly.flv	3.0 MB
6.CSWP Assembly Model - 09.Adding the Second Slider.flv	2.9 MB
1.SolidWorks Certification - 04.What is the CSWP_.flv	2.9 MB
2.Part Model with Equations - 5.Adding Fillets.flv	2.9 MB
1.SolidWorks Certification - 10.Modeling Question Preview.flv	2.8 MB
6.CSWP Assembly Model - 15.Testing In-context Relations.flv	2.8 MB
6.CSWP Assembly Model - 03.Starting the Assembly.flv	2.8 MB
1.SolidWorks Certification - 03.What is the CSWA_.flv	2.6 MB
5.CSWA Assembly Model - 1.Problem Overview.flv	2.6 MB
6.CSWP Assembly Model - 07.Mating the First Slider.flv	2.6 MB
6.CSWP Assembly Model - 08.Slider In-context Relations.flv	2.5 MB
2.Part Model with Equations - 7.Updating the Geometry.flv	2.3 MB
1.SolidWorks Certification - 01.Why Get Certified_.flv	2.3 MB
3.Advanced Part Model - 01.Problem Overview.flv	2.1 MB
6.CSWP Assembly Model - 05.In-context Considerations.flv	2.0 MB
2.Part Model with Equations - 1.Where to Begin.flv	1.9 MB
1.SolidWorks Certification - 02.Preparing for the Exam.flv	1.8 MB
6.CSWP Assembly Model - 12.Rotor In-context Relation 1.flv	1.8 MB
4.Configurations & Part Modification - 4.Part Modification Question.flv	1.8 MB
1.SolidWorks Certification - 06.SolidWorks Versions.flv	1.7 MB
6.CSWP Assembly Model - 04.Making Changes to the Model.flv	1.5 MB
4.Configurations & Part Modification - 2.Configurations Question.flv	1.3 MB
7.CSWA Multiple Choice Questions - 01.Multiple Choice Section Overview.flv	1.2 MB
7.CSWA Multiple Choice Questions - 16.Predefined View.flv	984.9 KB
7.CSWA Multiple Choice Questions - 10.Relative to Model.flv	942.8 KB
6.CSWP Assembly Model - 01.Problem Overview.flv	933.3 KB
7.CSWA Multiple Choice Questions - 06.Partial Section.flv	912.1 KB
7.CSWA Multiple Choice Questions - 02.Model View.flv	813.8 KB
6.CSWP Assembly Model - 19.Final Comments.flv	804.1 KB
7.CSWA Multiple Choice Questions - 03.Projected View.flv	786.6 KB
7.CSWA Multiple Choice Questions - 15.Empty View.flv	727.4 KB
4.Configurations & Part Modification - 1.Configurations Intro.flv	710.0 KB
7.CSWA Multiple Choice Questions - 07.Aligned Section.flv	694.5 KB
7.CSWA Multiple Choice Questions - 05.Section View.flv	664.2 KB
1.SolidWorks Certification - 05.Other Certifications.flv	577.1 KB
7.CSWA Multiple Choice Questions - 14.Alternate Position View.flv	447.3 KB
1.SolidWorks Certification - 08.When You Pass the Exam.flv	435.1 KB
7.CSWA Multiple Choice Questions - 08.Broken Out Section.flv	435.0 KB
6.CSWP Assembly Model - 06.Modeling the Slider.flv	397.7 KB
8.Conclusion - 1.Goodbye.flv	349.0 KB
7.CSWA Multiple Choice Questions - 13.Cropped View.flv	332.7 KB
7.CSWA Multiple Choice Questions - 04.Auxiliary View.flv	317.6 KB
7.CSWA Multiple Choice Questions - 09.Detail View.flv	310.6 KB
7.CSWA Multiple Choice Questions - 11.Standard 3 View.flv	251.2 KB
7.CSWA Multiple Choice Questions - 12.Break View.flv	248.8 KB
/.../2010 SolidWorks Routing/
4.Electrical Routes - 07.Start and Add to Route.flv	8.4 MB
3.Piping Routes - 09.P&ID data and import.flv	7.8 MB
4.Electrical Routes - 17.From and To Lists and Guidelines.flv	7.8 MB
5.Electrical Conduits - 3.Electrical Conduit Data.flv	7.3 MB
6.Creating Route Components - 8.Custom Elbows - Setup.flv	7.3 MB
4.Electrical Routes - 02.Using Standard Cables.flv	6.6 MB
5.Electrical Conduits - 4.Flexible Electrical Conduit.flv	6.6 MB
6.Creating Route Components - 5.The Component Wizard.flv	6.2 MB
6.Creating Route Components - 7.Custom Pipe Tube - Design Tables.flv	6.2 MB
6.Creating Route Components - 9.Custom Elbows - Design Tables.flv	6.0 MB
6.Creating Route Components - 6.Custom Pipe Tube - Setup.flv	6.0 MB
4.Electrical Routes - 10.Routing through Clips.flv	5.8 MB
1.Routing Basics - 06.Start a Route at a Point.flv	5.3 MB
4.Electrical Routes - 05.Defining Wires.flv	5.1 MB
2.Tube Routes - 2.Basic Tube Route.flv	5.0 MB
3.Piping Routes - 02.Basic Pipe Route.flv	5.0 MB
4.Electrical Routes - 03.Creating Standard Cables.flv	4.8 MB
5.Electrical Conduits - 2.Creating a Conduit Route.flv	4.6 MB
4.Electrical Routes - 18.Component Reference Designators.flv	4.6 MB
7.Drawings - 04.Electrical - Drawings.flv	4.6 MB
4.Electrical Routes - 16.Cable and Wire Library.flv	4.2 MB
3.Piping Routes - 04.Adding Fittings.flv	4.1 MB
4.Electrical Routes - 15.Component Library.flv	4.0 MB
6.Creating Route Components - 2.Creating C-Points.flv	3.7 MB
1.Routing Basics - 03.Routing Components.flv	3.7 MB
4.Electrical Routes - 13.Virtual Clips.flv	3.7 MB
1.Routing Basics - 08.Adding Components to Routes.flv	3.6 MB
4.Electrical Routes - 04.Creating Custom Cables.flv	3.6 MB
2.Tube Routes - 5.Editing Tube Routes.flv	3.6 MB
3.Piping Routes - 03.Alternate Elbows.flv	3.4 MB
2.Tube Routes - 3.Auto Route.flv	3.4 MB
3.Piping Routes - 08.Pipe Coverings.flv	3.3 MB
7.Drawings - 06.Electrical - Tables.flv	3.2 MB
7.Drawings - 10.Electrical Conduit.flv	3.1 MB
1.Routing Basics - 10.Routing Settings.flv	3.1 MB
1.Routing Basics - 02.Routing Overview.flv	3.0 MB
1.Routing Basics - 04.Start a Route by Drag and Drop.flv	2.9 MB
7.Drawings - 02.Tubing Drawings.flv	2.9 MB
4.Electrical Routes - 09.Inserting Clips.flv	2.8 MB
1.Routing Basics - 07.Start a Route from Existing Components.flv	2.7 MB
4.Electrical Routes - 11.Editing Route with Clips.flv	2.5 MB
1.Routing Basics - 05.End a Route by Drag and Drop.flv	2.4 MB
7.Drawings - 05.Electrical - Rerouting Drawings.flv	2.4 MB
3.Piping Routes - 10.Exporting Route Data.flv	2.4 MB
6.Creating Route Components - 3.Creating R-Points.flv	2.1 MB
7.Drawings - 03.Piping Drawings.flv	2.0 MB
3.Piping Routes - 06.Pipe Penetration.flv	1.9 MB
7.Drawings - 08.Coverings.flv	1.9 MB
1.Routing Basics - 01.Routing Introduction.flv	1.7 MB
1.Routing Basics - 09.C-Points.flv	1.7 MB
5.Electrical Conduits - 1.Introduction to Conduits.flv	1.7 MB
4.Electrical Routes - 14.Create Route from Electrical Data.flv	1.7 MB
6.Creating Route Components - 4.The Design Library.flv	1.7 MB
7.Drawings - 01.Drawings Intro.flv	1.6 MB
3.Piping Routes - 07.Pipe Reducers.flv	1.5 MB
4.Electrical Routes - 08.Clips Overview.flv	1.5 MB
4.Electrical Routes - 06.Other Methods of Creating Routes.flv	1.4 MB
2.Tube Routes - 4.Repair Route.flv	1.4 MB
2.Tube Routes - 6.Editing Tube Diameter.flv	1.3 MB
3.Piping Routes - 05.Editing Pipe Routes.flv	1.3 MB
4.Electrical Routes - 12.Rotate Clips.flv	1.1 MB
4.Electrical Routes - 01.Electrical Overview.flv	962.9 KB
7.Drawings - 09.Miscellaneous Parts.flv	930.8 KB
6.Creating Route Components - 1.Route Components.flv	895.5 KB
7.Drawings - 07.Additional BOM Information.flv	509.0 KB
3.Piping Routes - 01.Introduction to Piping.flv	504.1 KB
2.Tube Routes - 1.Introduction to Tubing.flv	278.2 KB
/.../2010 SolidWorks Simulation/
03.Meshing - 10.Mesh Refinement.flv	19.7 MB
03.Meshing - 05.Mid-Surfaces & Shell Alignment.flv	16.6 MB
03.Meshing - 02.Solid vs. Shell Mesh.flv	10.0 MB
10.Adaptive Methods - 3.The H-Adaptive Method.flv	9.7 MB
04.Beam Analysis - 3.Truss Analysis.flv	8.7 MB
03.Meshing - 11.Meshing Tips.flv	8.6 MB
11.Temperature Load - 3.Soft Spring and Inertial Relief.flv	8.3 MB
11.Temperature Load - 2.Temperature Load.flv	8.3 MB
08.Using Connectors - 6.Bolt Connector.flv	8.3 MB
03.Meshing - 08.Mixed Shell Solid Mesh.flv	7.8 MB
03.Meshing - 09.Simplifying Geometry.flv	7.6 MB
02.Static Analysis of a Part - 13.Results_ Displacement.flv	7.3 MB
10.Adaptive Methods - 4.The P-Adaptive Method.flv	6.9 MB
15.User Libraries - 1.Material Libraries.flv	6.9 MB
08.Using Connectors - 5.Spring Connector.flv	6.8 MB
05.Static Analysis of an Assembly - 4.Refining Contact Conditions.flv	6.7 MB
05.Static Analysis of an Assembly - 5.Processing and Results.flv	6.7 MB
04.Beam Analysis - 2.Weldment Analysis Results.flv	6.7 MB
02.Static Analysis of a Part - 09.Results_ Stress Plot.flv	6.3 MB
03.Meshing - 03.Sheet Metal Analysis (Using Shell Mesh).flv	6.3 MB
09.Using Design Scenarios - 2.Setup and Parameters.flv	6.1 MB
08.Using Connectors - 7.Spot Weld.flv	6.0 MB
06.Shrink Fit Analysis - 3.Shrink Fit Results.flv	5.7 MB
05.Static Analysis of an Assembly - 2.Assembly Analysis Setup.flv	5.5 MB
04.Beam Analysis - 1.Weldment Analysis Setup.flv	5.4 MB
08.Using Connectors - 4.Link Connector.flv	5.4 MB
15.User Libraries - 2.Analysis Libraries.flv	5.3 MB
03.Meshing - 04.Meshing Options.flv	5.3 MB
02.Static Analysis of a Part - 05.Operating Environment_ Fixtures.flv	5.2 MB
02.Static Analysis of a Part - 07.Processing.flv	5.0 MB
07.Large Displacement Analysis - 3.Large Displacement Results.flv	4.9 MB
02.Static Analysis of a Part - 12.Results_ Iso Clipping.flv	4.9 MB
09.Using Design Scenarios - 3.Defining Design Scenarios.flv	4.8 MB
02.Static Analysis of a Part - 15.Results_ Factor of Safety Plot.flv	4.8 MB
03.Meshing - 07.Shell Analysis Results.flv	4.8 MB
09.Using Design Scenarios - 4.Design Scenario Results.flv	4.7 MB
08.Using Connectors - 2.Rigid Connector.flv	4.7 MB
02.Static Analysis of a Part - 10.Results_ Adding Plots.flv	4.6 MB
02.Static Analysis of a Part - 11.Results_ Section Clipping.flv	4.6 MB
14.Fixtures_ A Reference - 9.Bearing Fixture.flv	4.4 MB
08.Using Connectors - 3.Pin Connector.flv	4.3 MB
06.Shrink Fit Analysis - 2.Setting Up a Shrink Fit Study.flv	4.1 MB
12.Personalization Options - 5.Plot Options.flv	4.1 MB
07.Large Displacement Analysis - 2.Large Displacement Setup.flv	3.8 MB
03.Meshing - 06.Using Multiple Studies.flv	3.6 MB
13.External Loads _ A Reference - 5.Remote Load.flv	3.6 MB
05.Static Analysis of an Assembly - 3.Creating Contact Conditions.flv	3.5 MB
15.User Libraries - 3.Using Library Items.flv	3.3 MB
12.Personalization Options - 1.System Options.flv	3.2 MB
13.External Loads _ A Reference - 2.Force.flv	3.1 MB
12.Personalization Options - 3.Mesh Options.flv	3.1 MB
12.Personalization Options - 4.Results Options.flv	3.0 MB
02.Static Analysis of a Part - 06.Operating Environment_ External Loads.flv	2.9 MB
12.Personalization Options - 2.Units and Symbol Display.flv	2.8 MB
14.Fixtures_ A Reference - 5.Use Reference Geometry.flv	2.7 MB
01.Introduction - 2.Design Validation.flv	2.7 MB
02.Static Analysis of a Part - 04.Creating a Study.flv	2.5 MB
14.Fixtures_ A Reference - 4.Symmetry.flv	2.5 MB
13.External Loads _ A Reference - 6.Bearing Load.flv	2.4 MB
10.Adaptive Methods - 2.Standard Adaptive Method.flv	2.4 MB
01.Introduction - 3.Assumptions.flv	2.1 MB
13.External Loads _ A Reference - 1.Pressure.flv	2.1 MB
07.Large Displacement Analysis - 1.Large Displacement Overview.flv	2.0 MB
02.Static Analysis of a Part - 03.Analysis Setup.flv	2.0 MB
02.Static Analysis of a Part - 14.Results_ Factor of Safety.flv	2.0 MB
08.Using Connectors - 1.Connectors Overview.flv	1.9 MB
10.Adaptive Methods - 1.Adaptive Methods Overview.flv	1.8 MB
02.Static Analysis of a Part - 02.Activating Simulation.flv	1.7 MB
14.Fixtures_ A Reference - 6.On Flat Face.flv	1.7 MB
13.External Loads _ A Reference - 4.Centrifugal Load.flv	1.4 MB
14.Fixtures_ A Reference - 2.Roller Sliding.flv	1.2 MB
14.Fixtures_ A Reference - 7.On Cylindrical Face.flv	1.2 MB
14.Fixtures_ A Reference - 1.Fixed Geometry.flv	1.2 MB
14.Fixtures_ A Reference - 8.On Spherical Face.flv	1.1 MB
02.Static Analysis of a Part - 08.Results_ Overview.flv	1.1 MB
03.Meshing - 01.Meshing Overview.flv	1.1 MB
13.External Loads _ A Reference - 3.Gravity.flv	990.4 KB
09.Using Design Scenarios - 1.Design Scenarios Overview.flv	940.1 KB
01.Introduction - 1.Welcome.flv	861.2 KB
05.Static Analysis of an Assembly - 1.Analysis of an Assembly Overview.flv	853.8 KB
06.Shrink Fit Analysis - 1.Shrink Fit Overview.flv	786.8 KB
11.Temperature Load - 1.Temperature Load Overview.flv	784.0 KB
02.Static Analysis of a Part - 16.Results_ Summary.flv	670.8 KB
14.Fixtures_ A Reference - 3.Hinge.flv	652.8 KB
02.Static Analysis of a Part - 01.Overview.flv	570.3 KB
/.../2010 SolidWorks Workgroup PDM/
3.Managing Assemblies - 09.Toolbox - Without Revision Control.flv	5.9 MB
3.Managing Assemblies - 07.As Built vs. Latest.flv	5.6 MB
3.Managing Assemblies - 03.Checking In a New Assembly.flv	5.5 MB
5.Managing Other Filetypes - 1.SolidWorks Explorer.flv	5.4 MB
2.Managing Parts - 08.Making Revisions.flv	4.8 MB
3.Managing Assemblies - 11.Collaborative Environments.flv	4.7 MB
4.Managing Drawings - 4.Assembly Drawing Changes.flv	4.6 MB
2.Managing Parts - 03.Checking In a New Part - II.flv	4.6 MB
2.Managing Parts - 10.Document Information.flv	4.2 MB
5.Managing Other Filetypes - 4.Adding Attachments.flv	4.0 MB
3.Managing Assemblies - 10.Toolbox - With Revision Control.flv	3.5 MB
2.Managing Parts - 04.Check In Tips.flv	3.2 MB
3.Managing Assemblies - 06.Making Revisions - Part II.flv	3.1 MB
2.Managing Parts - 09.Exercise I.flv	3.1 MB
1.PDM Overview - 2.SolidWorks PDM Interface.flv	3.0 MB
1.PDM Overview - 1.SolidWorks PDM Intro.flv	2.9 MB
3.Managing Assemblies - 05.Making Revisions - Part I.flv	2.8 MB
2.Managing Parts - 02.Checking In a New Part - I.flv	2.8 MB
4.Managing Drawings - 2.Check In Part with Drawing.flv	2.7 MB
7.Basic Vault Admin for Clients - 4.Overwriting a Revision.flv	2.6 MB
2.Managing Parts - 07.Open Check Out.flv	2.5 MB
3.Managing Assemblies - 08.Toolbox - Overview.flv	2.3 MB
4.Managing Drawings - 3.Adding a Drawing to a Part.flv	2.3 MB
5.Managing Other Filetypes - 2.Non-SolidWorks Files.flv	2.3 MB
2.Managing Parts - 13.Advanced Search Functionality.flv	2.1 MB
3.Managing Assemblies - 04.Making Revisions - Overview.flv	2.1 MB
2.Managing Parts - 11.Opening Previous Revisions.flv	2.1 MB
7.Basic Vault Admin for Clients - 5.Bumping Revisions.flv	1.9 MB
8.Appendix - 2.SolidWorks PDM Options.flv	1.8 MB
7.Basic Vault Admin for Clients - 7.Deleting Files or Revisions.flv	1.8 MB
7.Basic Vault Admin for Clients - 6.Renaming Files.flv	1.7 MB
2.Managing Parts - 12.Basic Search Functionality.flv	1.7 MB
2.Managing Parts - 06.Releasing Ownership.flv	1.7 MB
8.Appendix - 1.Colors and Icons.flv	1.5 MB
7.Basic Vault Admin for Clients - 2.Changing a Project.flv	1.5 MB
2.Managing Parts - 05.Displaying Labels.flv	1.3 MB
7.Basic Vault Admin for Clients - 3.Creating Sub-Projects.flv	1.3 MB
3.Managing Assemblies - 02.Assembly Structure.flv	1.2 MB
5.Managing Other Filetypes - 3.Non-Revision Controlled Files.flv	828.4 KB
4.Managing Drawings - 1.Introduction.flv	751.8 KB
6.Lifecycles - 1.Lifecycle Overview.flv	721.4 KB
2.Managing Parts - 01.Introduction.flv	502.7 KB
7.Basic Vault Admin for Clients - 1.Introduction.flv	490.3 KB
3.Managing Assemblies - 01.Introduction.flv	488.5 KB
/SolidWorks/SolidWorks 2010/2010 TolAnalyst/
2.DimXpert - 11.DimXpert Exercise - Part I.flv	11.6 MB
2.DimXpert - 02.Auto Dimension Scheme.flv	7.8 MB
2.DimXpert - 07.Tolerance Status.flv	6.9 MB
2.DimXpert - 12.DimXpert Exercise - Part II.flv	6.8 MB
3.TolAnalyst - 7.TolAnalyst Exercise.flv	6.0 MB
2.DimXpert - 10.Pattern Feature.flv	4.5 MB
3.TolAnalyst - 5.Analyzing the Results.flv	3.6 MB
3.TolAnalyst - 4.Assembly Constraints.flv	3.0 MB
2.DimXpert - 06.Geometric Tolerances.flv	2.8 MB
2.DimXpert - 08.DimXpert Options.flv	2.8 MB
2.DimXpert - 05.Location Dimensions.flv	2.7 MB
2.DimXpert - 03.Datums.flv	2.6 MB
3.TolAnalyst - 6.Fixed Floating Fasteners.flv	2.5 MB
3.TolAnalyst - 2.Establishing the Measurement.flv	2.5 MB
1.Course Introduction - 1.Introduction.flv	2.3 MB
2.DimXpert - 09.Using DimXpert Information in Drawings.flv	2.2 MB
2.DimXpert - 04.Size Dimensions.flv	2.2 MB
2.DimXpert - 01.DimXpert Overview.flv	2.1 MB
3.TolAnalyst - 3.Assembly Sequence.flv	1.2 MB
3.TolAnalyst - 1.TolAnalyst Overview.flv	1.2 MB
/.../2010 Update Training/
1.General Enhancements - 4.SimulationXpress.flv	18.5 MB
1.General Enhancements - 3.SustainabilityXpress.flv	15.3 MB
7.Routing - 6.Piping and Instrumentation Diagrams.flv	14.5 MB
3.Parts & Features - 07.Split Line.flv	13.5 MB
7.Routing - 3.Coverings.flv	12.4 MB
3.Parts & Features - 10.Feature Paint.flv	12.1 MB
5.Drawings and Detailing - 3.BOMs.flv	10.7 MB
3.Parts & Features - 09.Part Display States.flv	9.4 MB
8.Simulation - 5.Connectors.flv	9.3 MB
3.Parts & Features - 01.Reference Planes.flv	9.0 MB
1.General Enhancements - 1.Interface.flv	9.0 MB
4.Assemblies - 6.Component Reference Designators.flv	8.7 MB
4.Assemblies - 2.Mirrored Components.flv	8.4 MB
3.Parts & Features - 06.Wrap Feature.flv	8.4 MB
6.Sheet Metal - 1.Multibody Sheetmetal Parts.flv	8.3 MB
4.Assemblies - 1.Assembly Visualization.flv	8.3 MB
5.Drawings and Detailing - 6.DimXpert.flv	7.8 MB
8.Simulation - 3.Design Studies.flv	7.8 MB
3.Parts & Features - 05.Sketch Text And Custom Properties.flv	7.7 MB
7.Routing - 5.C-Points.flv	7.6 MB
3.Parts & Features - 04.Configurations.flv	7.3 MB
6.Sheet Metal - 3.Closed Corner.flv	7.2 MB
7.Routing - 2.Manufacture Style Flattening.flv	7.1 MB
4.Assemblies - 3.Virtual Components.flv	6.9 MB
8.Simulation - 1.Simulation Interface.flv	6.6 MB
7.Routing - 1.Adding Components to Routes.flv	6.4 MB
8.Simulation - 4.Beams.flv	6.4 MB
3.Parts & Features - 03.Multibody Part Materials.flv	6.3 MB
1.General Enhancements - 5.Design Checker.flv	5.7 MB
5.Drawings and Detailing - 1.Dimensions.flv	5.6 MB
7.Routing - 7.Export Routes.flv	5.2 MB
8.Simulation - 2.Studies.flv	5.0 MB
8.Simulation - 6.Contacts.flv	5.0 MB
4.Assemblies - 5.View Mates.flv	4.9 MB
3.Parts & Features - 08.Knit Surface.flv	4.7 MB
2.Sketching - 4.Equation Driven Curves.flv	4.2 MB
5.Drawings and Detailing - 2.Annotations.flv	4.1 MB
4.Assemblies - 4.Mates.flv	3.8 MB
2.Sketching - 2.Convert Entities.flv	3.8 MB
5.Drawings and Detailing - 4.Drawing Views.flv	3.5 MB
5.Drawings and Detailing - 5.Cosmetic Threads.flv	3.5 MB
6.Sheet Metal - 2.Hems.flv	3.5 MB
3.Parts & Features - 02.Hole Wizard.flv	3.4 MB
1.General Enhancements - 2.Title Blocks In Parts and Assemblies.flv	3.3 MB
2.Sketching - 1.Sketch Fillets.flv	3.0 MB
6.Sheet Metal - 4.Export to DXF-DWG.flv	3.0 MB
7.Routing - 4.Piping Drawings.flv	3.0 MB
2.Sketching - 3.3D Sketching.flv	2.9 MB
8.Simulation - 7.Results.flv	2.3 MB
1.General Enhancements - 6.SolidWorks Rx.flv	2.3 MB
/.../2011 3D Skills/
1.Parts - 10.Extruded Boss.flv	22.3 MB
1.Parts - 05.Circles & Arcs.flv	20.4 MB
3.Drawings - 2.Model View.flv	20.0 MB
2.Assemblies - 4.Adding Mates.flv	19.9 MB
3.Drawings - 1.Introducing Drawings.flv	17.4 MB
1.Parts - 07.Dimensions.flv	16.5 MB
3.Drawings - 6.Bill of Materials.flv	16.0 MB
1.Parts - 03.Lines.flv	15.9 MB
1.Parts - 06.Geometric Relations.flv	14.9 MB
3.Drawings - 3.Section View.flv	12.9 MB
3.Drawings - 7.Balloons.flv	12.6 MB
1.Parts - 02.The Sketcher.flv	11.5 MB
2.Assemblies - 3.Inserting Components.flv	11.0 MB
1.Parts - 12.Shell.flv	10.4 MB
2.Assemblies - 2.Starting an Assembly.flv	10.4 MB
1.Parts - 09.Convert Entities.flv	10.3 MB
2.Assemblies - 5.Collision Detection.flv	10.3 MB
1.Parts - 11.Revolved Boss.flv	10.2 MB
1.Parts - 04.Rectangles.flv	9.8 MB
3.Drawings - 5.Dimensions.flv	9.2 MB
3.Drawings - 4.Detail View.flv	8.1 MB
1.Parts - 08.Sketches on Faces.flv	7.1 MB
1.Parts - 01.Course Introduction.flv	5.0 MB
2.Assemblies - 1.Introducing Assemblies.flv	1.5 MB
/.../2011 Advanced Parts/
3.Sweeps - 9.Threads.flv	35.7 MB
5.Flex Feature - 2.Flex Feature.flv	31.4 MB
1.Advanced Sketching - 07.3D Sketching.flv	23.0 MB
1.Advanced Sketching - 08.3D Sketching with Planes.flv	22.3 MB
2.Advanced Fillets - 2.Variable Radius Fillets.flv	21.7 MB
3.Sweeps - 6.Profile Orientation.flv	21.5 MB
6.Multibody Parts - 8.Additional Techniques.flv	19.6 MB
6.Multibody Parts - 4.Splitting Bodies - Part B.flv	19.5 MB
6.Multibody Parts - 6.Combining Multiple Bodies.flv	18.4 MB
4.Lofts - 02.The Basic Loft.flv	17.9 MB
4.Lofts - 05.Start-End Constraints.flv	17.1 MB
4.Lofts - 07.Profile Geometry.flv	16.6 MB
7.Indent Feature - 1.Indent Feature.flv	16.2 MB
1.Advanced Sketching - 11.Curve Through XYZ Points.flv	16.1 MB
2.Advanced Fillets - 7.Fillet Xpert.flv	15.6 MB
2.Advanced Fillets - 1.Fillet Options.flv	15.5 MB
5.Flex Feature - 3.Bending.flv	15.2 MB
3.Sweeps - 2.The Basic Sweep.flv	15.2 MB
1.Advanced Sketching - 09.3D Sketch Planes.flv	15.2 MB
6.Multibody Parts - 9.Positioning Bodies.flv	14.2 MB
6.Multibody Parts - 5.Multibody Design Techniques.flv	14.1 MB
3.Sweeps - 4.Guide Curves.flv	13.4 MB
4.Lofts - 06.Guide Curves.flv	11.4 MB
3.Sweeps - 7.Twist.flv	11.1 MB
1.Advanced Sketching - 06.3D Sketching - Intro.flv	10.8 MB
2.Advanced Fillets - 8.Corner Xpert.flv	10.7 MB
4.Lofts - 04.Loft Profiles.flv	10.7 MB
3.Sweeps - 3.Path Options.flv	10.6 MB
5.Flex Feature - 5.Tapering and Stretching.flv	10.3 MB
3.Sweeps - 5.Multiple Guide Curves.flv	10.2 MB
6.Multibody Parts - 1.Introduction.flv	10.0 MB
4.Lofts - 09.Adding Loft Sections.flv	9.9 MB
7.Indent Feature - 2.Using Multiple Tool Bodies.flv	9.9 MB
3.Sweeps - 8.Cutting with Sweeps.flv	9.8 MB
6.Multibody Parts - 3.Splitting Bodies - Part A.flv	9.7 MB
6.Multibody Parts - 7.Swept Cuts with Bodies.flv	9.5 MB
1.Advanced Sketching - 15.Intersection Curve.flv	9.1 MB
7.Indent Feature - 3.Multiple Tool Regions.flv	7.9 MB
4.Lofts - 08.Centerline.flv	7.8 MB
6.Multibody Parts - 2.Creating Multiple Bodies.flv	7.8 MB
1.Advanced Sketching - 16.Derived Sketches.flv	7.6 MB
1.Advanced Sketching - 14.Projected Curve.flv	6.5 MB
1.Advanced Sketching - 04.Parabola.flv	6.5 MB
1.Advanced Sketching - 10.Helixes & Spirals.flv	6.4 MB
1.Advanced Sketching - 03.Partial Ellipse.flv	6.4 MB
1.Advanced Sketching - 02.Ellipse.flv	6.2 MB
1.Advanced Sketching - 12.Composite Curve.flv	5.8 MB
7.Indent Feature - 4.Surfaces and the Cut Option.flv	5.6 MB
4.Lofts - 10.Cutting with a Loft.flv	5.4 MB
4.Lofts - 01.Introduction.flv	5.3 MB
5.Flex Feature - 4.Twisting.flv	5.3 MB
2.Advanced Fillets - 3.Face Fillets.flv	4.8 MB
2.Advanced Fillets - 5.Curvature Continuous Fillets.flv	4.7 MB
2.Advanced Fillets - 4.Hold Line Fillets.flv	4.2 MB
2.Advanced Fillets - 6.Full Round Fillets.flv	4.2 MB
1.Advanced Sketching - 05.Splitting Entities.flv	4.1 MB
1.Advanced Sketching - 01.Polygon.flv	4.0 MB
3.Sweeps - 1.Introduction.flv	3.8 MB
1.Advanced Sketching - 17.Sketch Xpert.flv	3.8 MB
4.Lofts - 03.Closing a Loft.flv	3.4 MB
1.Advanced Sketching - 13.Curve Through Reference Points.flv	3.2 MB
5.Flex Feature - 1.Introduction.flv	1.4 MB
/.../2011 AutoCAD to SolidWorks/
1.AutoCAD to SolidWorks Tools - 12.Blocks and Mechanisms.flv	32.6 MB
2.SolidWorks Parts - 7.Extruded Boss.flv	22.3 MB
2.SolidWorks Parts - 4.Circles And Arcs.flv	20.4 MB
4.SolidWorks Drawings - 2.Model View.flv	20.0 MB
3.SolidWorks Assemblies - 4.Adding Mates.flv	19.9 MB
1.AutoCAD to SolidWorks Tools - 10.3D Features.flv	19.1 MB
1.AutoCAD to SolidWorks Tools - 2.What is SolidWorks.flv	18.0 MB
4.SolidWorks Drawings - 1.Introducing Drawings.flv	17.4 MB
2.SolidWorks Parts - 6.Dimensions.flv	16.5 MB
4.SolidWorks Drawings - 6.Bill of Materials.flv	16.0 MB
2.SolidWorks Parts - 2.Lines.flv	15.9 MB
1.AutoCAD to SolidWorks Tools - 8.Import to Part - Each Layer as Sketch.flv	15.8 MB
2.SolidWorks Parts - 5.Geometric Relations.flv	14.9 MB
1.AutoCAD to SolidWorks Tools - 5.Import to Drawing.flv	14.1 MB
4.SolidWorks Drawings - 3.Section View.flv	12.9 MB
4.SolidWorks Drawings - 7.Balloons.flv	12.6 MB
2.SolidWorks Parts - 1.The Sketcher.flv	11.5 MB
3.SolidWorks Assemblies - 3.Inserting Components.flv	11.0 MB
2.SolidWorks Parts - 11.Shell.flv	10.4 MB
3.SolidWorks Assemblies - 2.Starting an Assembly.flv	10.4 MB
2.SolidWorks Parts - 9.Convert Entities.flv	10.3 MB
3.SolidWorks Assemblies - 5.Collision Detection.flv	10.3 MB
2.SolidWorks Parts - 8.Revolved Boss.flv	10.2 MB
1.AutoCAD to SolidWorks Tools - 6.Embedded AutoCAD Drawing.flv	10.2 MB
1.AutoCAD to SolidWorks Tools - 9.Orienting and Aligning Sketches.flv	10.0 MB
2.SolidWorks Parts - 3.Rectangles.flv	9.8 MB
4.SolidWorks Drawings - 5.Dimensions.flv	9.2 MB
4.SolidWorks Drawings - 4.Detail View.flv	8.1 MB
2.SolidWorks Parts - 10.Sketches on Faces.flv	7.1 MB
1.AutoCAD to SolidWorks Tools - 7.Import to Part.flv	6.6 MB
1.AutoCAD to SolidWorks Tools - 3.Import Options.flv	5.7 MB
1.AutoCAD to SolidWorks Tools - 4.DraftSight.flv	4.3 MB
1.AutoCAD to SolidWorks Tools - 11.Import to Part - 3D.flv	3.8 MB
1.AutoCAD to SolidWorks Tools - 1.Introduction - Value of 2D Data.flv	3.7 MB
3.SolidWorks Assemblies - 1.Introducing Assemblies.flv	1.5 MB
/.../2011 Core Concepts/
5.Parts - 07.Appearances.flv	25.9 MB
3.Sketched Features - 2.Extruded Boss.flv	22.3 MB
5.Parts - 04.Design Intent.flv	21.0 MB
2.The Sketcher - 04.Circles & Arcs.flv	20.4 MB
6.Assemblies - 05.Adding Mates.flv	19.9 MB
4.Applied Features - 02.Fillets.flv	19.2 MB
6.Assemblies - 17.Exploding Assemblies.flv	18.3 MB
5.Parts - 06.Symmetry B.flv	17.6 MB
3.Sketched Features - 8.Loft.flv	17.1 MB
5.Parts - 15.Configurations - Table.flv	16.8 MB
5.Parts - 08.Editing Parts.flv	16.6 MB
2.The Sketcher - 07.Dimensions.flv	16.5 MB
2.The Sketcher - 05.Automatic Relations.flv	16.3 MB
2.The Sketcher - 09.Over Defined Sketches.flv	16.2 MB
2.The Sketcher - 02.Lines.flv	15.9 MB
5.Parts - 19.Design Tables for Features.flv	15.8 MB
6.Assemblies - 14.Interference Detection.flv	15.2 MB
5.Parts - 05.Symmetry A.flv	15.0 MB
2.The Sketcher - 06.Geometric Relations.flv	14.9 MB
3.Sketched Features - 7.Sweep.flv	14.9 MB
3.Sketched Features - 9.Ribs.flv	14.9 MB
1.Introduction - 2.SolidWorks Overview.flv	14.7 MB
4.Applied Features - 14.Hole Wizard.flv	14.1 MB
6.Assemblies - 04.Positioning Parts.flv	14.0 MB
5.Parts - 13.Configurations - Dimension Changes.flv	13.6 MB
1.Introduction - 5.View Manipulation.flv	12.8 MB
4.Applied Features - 03.Chamfers.flv	12.5 MB
4.Applied Features - 10.Curve Driven Patterns.flv	12.4 MB
6.Assemblies - 18.Introduction to Top Down Design.flv	12.4 MB
1.Introduction - 3.SolidWorks Interface.flv	12.1 MB
5.Parts - 14.Configurations - Feature Suppression.flv	11.6 MB
2.The Sketcher - 10.Sketch Fillets.flv	11.6 MB
2.The Sketcher - 01.The Sketcher.flv	11.5 MB
4.Applied Features - 13.Planes II.flv	11.4 MB
6.Assemblies - 06.Coincident Mate.flv	11.3 MB
6.Assemblies - 20.Assembly BOM.flv	11.1 MB
5.Parts - 09.Instant 3D.flv	11.1 MB
6.Assemblies - 03.Inserting Components.flv	11.0 MB
5.Parts - 18.Design Tables - Creating.flv	11.0 MB
4.Applied Features - 11.Fill Patterns.flv	10.9 MB
6.Assemblies - 10.Smart Mates.flv	10.7 MB
5.Parts - 12.Configurations - Intro.flv	10.6 MB
6.Assemblies - 12.Assembly Appearances.flv	10.6 MB
4.Applied Features - 04.Shell.flv	10.4 MB
6.Assemblies - 02.Starting an Assembly.flv	10.4 MB
2.The Sketcher - 14.Convert Entities.flv	10.3 MB
6.Assemblies - 16.Collision Detection.flv	10.3 MB
3.Sketched Features - 5.Revolved Boss.flv	10.2 MB
6.Assemblies - 11.Multiple Mate Mode.flv	10.1 MB
2.The Sketcher - 03.Rectangles.flv	9.8 MB
1.Introduction - 4.Task Pane Resources.flv	9.6 MB
5.Parts - 17.Design Tables - Renaming Dimensions.flv	9.5 MB
6.Assemblies - 13.Assembly Appearances - II.flv	9.1 MB
5.Parts - 02.Starting a Part.flv	8.9 MB
5.Parts - 11.Parent Child Relations.flv	8.9 MB
4.Applied Features - 08.Linear Patterns.flv	8.9 MB
6.Assemblies - 19.Intro to Top Down Design - II.flv	8.6 MB
2.The Sketcher - 08.Fully Defined Sketches.flv	8.5 MB
4.Applied Features - 05.3D Mirroring.flv	8.1 MB
4.Applied Features - 06.Planes I.flv	7.6 MB
2.The Sketcher - 13.Trim Tools.flv	7.3 MB
2.The Sketcher - 15.Sketches on Faces.flv	7.1 MB
5.Parts - 03.Picking a Plane.flv	6.3 MB
6.Assemblies - 15.Dynamic Clearance.flv	6.2 MB
4.Applied Features - 09.Circular Patterns.flv	5.4 MB
3.Sketched Features - 4.Extruded Cut.flv	5.4 MB
5.Parts - 10.Feature Suppression.flv	5.0 MB
3.Sketched Features - 3.Contours & Thin Features.flv	4.9 MB
4.Applied Features - 12.Creating Axes.flv	4.6 MB
5.Parts - 16.Design Tables - Intro.flv	4.5 MB
6.Assemblies - 09.Tangent Mate.flv	4.5 MB
2.The Sketcher - 12.Offset Entities.flv	3.9 MB
2.The Sketcher - 11.Sketch Mirroring.flv	3.7 MB
6.Assemblies - 07.Distance Mate.flv	3.5 MB
5.Parts - 01.Introducing Parts.flv	3.3 MB
4.Applied Features - 07.Mirroring Bodies.flv	2.8 MB
6.Assemblies - 08.Concentric Mate.flv	2.7 MB
1.Introduction - 1.Course Introduction.flv	2.0 MB
3.Sketched Features - 6.Revolved Cut.flv	1.8 MB
6.Assemblies - 01.Introducing Assemblies.flv	1.5 MB
3.Sketched Features - 1.Sketched Features Introduction.flv	1.1 MB
4.Applied Features - 01.Applied Features Overview.flv	388.0 KB
/SolidWorks/SolidWorks 2011/2011 Drawings/
2011 Drawings - 21.BOMs - Advanced Options.flv	24.2 MB
2011 Drawings - 02.Model View.flv	20.0 MB
2011 Drawings - 01.Introducing Drawings.flv	17.4 MB
2011 Drawings - 19.Note Annotations.flv	16.0 MB
2011 Drawings - 20.Bill of Materials.flv	15.8 MB
2011 Drawings - 25.Custom Sheet Formats.flv	15.7 MB
2011 Drawings - 14.Driving Dimensions.flv	15.2 MB
2011 Drawings - 24.Custom Templates.flv	14.4 MB
2011 Drawings - 15.Driven Dimensions.flv	13.3 MB
2011 Drawings - 05.Section View.flv	12.9 MB
2011 Drawings - 23.Balloons.flv	12.6 MB
2011 Drawings - 22.Linking BOMs.flv	11.2 MB
2011 Drawings - 13.Dimensions.flv	9.2 MB
2011 Drawings - 07.Detail View.flv	8.1 MB
2011 Drawings - 18.Center Marks.flv	8.0 MB
2011 Drawings - 12.Scale.flv	7.2 MB
2011 Drawings - 06.Assembly Section View.flv	6.8 MB
2011 Drawings - 09.Exploded View.flv	5.1 MB
2011 Drawings - 08.Broken View.flv	4.7 MB
2011 Drawings - 16.Ordinate Dimensions.flv	4.6 MB
2011 Drawings - 10.Display Options.flv	4.2 MB
2011 Drawings - 17.Baseline Dimensions.flv	4.1 MB
2011 Drawings - 04.Auxiliary View.flv	3.9 MB
2011 Drawings - 11.View Alignment.flv	3.7 MB
2011 Drawings - 03.Projected View.flv	2.7 MB
/SolidWorks/SolidWorks 2011/2011 DriveWorksXpress/
1.DriveWorksXpress - 5.Creating Rules - Dimensions.flv	27.3 MB
1.DriveWorksXpress - 6.Creating Rules - Features And Properties.flv	24.3 MB
1.DriveWorksXpress - 4.Creating the Input Form.flv	20.9 MB
1.DriveWorksXpress - 3.Capturing SolidWorks Data.flv	20.4 MB
1.DriveWorksXpress - 7.Creating New Variants.flv	12.6 MB
1.DriveWorksXpress - 2.Starting DriveWorksXpress.flv	11.2 MB
1.DriveWorksXpress - 1.Introduction.flv	9.3 MB
/.../2011 Mold Tools/
2.Mold Tools - Core and Cavity - 1.Draft Analysis - Part A.flv	26.8 MB
2.Mold Tools - Core and Cavity - 8.Side Cores - Part A.flv	21.8 MB
2.Mold Tools - Core and Cavity - 9.Side Cores - Part B.flv	19.4 MB
2.Mold Tools - Core and Cavity - 7.Creating the Mold.flv	19.1 MB
3.Fastening Features - 5.Lip and Groove.flv	16.1 MB
3.Fastening Features - 1.Mounting Boss.flv	13.4 MB
3.Fastening Features - 4.Vent Feature.flv	11.7 MB
3.Fastening Features - 3.Snap Groove.flv	11.6 MB
2.Mold Tools - Core and Cavity - 5.Shut-Off Surfaces.flv	9.1 MB
2.Mold Tools - Core and Cavity - 3.Scale.flv	8.5 MB
2.Mold Tools - Core and Cavity - 4.Parting Lines.flv	7.9 MB
3.Fastening Features - 2.Snap Hook.flv	7.3 MB
2.Mold Tools - Core and Cavity - 6.Parting Surface.flv	5.8 MB
2.Mold Tools - Core and Cavity - 2.Draft Analysis - Part B.flv	4.9 MB
1.Introduction - 1.Introduction.flv	2.7 MB
/.../2011 Update Training/
08.Weldments - 2.Weld Beads.flv	31.7 MB
01.General Enhancements - 5.Photoview 360.flv	27.5 MB
03.Assemblies - 5.Assembly Defeature.flv	22.4 MB
01.General Enhancements - 3.Display Manager- Decals.flv	22.0 MB
01.General Enhancements - 2.Display Manager- Appearances.flv	18.9 MB
01.General Enhancements - 4.Display Manager-Scenes.flv	16.4 MB
03.Assemblies - 4.Assembly Visualization.flv	16.0 MB
07.Sheet Metal - 5.DXF and DWG Mapping.flv	15.9 MB
10.Weldments - 2.Interface Changes.flv	15.7 MB
10.Weldments - 1.General Enhancements.flv	15.7 MB
10.Weldments - 3.2D Simplification.flv	15.7 MB
03.Assemblies - 9.Walkthroughs.flv	15.2 MB
08.Weldments - 3.Grid System.flv	14.6 MB
10.Weldments - 5.Beams.flv	14.6 MB
02.Parts & Features - 2.Equation Sharing.flv	14.1 MB
04.Configurations - 4.Configurations- Cosmetic Threads.flv	13.9 MB
04.Configurations - 3.Configurations- Global Variables.flv	13.8 MB
04.Configurations - 2.Configurations- Scale.flv	13.5 MB
01.General Enhancements - 6.DFMXpress.flv	12.6 MB
07.Sheet Metal - 6.Sheet Metal Properties.flv	12.5 MB
01.General Enhancements - 7.DXF and DWG Import Wizard.flv	12.3 MB
07.Sheet Metal - 2.Convert to Sheet Metal.flv	12.2 MB
02.Parts & Features - 7.Symmetry Check.flv	12.1 MB
02.Parts & Features - 3.Equation Suppression.flv	11.8 MB
02.Parts & Features - 1.Defeature-Part.flv	11.5 MB
04.Configurations - 6.Configuration Publisher.flv	11.1 MB
06.Surfacing - 1.Surface Extrudes.flv	11.0 MB
03.Assemblies - 7.Replace Mate Entities.flv	10.5 MB
08.Weldments - 4.Welds in Drawings.flv	10.4 MB
10.Weldments - 4.Shells.flv	10.0 MB
09.Routing - 1.Routing Library Manager.flv	9.7 MB
09.Routing - 3.Weld Gaps.flv	9.5 MB
05.Drawings and Detailing - 9.Hole Table.flv	9.4 MB
05.Drawings and Detailing - 2.Dimension Palette - Alignment.flv	9.3 MB
04.Configurations - 5.Configurations- K factor.flv	9.2 MB
09.Routing - 5.Moving and Rotating a Fitting.flv	8.9 MB
03.Assemblies - 1.Assembly Fillets.flv	8.9 MB
05.Drawings and Detailing - 6.Sheet Metal Drawings.flv	8.7 MB
06.Surfacing - 2.Parting Surfaces.flv	8.6 MB
02.Parts & Features - 5.Revolve.flv	8.4 MB
01.General Enhancements - 1.Converting Files to 2011.flv	8.2 MB
08.Weldments - 1.Cut Lists.flv	8.1 MB
07.Sheet Metal - 1.Bend Calculation Tables.flv	8.0 MB
03.Assemblies - 2.Assembly Chamfers.flv	7.9 MB
03.Assemblies - 8.SpeedPak.flv	7.9 MB
03.Assemblies - 3.Assembly Weld Beads.flv	7.9 MB
09.Routing - 2.Route Along Existing Geometry.flv	7.4 MB
05.Drawings and Detailing - 1.Dimension Palette - Auto Arrange.flv	7.1 MB
03.Assemblies - 6.Interference Detection.flv	6.4 MB
04.Configurations - 1.Configurations Enhancements.flv	6.4 MB
07.Sheet Metal - 3.Pattern and Mirror Flanges.flv	5.7 MB
01.General Enhancements - 8..IFC Files.flv	5.6 MB
02.Parts & Features - 4.Helix- Variable Pitch.flv	5.6 MB
02.Parts & Features - 6.Scale.flv	5.3 MB
05.Drawings and Detailing - 8.Model Color.flv	5.2 MB
05.Drawings and Detailing - 3.Display Scale.flv	4.8 MB
05.Drawings and Detailing - 7.Hide Bodies.flv	4.6 MB
05.Drawings and Detailing - 5.Center Marks.flv	4.2 MB
07.Sheet Metal - 4.Recreate Flat Pattern.flv	3.4 MB
05.Drawings and Detailing - 4.Show Dimension Units.flv	3.4 MB
09.Routing - 4.Autosize.flv	2.8 MB
09.Routing - 6.Isolate.flv	2.8 MB
/SolidWorks/SolidWorks 2011/2011 Weldments/
1.Weldments - 8.Weld Beads.flv	27.3 MB
1.Weldments - 2.Structural Members.flv	20.6 MB
1.Weldments - 7.Gussets And End Caps.flv	19.0 MB
1.Weldments - 12.Creating Sub-Weldments.flv	18.5 MB
1.Weldments - 9.Cut Lists - Part A.flv	18.4 MB
1.Weldments - 3.Layout Sketches.flv	15.2 MB
1.Weldments - 5.Trim Extend - Part B.flv	13.6 MB
1.Weldments - 4.Trim Extend - Part A.flv	13.1 MB
1.Weldments - 6.Plates And Fillet Beads.flv	12.9 MB
1.Weldments - 13.Creating Custom Profiles.flv	11.7 MB
1.Weldments - 10.Cut Lists - Part B.flv	10.7 MB
1.Weldments - 11.Weld Table.flv	8.3 MB
1.Weldments - 1.Introduction.flv	3.7 MB
/SolidWorks/SolidWorks 2011/Case Studies/Basic Mechanisms/
2.Part Exercises - 3.Rose Cover 1.flv	45.3 MB
2.Part Exercises - 1.Handle 1.flv	40.3 MB
3.Creating the Assembly - 2.Final Assembly.flv	34.8 MB
3.Creating the Assembly - 1.Latch Sub-Assembly.flv	31.7 MB
2.Part Exercises - 8.Latch.flv	31.6 MB
2.Part Exercises - 4.Rose Cover 2.flv	29.3 MB
2.Part Exercises - 6.Latch Plate.flv	28.0 MB
2.Part Exercises - 7.Face Plate.flv	22.2 MB
2.Part Exercises - 5.Lock Mechanism.flv	19.3 MB
2.Part Exercises - 2.Handle 2.flv	8.1 MB
1.Introduction - 1.Introduction.flv	6.4 MB
/.../Parts And Assemblies/
2.Basic Part Exercises - 2.Mounting Block - Part 2.flv	23.0 MB
3.Basic Assembly Exercises - 1.Tape Case Assembly.flv	21.5 MB
2.Basic Part Exercises - 6.Bracket - Part 3.flv	20.6 MB
2.Basic Part Exercises - 3.Mounting Block - Part 3.flv	19.8 MB
3.Basic Assembly Exercises - 2.Brace Assembly - Part 1.flv	17.3 MB
2.Basic Part Exercises - 10.Curved Housing - Part 3.flv	17.1 MB
2.Basic Part Exercises - 4.Bracket - Part 1.flv	17.0 MB
3.Basic Assembly Exercises - 3.Brace Assembly - Part 2.flv	15.5 MB
2.Basic Part Exercises - 9.Curved Housing - Part 2.flv	15.3 MB
2.Basic Part Exercises - 5.Bracket - Part 2.flv	13.7 MB
2.Basic Part Exercises - 7.Bracket - Part 4.flv	9.1 MB
2.Basic Part Exercises - 1.Mounting Block - Part 1.flv	7.1 MB
2.Basic Part Exercises - 11.Curved Housing - Part 4.flv	7.1 MB
2.Basic Part Exercises - 8.Curved Housing - Part 1.flv	6.6 MB
1.Introduction - 1.Exercises Introduction.flv	3.3 MB
Total files 2268