Udemy The Complete ETABS Professional For Structural Engineers | 7FE1D99B8082982C8B8CAF9680F7D0AAF152270F

Udemy The Complete ETABS Professional For Structural Engineers

Name	Udemy The Complete ETABS Professional For Structural Engineers	DOWNLOAD Copy Link
Total Size	13.3 GB
Total Files	197
Hash	7FE1D99B8082982C8B8CAF9680F7D0AAF152270F

/1. Design of Pre Engineered Building as per Indian Standards/
11. Calculation of Dead, Live and Wind Loads.mp4	591.5 MB
10. Define Load combinations.mp4	335.0 MB
3. Define Frame Section Properties.mp4	245.1 MB
18. Value Engineering of the PEB Shed.mp4	170.0 MB
6. Draw Gable End Structure for the Ends.mp4	162.9 MB
17. Steel Sructure Design of Pre Engineering Building Structure as per IS800.mp4	132.7 MB
5. Replicate the Whole portal along the length.mp4	121.2 MB
7. Draw Plan and Elevation Bracing.mp4	99.3 MB
19. Check the tabular results including Material Take off.mp4	94.2 MB
9. Define Load Cases.mp4	79.8 MB
1. Introduction to Pre Engineered Buildings.mp4	78.8 MB
12. Correct the Load Combinations.mp4	75.0 MB
2. Draw a portal frame from one end to other as per Drawing.mp4	73.6 MB
4. Replicate the Whole Portal along the Width.mp4	38.4 MB
8. Define Load Patterns.mp4	31.7 MB
16. Define Analysis options and Analyze the Steel Structure.mp4	25.1 MB
13. Assign the Releases to the Structural Members.mp4	23.7 MB
14. Assign Supports to the Building.mp4	14.3 MB
15. Define Modal cases.mp4	8.5 MB
11.1 PEB Wind Load Calculations.xls.xls	5.3 MB
/10. Basics of Structural Dynamics, Lateral Loads and Types of Structure System/
13. Types of High Rise Building Structural Systems.mp4	208.3 MB
12. Planning Building Configuration for Seismic Forces.mp4	118.3 MB
5. Fundamental natural Period and Case Studies of Different Buildings.mp4	110.6 MB
10. Natural Period , Frequency and Resonance.mp4	109.5 MB
4. Flat Slabs , Floating Columns and Structural Walls.mp4	94.7 MB
1. Basics of Wind and Seismic Forces on the buildings.mp4	83.5 MB
8. Mode Shapes of the Building.mp4	79.1 MB
7. Inelastic Behavior and Desirable Mechanism.mp4	77.7 MB
3. Damping and Peak Ground Acceleration.mp4	73.8 MB
6.1 Structure Behavior of High Rise Buildings under Dynamic Forces and other concepts .pdf.pdf	71.5 MB
9. Masonry Infill Walls and Damping.mp4	58.0 MB
2. CSSD Rule in Buildings against Earthquakes.mp4	53.9 MB
11. Basics of Response Spectrum and Ground Motion.mp4	52.5 MB
6. Asymmetrical Stiffness in Plan and Elevation.mp4	48.8 MB
/2. Linear Dynamic Analysis of a Billboard as per IS800/
1. Modelling of a Billboard with free modelling approach.mp4	310.8 MB
8. Structural Design and Optimization of the Steel Structure.mp4	230.2 MB
7. Remove the Instability in the Modelling Process. (Tips and Tricks).mp4	194.8 MB
2. Assigning the Section properties to all the members.mp4	166.6 MB
5. Define Wind Loads and Response Spectrum Loads to the Structure.mp4	123.3 MB
3. Assign End Releases and Supporting Conditions.mp4	92.7 MB
4. Define Load Patterns to the Steel Structure.mp4	73.1 MB
6. Define Load Combinations as per Auto Generate Option..mp4	10.6 MB
/3. Linear Dynamic Analysis and Design of a Heavy Steel Structure for AISC 360/
15. Optimization of Structural Steel Member Sizes for Economy.mp4	270.1 MB
4. Draw the Silo Supporting Floor with Good Steel Structure Arrangement.mp4	222.2 MB
5. Draw Second Floor on the top of Silo Supporting Steel Structure.mp4	127.9 MB
9. Define Load Cases and Load Combinations.mp4	125.6 MB
6. Draw Roofing Structural Steel Arrangement.mp4	121.1 MB
13. Response Spectrum Analysis and Review of Mode Shapes.mp4	105.9 MB
1. Check the Mode shapes ,Mode partiipation and Weight of Steel Structure.mp4	93.6 MB
2. Introduction to Heavy Industrial Equipment Supporting Steel Structures..mp4	91.9 MB
8. Define Load Patterns for Steel Industrial Heavy Structure.mp4	89.4 MB
14. Response spectrum Linear Dynamic Analysis and Design of Steel Structure.mp4	82.5 MB
16. Design of Structural Steel Connections.mp4	62.5 MB
3. Define Grids and Stories Data with Frame Section Properties.mp4	58.3 MB
7. Draw Vertical Elevation Bracing along the Minor Sway Direction.mp4	53.7 MB
10. Define Modal Cases and Supporting Conditions.mp4	53.1 MB
12. Remove any kind of Errors and Rectification of Mistakes in Modelling.mp4	33.2 MB
11. Define Semi Rigid Diaphragms for all the floors.mp4	14.5 MB
4. Draw the Silo Supporting Floor with Good Steel Structure Arrangement.mp4.jpg	74.8 KB
4. Draw the Silo Supporting Floor with Good Steel Structure Arrangement.txt	0.3 KB
/4. Linear Modal Analysis and Design of Steel Space Truss Structure as per AISC360/
2. Assign Supporting Conditions , Section Properties and Loads to the Truss.mp4	126.6 MB
5. Design of Steel Space Truss as per AISC 360-16.mp4	94.1 MB
1. Modelling of Structural Steel Space Truss with Free Modelling Approach.mp4	65.6 MB
4. Eigen Modal Analysis and Modal Static Analysis of the Truss.mp4	49.6 MB
3. Remove any kind of Instability in the Truss by Check Model Option.mp4	41.6 MB
/5. Non Linear Static AnalysisPush over Analysis/
6. Assign PMM hinges to the structure.mp4	107.2 MB
2. Define Non-Linear Material and Section Properties.mp4	85.8 MB
7. Analyze and Check the Model with Non Linear Pushover Load Case.mp4	82.4 MB
9. Improve the Performance of the Structure.mp4	76.0 MB
5. Define Gravity and Push over Load Case.mp4	72.4 MB
1. Introduction to the Pushover analysis (Non -Linear Static Analysis).mp4	63.9 MB
3. Define Loads Patterns and Load Cases.mp4	47.7 MB
8. Study the Pushover Curve and Learn to Find Performance point.mp4	27.0 MB
4. Analyze and Design the Structure.mp4	22.8 MB
/6. 23 Storey High Rise RCC Building as per Indian Standards/
28. Define Load Combinations.mp4	1.0 GB
19. Introduction and Explaination of IS18932016.mp4	390.6 MB
10. Model the RCC Columns and Shear Walls in the Structure.mp4	269.8 MB
21. Define and Assign Wind Load Patterns.mp4	222.6 MB
7. Define Frame Sections.mp4	200.7 MB
29. Understand the ETABS Editor File.mp4	179.9 MB
37. Design of RCC Beams and Columns.mp4	176.0 MB
24. Define Staircase and Super Imposed Dead Loading.mp4	167.1 MB
30. Set the Analysis Options.mp4	163.9 MB
35. Review the Dynamic Parameters.mp4	156.1 MB
34. Check the Static Base Shear.mp4	145.3 MB
32. Review the Fundamental Mode Shapes.mp4	118.5 MB
42. Design of Raft Foundation in SAFE.mp4	105.1 MB
41. Model the Raft Slab in SAFE.mp4	99.4 MB
33. Correct the Mode Shapes.mp4	95.5 MB
4. Enter the Storey Data in the model.mp4	95.3 MB
13. Model the Retaining Walls.mp4	81.5 MB
15. Assign the Diaphragms to the RCC structure.mp4	73.6 MB
26. Define Response Spectrum Load Case and Modal Cases.mp4	71.6 MB
11. Model the Cantilever Slab or Projections.mp4	69.7 MB
23. Define Super Imposed Dead Load , Dead Load and Live Load.mp4	66.8 MB
40. Model the Structure in SAFE.mp4	62.7 MB
38. Design of Shear Wall.mp4	59.2 MB
20. Define Earthquake Load Pattern.mp4	53.4 MB
2. Basic Introduction to the Methodology.mp4	51.3 MB
3. Enter the Grid Spacing in the model.mp4	50.8 MB
14. Assign the Releases to the Structure.mp4	45.3 MB
25. Assign live Load Reduction factors.mp4	41.9 MB
8. Define Diaphragms , Pier Labels and Spandrel Labels.mp4	40.2 MB
1. Learn to Read the Architectural Drawings.mp4	35.2 MB
5. Define the Material Properties.mp4	34.3 MB
39. Export Support Reactions to SAFE.mp4	25.2 MB
9. Define Snap Options.mp4	23.2 MB
18. Define Dead Loads and Live Loads.mp4	20.9 MB
27. Define P-Delta Options.mp4	19.3 MB
22. Define the Mass Source.mp4	18.2 MB
17. Define Response Spectrum Function.mp4	17.2 MB
31. Remove the instability Error.mp4	16.8 MB
16. Check for Instability in the Structure.mp4	16.2 MB
12. Define Supporting Conditions of the RCC Building.mp4	16.0 MB
36. Reduce the number of Modes.mp4	12.6 MB
6. Define Reinforcement Bar Sizes.mp4	4.8 MB
2.1 HIgh Rise Buildings Design Basis.xlsx.xlsx	2.7 MB
43. ETABS Professional.mp4	1.7 MB
1.2 Elevation showing different heights.pdf.pdf	249.9 KB
1.3 Plan upto 11th Storey.pdf.pdf	117.8 KB
1.1 Plan from 12th Storey to Terrace .pdf.pdf	111.2 KB
/7. ETABS Basics/Files/
18.1 Structural Steel Shapes for United States in US Units.pdf.pdf	1.9 MB
1.1 Introduction Manual to ETABS.pdf.pdf	1.3 MB
18.2 European Structural Steel Sections.xls.xls	508.4 KB
18.3 British Standard Steel Sections.xls.xls	185.3 KB
3.3 Metric MKS unit set predefined in ETABS.pdf.pdf	99.9 KB
3.1 Metric SI Default unit set predefined in ETABS.pdf.pdf	98.9 KB
3.2 US Default unit set predefined in ETABS.pdf.pdf	98.4 KB
2. Reinforced Cement Concrete Design Codes available in ETABS.mp4.jpg	88.0 KB
13.3 US Customary rebar sizes.pdf.pdf	70.2 KB
5.1 Steel design codes Available in ETABS.pdf.pdf	68.3 KB
4.1 Steel Section database Available in ETABS.pdf.pdf	68.2 KB
14.1 Strands Area and their Specifications.pdf.pdf	52.9 KB
13.2 US Soft Metric Rebar set.pdf.pdf	52.9 KB
13.1 SI Rebar Sizes.pdf.pdf	43.6 KB
13.4 Canadian Rebar Sizes.pdf.pdf	42.6 KB
2.1 Concrete Design Codes Available in ETABS.pdf.pdf	35.5 KB
8.1 Example Used in the Tutorial for Non-Uniform Grid Spacing and Custom Story Data.pdf.pdf	29.8 KB
6.1 Example Used in the Tutorial for Uniform Grid Spacing and Simple Story Data.pdf.pdf	28.7 KB
2. Reinforced Cement Concrete Design Codes available in ETABS.txt	0.3 KB
/7. ETABS Basics/
11. Define Material Properties for Various Countries.mp4	62.2 MB
35. Draw Different types of Beams (Bezier,Spline,Straight Line,Curved Beams etc.).mp4	56.9 MB
15. Define Concrete Frame Section Properties.mp4	47.4 MB
19. Define Composite Frame Section Properties.mp4	32.9 MB
14. Define Tendon Sections.mp4	32.2 MB
9. Define European Code Material Properties.mp4	32.2 MB
36. Draw Beam, Column and Bracing in Elevation and 3-D view.mp4	31.5 MB
38. Define Various Types of Time History Functions.mp4	30.9 MB
8. Create Non-Uniform Grid Spacing and Custom Story Data.mp4	30.0 MB
6. Create uniform grid spacing and simple story data.mp4	29.0 MB
10. Define United States Material Properties.mp4	28.7 MB
24. Define Point Springs, Line Springs, Area Springs and Soil Profiles.mp4	24.0 MB
23. Define Structural Member Property with the help of Section Designer.mp4	23.9 MB
29. Draw Wall Stacks.mp4	18.9 MB
12. Define User Material Properties (Customizable Materials).mp4	18.7 MB
18. Define Predefined Structural Steel Properties from Defualt Structural Steel Libr.mp4	16.4 MB
16. Define Structural Steel SectionsMembers.mp4	15.6 MB
41. Define Load Patterns.mp4	13.9 MB
33. Quick Draw Secondary Beams.mp4	12.9 MB
39. Define Various Types of Response Spectrum Functions.mp4	12.5 MB
13. Define Reinforcing Bar Sizes.mp4	12.2 MB
31. Quick Draw Bracing in Elevation View.mp4	11.5 MB
25. Draw Rectangular Floor and Wall Objects.mp4	11.2 MB
32. Quick Draw Columns in Plan and 3-d View.mp4	11.2 MB
48. Select and Deselect Option.mp4	11.1 MB
47. Assign Restraints to Joint(Example Pinned, Fixed or Roller etc.).mp4	10.9 MB
34. Quick Draw Walls and Wall Openings.mp4	10.2 MB
42. Define Load Cases.mp4	10.2 MB
22. Define RCC Wall Sections.mp4	10.1 MB
30. Quick Draw Beams and Columns in Plan, Elevation and 3-D view.mp4	9.9 MB
20. Define RCC Slab Sections.mp4	8.9 MB
3. Unit System available.mp4	8.8 MB
52. Assign Shell Loads (Uniform , Non-Uniform and Load Sets etc.).mp4	8.6 MB
44. Define Modal Cases.mp4	7.5 MB
50. Assign Frame Loads(Point,Distributed, Trapezoidal and Temperature Loads).mp4	7.4 MB
5. Structural Steel Design Codes Available in ETABS.mp4	7.4 MB
4. Structural Steel Section Databases Library Available in ETABS.mp4	7.1 MB
43. Define Load Combinations.mp4	7.1 MB
2. Reinforced Cement Concrete Design Codes available in ETABS.mp4	6.9 MB
49. Assign Objects(beamsColumnsSlabs) to a Group and Define Them.mp4	6.3 MB
26. Draw Irregular Floor objects.mp4	6.2 MB
21. Define RCC Drop Section.mp4	5.9 MB
28. Draw Walls in Plan View.mp4	5.8 MB
51. Assign Joint Loads(Translational Force and Rotational Moment along all axis).mp4	5.6 MB
1. Introduction to the Welcome Screen.mp4	4.8 MB
40. Define Mass Source being used for Earthquake Analysis.mp4	4.7 MB
46. Define Diaphragms(Flexible or Semi Rigid).mp4	3.4 MB
27. Draw irregular Wall objects.mp4	2.9 MB
45. Define P-Delta Options(Two Options available).mp4	2.8 MB
37. Define Temperature Loads at a Joint.mp4	2.2 MB
17. Create an I section Property in ETABS.html	0.1 KB
7. Create uniform grid spacing and simple story data (US Units).html	0.1 KB
/8. Learn basic Modelling of a Structure and Design as per Euro codes/
1. Modelling, Analysis and Design of a Flat Slab Structure as per Euro Codes.mp4	64.4 MB
2. Create a Structural Model of the Building , Analyze and Design It.html	0.1 KB
/9. Design Raft Foundation in ETABS/
1. Theory Concepts for modelling Raft Foundation.mp4	189.6 MB
2. Modelling Raft Foundation in ETABS.mp4	179.2 MB
1.1 Mat Foundation PPT Used in the course.pdf.pdf	2.1 MB
Total files 197